Abstract
Generation of industrial byproducts has significantly increased due to the tremendous growth in industrialization. One such industrial waste is steel slag, which is a solid effluent of the steel manufacturing industry. India generates about 12MT of slag annually. However, steel slag is not utilized properly, which leads to severe environmental problems such as groundwater pollution, landfilling issues, etc. Slag is a dense material that is used as an alternative green material and is easily implementable in concrete. The variants in the slag are BF slag (BF), BOF slag (BOF), electrical arc furnace slag (EAF), and others. In last decade, many attempts were made to utilize the slag waste in construction industry, viz., in production of cement, railway, and road aggregate. Recently, researchers have successfully used steel slag as aggregate from various sources in the production of concrete. This review focuses on analyzing the properties of steel slag procured from various sources to understand the effect that it has on the properties of concrete, particularly in its fresh and hardened state while shedding light on the durability aspects. The paper also aims to determine the characteristics for advanced concrete types such as High Performance Concrete, Self-Compacting Concrete and Geopolymer Concrete. The study will help in providing a better understanding of the behavior of iron and steel slag aggregates in concrete and enable the efficient use of the same, reducing the consumption of natural aggregates.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Adegoloye G, Beaucour AL, Ortola S, Noumowé A (2015a) Concretes made of EAF slag and AOD slag aggregates from stainless steel process: Mechanical properties and durability. Constr Build Mater 76:313–321. https://doi.org/10.1016/j.conbuildmat.2014.12.007
Adegoloye G, Beaucour A, Ortola S, Noumowé A (2015b) Concretes made of EAF slag and AOD slag aggregates from stainless steel process : Mechanical properties and durability. Construct Build Mater 76:313–321. https://doi.org/10.1016/j.conbuildmat.2014.12.007
Alexander, Roesler JR (2015) Steel furnace slag aggregate expansion and hardened concrete properties. Cement Concrete Compos 60:1–9. https://doi.org/10.1016/j.cemconcomp.2015.04.006
Anastasiou, Georgiadis Filikas K, Stefanidou M (2014) Utilization of fine recycled aggregates in concrete with fly ash and steel slag. Construct Build Mater 50:154–161. https://doi.org/10.1016/j.conbuildmat.2013.09.037
Arribas I, Vegas I, San-josé JT, Manso JM (2014) Durability studies on steelmaking slag concretes. Mater Des 63:168–176. https://doi.org/10.1016/j.matdes.2014.06.002
Biskri Y, Achoura D, Chelghoum N, Mouret M (2017) Mechanical and durability characteristics of high performance concrete containing steel slag and crystalized slag as aggregates. Constr Build Mater 150:167–178. https://doi.org/10.1016/j.conbuildmat.2017.05.083
Brand AS, Roesler JR (2018) Interfacial transition zone of cement composites with steel furnace slag aggregates. Cement Concr Compos 86:117–129. https://doi.org/10.1016/j.cemconcomp.2017.11.012
Carlo, Gaddo V (2009) Mechanical and durability characteristics of concrete containing EAF slag as aggregate. Cement Concrete Compos 31(9):663–671. https://doi.org/10.1016/j.cemconcomp.2009.05.006
Ding Y, Cheng T, Liu P, Lee W (2017) Study on the treatment of BOF slag to replace fine aggregate in concrete. Constr Build Mater 146:644–651. https://doi.org/10.1016/j.conbuildmat.2017.04.164
Eleftherios, Papayianni I, Papachristoforou M (2014) Behavior of self compacting concrete containing ladle furnace slag and steel fiber reinforcement. Mater Design 59:454–460. https://doi.org/10.1016/j.matdes.2014.03.030
Gaurav, Das S, Ahmed AA, Saha S, Karmakar S (2015) Study of granulated blast furnace slag as fine aggregates in concrete for sustainable infrastructure. Procedia Soc Behav Sci 195:2272–2279. https://doi.org/10.1016/j.jhazmat.2017.04.013
Guo Y, Xie J, Zhao J, Zuo K (2019) Utilization of unprocessed steel slag as fine aggregate in normal- and high-strength concrete. Constr Build Mater 204:41–49. https://doi.org/10.1016/j.conbuildmat.2019.01.178
Gurpreet, Siddique R (2016) Effect of iron slag as partial replacement of fine aggregates on the durability characteristics of self-compacting concrete. Construct Build Mater 128:88–95. https://doi.org/10.1016/j.conbuildmat.2016.10.074
Huang, Xu G, Cheng H, Wang J, Wan Y, Chen H (2012) An overview of utilization of steel slag. Proced Environ Sci 16:791–801. https://doi.org/10.1016/j.proenv.2012.10.108
Jiang, Ling TC, Shi C, Pan SY (2018) Characteristics of steel slags and their use in cement and concrete—a review. Res Conserv Recycl 136:187–197. https://doi.org/10.1016/j.resconrec.2018.04.023
Joao, Tristão FA, Giacometti M, Meneguelli M, Moratti M, Teixeira JESL (2013) Effects of BOF steel slag and other cementitious materials on the rheological properties of self-compacting cement pastes. Construct Build Mater 40:1046–1053. https://doi.org/10.1016/j.conbuildmat.2012.11.039
Jose, San-JoseInigo Vegas Idoia I (2014) The performance of steel-making slag concretes in the hardened state. Mater Des 60:612–619. https://doi.org/10.1016/j.matdes.2014.04.030
Juan, Polanco JA, Losañez M, González JJ (2006) Durability of concrete made with EAF slag as aggregate. Cement Concrete Compos 28(6):528–534. https://doi.org/10.1016/j.cemconcomp.2006.02.008
Khan, Castel A, Akbarnezhad A, Foster SJ, Smith M (2016) Utilisation of steel furnace slag coarse aggregate in a low calcium fly ash geopolymer concrete. Cement Concrete Res 89:220–229. https://doi.org/10.1016/j.cemconres.2016.09.001
Kriskova L, Pontikes Y, Cizer Ö, Mertens G, Veulemans W, Geysen D, Blanpain B (2012) Effect of mechanical activation on the hydraulic properties of stainless steel slags. Cem Concr Res 42(6):778–788. https://doi.org/10.1016/j.cemconres.2012.02.016
Lim JS, Cheah CB, Ramli MB (2019) The setting behavior, mechanical properties and drying shrinkage of ternary blended concrete containing granite quarry dust and processed steel slag aggregate. Constr Build Mater 215:447–461. https://doi.org/10.1016/j.conbuildmat.2019.04.162
Liu, Zha K, Chen D (2011) Possibility of concrete prepared with steel slag as fine and coarse aggregates: a preliminary study. Procedia Eng 24:412–416. https://doi.org/10.1016/j.proeng.2011.11.2667
Luigi, Buoso A, Coffetti D, Kara P, Lorenzi S (2016) Electric arc furnace granulated slag for sustainable concrete. Construct Build Mater 123:115–119. https://doi.org/10.1016/j.conbuildmat.2016.06.142
Manjunath, Narasimhan MC (2018) An experimental investigation on self-compacting alkali activated slag concrete mixes. J Build Eng 17:1–12. https://doi.org/10.1016/j.jobe.2018.01.009
Manjunath, Narasimhan MC, Umesh KM, Shivam K, Bala Bharathi UK (2019) Studies on development of high performance, self-compacting alkali activated slag concrete mixes using industrial wastes. Construct Build Mater 198:133–147. https://doi.org/10.1016/j.conbuildmat.2018.11.242
Manso JM, Gonzalez JJ, Polanco JA (2004) Electric arc furnace slag in concrete. J Mater Civ Eng 16(6):639–645. https://doi.org/10.1061/(asce)0899-1561(2004)16:6(639)
Maslehuddin, Sharif AM, Shameem M, Ibrahim M, Barry MS (2003) Comparison of properties of steel slag and crushed limestone aggregate concretes. Construct Build Mater 17(2):105–112. https://doi.org/10.1016/S0950-0618(02)00095-8
Mo L, Zhang F, Deng M, Jin F, Al-Tabbaa A, Wang A (2017) Accelerated carbonation and performance of concrete made with steel slag as binding materials and aggregates. Cement Concr Compos 83:138–145. https://doi.org/10.1016/j.cemconcomp.2017.07.018
Nitendra, Ravi Shankar AU, Mithun BM (2016) Durability studies on eco-friendly concrete mixes incorporating steel slag as coarse aggregates. J Clean Prod 129:437–448. https://doi.org/10.1016/j.jclepro.2016.04.033
Pang B, Zhou Z, Xu H (2015) Utilization of carbonated and granulated steel slag aggregate in concrete. Constr Build Mater 84:454–467. https://doi.org/10.1016/j.conbuildmat.2015.03.008
Pellegrino C, Faleschini F (2013) Experimental behavior of reinforced concrete beams with electric arc furnace slag as recycled aggregate. ACI Mater J 110(2):197–205. https://doi.org/10.14359/51685534
Qasrawi H (2018) Fresh properties of green SCC made with recycled steel slag coarse aggregate under normal and hot weather. J Clean Prod 204:980–991. https://doi.org/10.1016/j.jclepro.2018.09.075
Samir, El-Dieb AS, Bedir MS (2012) Performance of concrete mixtures made with electric arc furnace (EAF) steel slag aggregate produced in the Arabian Gulf region. Construct Build Mater 34:249–256. https://doi.org/10.1016/j.conbuildmat.2012.02.012
Santamaria, Orbe A, Losañez MM, Skaf M, Ortega-Lopez V, González JJ (2017) Self-compacting concrete incorporating electric arc-furnace steelmaking slag as aggregate. Mater Des 115:179–193. https://doi.org/10.1016/j.matdes.2016.11.048
Saveria, Ruello ML, Sani D (2016) Electric arc furnace slag as natural aggregate replacement in concrete production. Cement Concr Compos 66:66–72. https://doi.org/10.1016/j.cemconcomp.2015.10.004
Saxena S, Tembhurkar AR (2018) Impact of use of steel slag as coarse aggregate and wastewater on fresh and hardened properties of concrete. Constr Build Mater 165:126–137. https://doi.org/10.1016/j.conbuildmat.2018.01.030
Sheen Y, Le D, Sun T (2015) Innovative usages of stainless steel slags in developing self-compacting concrete. Construct Build Mater 101:268–276. https://doi.org/10.1016/j.conbuildmat.2015.10.079
Subathra Devi, Gnanavel BK (2014) Properties of concrete manufactured using steel slag. Procedia Engineering 97:95–104. https://doi.org/10.1016/j.proeng.2014.12.229
Wang G (2010) Determination of the expansion force of coarse steel slag aggregate. Constr Build Mater 24(10):1961–1966. https://doi.org/10.1016/j.conbuildmat.2010.04.004
Yeong, Le DH, Sun TH (2015) Innovative usages of stainless steel slags in developing self-compacting concrete. Construct Build Mater 101:268–276. https://doi.org/10.1016/j.conbuildmat.2015.10.079
Yeong, Sun TH (2014) Properties of green concrete containing stainless steel oxidizing slag resource materials. Constr Build Mater 50:22–27. https://doi.org/10.1016/j.conbuildmat.2013.09.017
Yildirim IZ, Prezzi M (2011) Chemical, mineralogical, and morphological properties of steel slag. Adv Civil Eng. https://doi.org/10.1155/2011/463638
Yüksel İ (2017) A review of steel slag usage in construction industry for sustainable development. Environ Dev Sustain 19(2):369–384. https://doi.org/10.1007/s10668-016-9759-x
Yu X, Tao Z, Song T, Pan Z (2016) Performance of concrete made with steel slag and waste glass. Constr Build Mater 114:737–746. https://doi.org/10.1016/j.conbuildmat.2016.03.217
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Jagadisha, Balakrishna Rao, K., Nayak, G., Adithya Shenoy, B. (2021). A Review on Properties of Sustainable Concrete Using Iron and Steel Slag Aggregate as Replacement for Natural Aggregate. In: Das, B.B., Nanukuttan, S.V., Patnaik, A.K., Panandikar, N.S. (eds) Recent Trends in Civil Engineering. Lecture Notes in Civil Engineering, vol 105. Springer, Singapore. https://doi.org/10.1007/978-981-15-8293-6_7
Download citation
DOI: https://doi.org/10.1007/978-981-15-8293-6_7
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-8292-9
Online ISBN: 978-981-15-8293-6
eBook Packages: EngineeringEngineering (R0)