Abstract
Solar air heater (SAH) is a heat exchanger device that converts solar radiation into thermal energy, using solar thermal technology (energy from the sun is trapped and absorbed to heat the air). The conventional SAH is inefficient due to poor heat transfer characteristics from the absorber. In this present study, a parallel flow SAH consisting of circular fins attached to the absorber is designed to enhance the heat transfer rate. Computational fluid dynamics (CFD)-based numerical simulation is carried out in ANSYS Fluent using the k–ɛ turbulence model with enhanced wall treatment for different mass flow rates and different solar radiation intensities. The simulation output is validated using experimental results which are available in the literature. The heat transfer characteristics, absorber, and outlet air temperature are shown using contours. The mean deviation in the outlet air temperature predicted by the simulation is found to be ~7%. The simulation and experimental results conclude that surface-to-surface radiation model can accurately predict the fluid flow behavior inside the SAH.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Abbreviations
- \(\rho\) :
-
Density, kg/m3
- k :
-
Turbulent kinetic energy, m2/s2
- ɛ :
-
Dissipation rate
- P :
-
Pressure
- \(u\) :
-
Velocity, m/s
- \(T\) :
-
Temperature, K
- \(\mu\) :
-
Dynamic viscosity, kg/m s
- \(\Gamma\) :
-
Molecular diffusivities, µ/Pr
- \(\Gamma _{{\text{t}}}\) :
-
Thermal diffusivities, µt/Prt
- K :
-
Thermal conductivity, W/mK
References
Singh I, Singh S (2018) CFD analysis of solar air heater duct having square wave profiled transverse ribs as roughness elements. Sol Energy 162:442–453
Kumar R, Goel V, Kumar A, Khurana S, Singh P, Bopche SB (2018) Numerical investigation of heat transfer and friction factor in ribbed triangular duct solar air heater using computational fluid dynamics (CFD). J Mech Sci Technol 32(1):399–404
Prasad K, Mullick SC (1985) Heat transfer characteristics of a solar air heater used for drying purposes. Appl Energy 13:83–93
Ye-Di Liu L, Diaz A, Suryanarayana NV (1984) Heat transfer enhancement in air heating fiat-plate solar collectors. J Sol Energy Eng 106:358–363
Kumar R, Geol V, Kumar A (2017) A parametric study of the 2D model of solar air heater with elliptical rib roughness using CFD. J Mech Sci Technol 31(2):959–964
Rajarajeswari K, Alok P, Sreekumar A (2018) Simulation and experimental investigation of fluid flow in porous and non-porous solar air heaters. Sol Energy 171:258–270
Raam Dheep G, Sreekumar A (2019) Experimental studies on energy and exergy analysis of a single-pass parallel flow solar air heater. ASME J Sol Energy Eng 142(1):011003. https://doi.org/10.1115/1.4044127
ANSYS fluent user Guide, release 19.2
Yadav AS, Bhagoria JL (2013) Heat transfer and fluid flow analysis of solar air heater: a review of CFD approach. Renew Sustain Energy Rev 23:60–79
https://www.afs.enea.it/project/neptunius/docs/fluent/html/th/node101.htm
Acknowledgements
The authors are profoundly grateful to CADFEM India and ANSYS Inc.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Alok, P., Javvadi, S.C.T., Konchada, P.K., Dheep, G.R. (2021). Numerical Simulation of a Single-Pass Parallel Flow Solar Air Heater with Circular Fins Using S2S Radiation Model. In: Revankar, S., Sen, S., Sahu, D. (eds) Proceedings of International Conference on Thermofluids. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-7831-1_10
Download citation
DOI: https://doi.org/10.1007/978-981-15-7831-1_10
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-7830-4
Online ISBN: 978-981-15-7831-1
eBook Packages: EngineeringEngineering (R0)