Skip to main content
SpringerLink
Log in

Optimization, Design and Analysis of a MEMS Microphone with PVDF as a Structural Layer for Cochlear Implant Applications

  • Conference paper
  • First Online:
Nanoelectronics, Circuits and Communication Systems

Part of the book series: Lecture Notes in Electrical Engineering ((LNEE,volume 692))

Abstract

The cochlear implants are the most advanced technology for hearing aid impairments. It consists of a microphone or sensor, speech processor, stimulator, and the electrodes. The speech processor in the implant uses the MEMS microphones to pick the signals and process. Here we have proposed a model of MEMS microphone with PVDF as a structural layer and aids in converting the received sound signal into electrical impulses. The proposed device modeling overcomes the main bottlenecks of CIs in terms of footprint, volume, mass, and stimulation signal. A simplified analytical model of PVDF membrane for a microphone application is optimized and developed. The PVDF membrane with its piezoelectric phenomenon acts as a frequency separator for a given acoustic pressure, and it undergoes vibration and accumulation of static charges on the surface of the material that is captured using appropriate signal conditioning circuits with charge amplifiers and filters. First, the geometry with optimized parameters using mathematical modeling was built using COMSOL Multiphysics. The optimization was carried out using predetermined values of thickness and width as the design parameters to form a structure for the dominant resonant frequency. The optimized model built-in geometry of COMSOL is analyzed to the next process that included meshing, setting the environment for the membrane to act as an acoustic model using appropriate multiphysics and perform the study using time-dependent variables and frequency domain. The membrane is analyzed for stress distribution along the walls and the center. Similar studies are carried out for PVDF membrane with a patch of PZT with optimized dimensions. A comparative analysis of the membrane for its acoustic property is to serve as a membrane in a MEMS microphone. A detailed analysis for a PVDF membrane is in terms of resonant frequency, stress, maximum displacement for the input acoustic pressure. This approach of simulating the optimized design for a structure to be a membrane in a MEMS acoustic sensor is validated, and thus, demonstrating it can be reliably used as a piezoelectric membrane in a MEMS process of a product.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Log in via an institution
Chapter
USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD 259.00
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book
USD 329.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info
Hardcover Book
USD 329.99
Price excludes VAT (USA)
  • Durable hardcover edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

References

  1. Leinenbach, C., Van Teeffelen, K., Laermer, F., Seidel, H.: A new capacitive type MEMS microphone. In: 2010 IEEE 23rd International Conference on Micro Electro Mechanical Systems (MEMS), pp. 659–662, Wanchai, Hong Kong, China (2010)

    Google Scholar 

  2. Grubb JA (1982) Piezoelectric plastic microphones. Electro-component. Sci. Technol. 9:197–203

    Google Scholar 

  3. Loeppert, P.V.: The first commercialized MEMS microphone. In: Solid-State Sensors, Actuators, and Microsystems Workshop, vol. 2006 (2006)

    Google Scholar 

  4. Dehé, A., Wurzer, M., Füldner, M., Krumbein, U.: Design of a poly silicon MEMS microphone for high signal-to-noise ratio. In: 2013 Proceedings of the European Solid-State Device Research Conference (ESSDERC), pp. 292–295. Bucharest, Romania (2013)

    Google Scholar 

  5. Dixon-Warren, S.: Survey of MEMS microphone technology 2016, July 2018, http://www.chipworks.com/about-chipworks/overview/blog/survey-of-mems-microphone-technology

  6. AN4426 application note tutorial for MEMS microphones.” Tech. Rep., Tech. Rep., ST Microelectronics (2017)

    Google Scholar 

  7. A MEMS condenser microphone based acoustic receiver for totally implantable cochlear implants, Department of Otorhinolaryngology, Head and Neck Surgery

    Google Scholar 

  8. Muralidhar, Y.C., Somesh, B.S., Neethu, K.N., Yeshashwini, L.R., Veda S.N., Pinjare, S.L.: Design And Simulation Of Silicon And Polymer Based Piezoelectric MEMS Microphone. In: International Conference on Emerging Trends in Communication, Control, Signal Processing and Computing Applications (C2SPCA), pp. 1–6 (2013)

    Google Scholar 

  9. Kim, J.Y.H., Liu, Y., Scianmarello, N., Tai, Y.C.: Piezoelectric Parylene-C Mems Microphone. In: Transducers & Eurosensors XXVII: The 17th International Conference on Solid-State Sensors, Actuators and Microsystems, pp. 39–42 (2013)

    Google Scholar 

  10. Bauer, R., Zhang, Y., Jackson, J.C., Whitmer, W.M., Brimijoin, W.M., Akeroyd, M., Uttamchandani, D., Windmill, J.F.C: Housing influence on multi-band directional MEMS microphones inspired by Ormiaochracea. IEEE Sensors, pp. 1–3 (2016)

    Google Scholar 

  11. Cezary, M., Wojciech, Z., Andrzej, N.: “Parameterized model of MEMS microphone in COMSOL multiphysics. In: 14th International Conference The Experience of Designing and Application of CAD systems in Microelectronics (CADSM), pp. 428–431 (2017)

    Google Scholar 

  12. Matthew D. Williams, Benjamin A. Griffin, Tiffany N Reagan, James R. Underbrink and Mark Sheplak, “An AlN MEMS Piezoelectric Microphone for Aeroacoustic Applications”, Journal of Micromechanical Systems, pp. 270–283 (2012)

    Google Scholar 

  13. Schrag, G., Reutter, T., Wachutka, G.: Finite element simulations combined with statistical analysis of variance: exploring the potential of piezoelectric MEMS microphones. In: The 17th International Conference on Solid-State Sensors, Actuators and Microsystems, pp. 1452–1455 (2013)

    Google Scholar 

  14. Song, K., Zhan, W., Xu, W., Lee, Y.-L.: Scaling analysis of capacitive MEMS microphones considering residual stress. In: 11th IEEE Annual International Conference on Nano/Micro Engineered and Molecular Systems (NEMS), pp. 184–187 (2016)

    Google Scholar 

  15. Xu, J., Headings, L.M., Dapino, M.J.: High sensitivity polyvinylidene fluoride microphone based on area ratio amplification and minimal capacitance. IEEE Sensors J. 2839–2847 (2015)

    Google Scholar 

  16. Liu, W., Han, M., Sun, X., Zhang, H.: Fabrication of spiral-shaped PVDF cantilever based vibration energy harvester. In: The 9th IEEE International Conference on Nano/Micro Engineered and Molecular Systems (NEMS), pp. 458–461. Waikiki Beach, HI https://doi.org/10.1109/nems.2014.6908849

  17. Han, H., Nakagawa, Y., Takai, Y., Kikuchi, K., Tsuchitani, S.: PVDF film micro fabrication for the robotics skin sensor having flexibility and high sensitivity. In: 2011 Fifth International Conference on Sensing Technology, pp. 603–606. Palmerston North https://doi.org/10.1109/icsenst.2011.6137052

  18. Kim, H., Torres, F., Mingyue, L., Yirong, L., Tzu-Liang B.T.: Fabrication and Characterization of 3D Printed BaTiO3/PVDF Nanocomposites. J Compos Mater 52(2), 197–206 (2018). https://doi.org/10.1177/0021998317704709

  19. Kang, G.D., Cao, Y.M.: Application and modification of poly(vinylidene fluoride) (PVDF) membranes—A review. J. Membr. Sci. 463, 145–165 (2014)

    Google Scholar 

  20. Lang SB, Muensit S (2006) Review of some lesser-known applications of piezoelectric and pyroelectric polymers. Appl Phys A 85:125–134

    Article  Google Scholar 

  21. Jia, Y.F., Chen, X.J., Sh, Q., Ni, L.H., Ju, L.I.: Dependence of the impact response of polyvinylidene fluoride sensors on their supporting materials elasticity. Sensors 13, 8669–8678 (2013)

    Google Scholar 

  22. Park S, Guan X, Kim Y, Creighton F, Wei E, Kymissis IJ, Nakajima HH, Olson ES (2018) PVDF-based piezoelectric microphone for sound detection inside the cochlea: toward totally implantable cochlear implants. Trends Hearing 22:2331216518774450

    Article  Google Scholar 

  23. Daniel, Z., Karl-Ludwig, K.: Classification and simulation method for piezoelectric PVDF sensors

    Google Scholar 

  24. Weigold, J.W., Brosnihan, T.J., Bergeron, J., Zhang, X.: A MEMS condenser microphone for consumer applications. In: 19th IEEE International Conference on Micro Electro Mechanical Systems, pp. 86–89. Istanbul, Turkey (2006). View at Publisher. View at Google Scholar

    Google Scholar 

  25. Goto, M., Iguchi, Y., Ono, K., et al.: High-performance condenser microphone with single-crystalline silicon diaphragm and backplate. IEEE Sensors J. 7(1). 4–10 (2007). View at Publisher.·View at Google Scholar.·View at Scopus

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of Electronic and Communication Engineering, Rashtreeya Vidyalaya College of Engineering, Bengaluru, India

    Sudha R. Karbari, Shashank Jain, Shivam Gaur, M. Uttara Kumari & G. Shireesha

  2. Department of Physics, Rashtreeya Vidyalaya College of Engineering, Bengaluru, India

    Sudha R. Karbari, Shashank Jain, Shivam Gaur, M. Uttara Kumari & G. Shireesha

Authors
  1. Sudha R. Karbari
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Shashank Jain
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Shivam Gaur
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. M. Uttara Kumari
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. G. Shireesha
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Shashank Jain .

Editor information

Editors and Affiliations

  1. VLSI Design Group, Department of Electronics and Communication Engineering, Birla Institute of Technology, Ranchi, India

    Vijay Nath

  2. Department of Computer Science and Engineering, Kalyani University, Kolkata, India

    J.K. Mandal

Rights and permissions

Reprints and permissions

Copyright information

© 2021 The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.

About this paper

Check for updates. Verify currency and authenticity via CrossMark

Cite this paper

Karbari, S.R., Jain, S., Gaur, S., Uttara Kumari, M., Shireesha, G. (2021). Optimization, Design and Analysis of a MEMS Microphone with PVDF as a Structural Layer for Cochlear Implant Applications. In: Nath, V., Mandal, J. (eds) Nanoelectronics, Circuits and Communication Systems. Lecture Notes in Electrical Engineering, vol 692. Springer, Singapore. https://doi.org/10.1007/978-981-15-7486-3_37

Download citation

  • DOI: https://doi.org/10.1007/978-981-15-7486-3_37

  • Published:

  • Publisher Name: Springer, Singapore

  • Print ISBN: 978-981-15-7485-6

  • Online ISBN: 978-981-15-7486-3

  • eBook Packages: EngineeringEngineering (R0)

Publish with us

Policies and ethics

Search

Navigation