Abstract
Hybrid natural fiber composites can be used to meet the present technological development and innovation needs. These natural fibers are environmentally friendly and have a better economical value. This chapter discusses the fabrication and study on mechanical characteristics of hybrid composites which consist of neem, kenaf and GFRP. Here, the composite was fabricated by hand layup technique. The arrangements of fibers are the combinations of neem and kenaf fibers placed alternatively to form the hybrid composites. For better adhesion between fibers, the matrix namely Epoxy resin LY556 and HY951 hardener is used in the ratio of 10:1. Glass fiber composites are enclosed on both the sides in order to improve the surface finish and also to avoid damages occurs during loading condition. The volumetric fraction is one-third of the total volume occupied by neem and kenaf fiber. Test result shows that hybrid natural composite has excellent impact and hardness properties.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Navaranjan N, Neitzert T (2017) Impact strength of natural fibre composites measured by different test methods a review. In: MATEC web of conferences, vol 109
Vijaya Ramnath B, Elanchezhian C, Nirmal PV, Prem Kumar G, Santhosh Kumar V, Karthick S, Rajesh S, Suresh K (2014) Experimental investigation mechanical behavior of jute-flax based glass fiber reinforced composite. Fibers Poly 15:1251–1262
Rajesh S, Vijaya Ramnath B (2018) Investigation of hardness and impact property of a kevlar composite. Int J Appl Eng Res 10:6215–6218
Srinivasan VS, RajendraBoopathy S, Vijaya Ramnath B (2015) Investigation of flexural property of kenaf-flax hybrid composite. Appl Mech Mat 10
Vijayakumar T, Ramana KV, Balamurali KV, Shahjahan P (2012) Tensile & impact behaviour of neem fiber-polyester composites. Gold Res Thoughts 2
Vijaya Ramnath B, Rajesh S, Elanchezhian C, Elanchezhian C, Santosh Shankar A, Pithchai Pandian S, Vickneshwaran S, SundarRajan R (2016) Investigation on mechanical behaviour of twisted natural fiber hybrid composite fabricated by vacuum assisted compression molding technique. Fibers Poly 17:80–87
Sakthivel M, Vijayakumar S, Vijaya Ramnath B (2018) Investigation on mechanical and thermal properties of stainless-steel wire mesh-glass fibre reinforced polymer composite. Silicon 10:1–9
Subasinghe A, Somashekar AA, Bhattacharyya D (2018) Effects of wool fibre and other additives on the flammability and mechanical performance of polypropylene/kenaf composites. Comp Part B 136:168–176
Vijaya Ramnath B, Manickavasagam VM, Elanchezhian C, Vinodh Krishna C, Karthik S, Saravanan K (2014) Determination of mechanical properties of intra-layer abaca–jute–glass fiber reinforced composite. Mat Design 60:643–652
Ramnath BV, Arvind R, Dinesh I, Prasadh MH (2018) Review on natural fiber composites. In: IOP conference series: materials science and engineering, vol 390
Pickering KL, AruanEfendy MG, Le TM (2016) A review of recent developments in natural fibre composites and their mechanical performance. Comp Part A Appl Sci Manuf 83:98–112
Subasinghe ADL, Das R, Bhattacharyya D (2015) Fiber dispersion during compounding/injection molding of PP/kenaf composites flammability and mechanical properties. Mat Design 86:500–507
Tharazi AB, Sulonga N, Muhamada CHC, Harona D, Tholibona NF, Ismaila MKF, Radzia M, Razaka Z (2017) Optimization of hot press parameters on tensile strength for unidirectional long kenaf fiber reinforced polylactic-acid composite. Proc Eng 184:478–485
Lima ZY, Putraa A, Nora MJM, Yaakobb MY (2018) Sound absorption performance of natural kenaf fibres. Appl Acoust 130:107–114
Bharath VRR, Ramnath BV, Manoharan N (2015) Kenaf fibre reinforced composites: a review. ARPN J Eng Appl Sci 10:5483–5485
Vijaya Ramnath B, Junaid Kokan S, Niranjan Raja R, Sathyanarayanan R, Elanchezhian C, Rajendra Prasad A, Manickavasagam VM (2013) Evaluation of mechanical properties of abaca–jute–glass fibre reinforced epoxy composite. Mat Design 51:357–366
Sharavanan S, Vijayaramnath B, Elanchezhian C, Rajesh S (2018) Experimental investigation of tensile and impact behaviour of hemp flax hybrid composite. Int J Mech Prod Eng Res Devel (IJMPERD) 8:549–556
Manickavasagam VM, Ramnath BV, Elanchezhian C, Aravinthan V (2018) Natural fibre composites—a review. In: IOP conference series: materials science and engineering, vol 390
Rajesh S, Vijaya Ramnath B, Elanchezhian C, Abhijith M, Dinesh Riju R, KathirKishan K (2018) Investigation of tensile behavior of kevlar composite. Mat Today Proc 5:1156–1161
Bajuria F, Mazlana N, Ishaka MR, Imatomi J (2016) Flexural and compressive properties of hybrid kenaf/silica nanoparticles in epoxy composite. Proc Chem 19: 955–960
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Vijaya Ramnath, B., Rajesh, S., Elanchezhian, C., Pon Senthil Kumar, G. (2021). Determination of Impact and Hardness Properties of Neem-Kenaf Fiber Reinforced Polymer Composites. In: Rajmohan, T., Palanikumar, K., Davim, J.P. (eds) Advances in Materials and Manufacturing Engineering. Springer Proceedings in Materials, vol 7. Springer, Singapore. https://doi.org/10.1007/978-981-15-6267-9_35
Download citation
DOI: https://doi.org/10.1007/978-981-15-6267-9_35
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-6266-2
Online ISBN: 978-981-15-6267-9
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)