Abstract
The reason behind development of this paper is to identify the ideal process parameters to be set for the drilling of hybrid FRP (kenaf and banana) composite using HSS drill bits (5, 10, 15 mm) coated with tungsten carbide by means of statistical reproduction of the delamination factor and machining force using Taguchi-grey relational analysis. The contemplated process parameters are feed, speed and drill diameter. With the help of Taguchi’s L-27 factorial design the trails were carried out. Three factors, three-level Taguchi orthogonal array design in grey relational analysis was used to carry out the trial study. In order to identify the damage around the drill region, video measuring system (VMS) was used. ‘Minitab 18’ was used to examine the data collected by taking advantage of the various statistical and graphical tools available. Variance examination helps in identifying best notable variable.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Jenarthanan MP, Jeyapaul R (2014) Machinability study of carbon fibre reinforced polymer (CFRP) composites using design of experiments technique. Pigm Resin Technol 43(1):35–44
Aydin H, Bayram A, Esme U, Kazancoglu Y, Guven O (2010) Application of grey relation analysis (GRA) and Taguchi method for the parametric optimization of friction stir welding (FSW) process. Mater Technol 44:205–211
Ashrafi SA, Sharif S (2012) Assessment of hole quality and thrust force when drilling CFRP/AI Stack using carbide tools. Appl Mech Mater 234:23–33
Raja T, Anand P, Sundarraj M, Karthick M, Kannappan A (2018) Failure analysis of natrual fibre reinforced polymer composite leaf spring. Int J Mech Eng Technol 9(2):686–689
Palanikumar K, Karunamoorthy L, Karthikeyan R (2006) Assessment of factors influencing surface roughness on the machining of glass fiber reinforced polymer composites. J Mater Design 27(2):862–871
Feito N, López-Puente J, Santiuste C, Miguélez MH (2014) Numerical prediction of delamination in CFRP drilling. Compos Struct 108:677–683
Jenarthanan MP, Raahul Kumar S, Vinoth S (2017) Multi-objective optimisation on end milling of hybrid fibre-reinforced polymer composites using GRA. Pigm Resin Technol 46(3):194–202
Datta S, Bandyopadhyay A, Pal PK (2008) Grey-based Taguchi method for optimization of bead geometry in submerged arc bead-on-plate welding. Int J Adv Manuf Technol 39(11–12):1136–1143
Slavek N, Jović A (2012) Application of grey system theory to software projects ranking. Automatika J Control Measur Electron Comput Commun 53(3):284–293
Sakthivel M, Vijayakumar S, Jenarthanan MP (2017) Grey-fuzzy logic to optimise process parameters in drilling of glass fibre reinforced stainless steel mesh polymer composite. Pigm Resin Technol 46(4):276–285
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Alagappan, K.M., Vijayaraghavan, S., Giridharan, R., Jenarthanan, M.P. (2020). Experimental Investigation on Drilling of Kenaf-Banana Fiber-Reinforced Hybrid Fibre-Reinforced Polymer Composites. In: Yang, LJ., Haq, A., Nagarajan, L. (eds) Proceedings of ICDMC 2019. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-3631-1_32
Download citation
DOI: https://doi.org/10.1007/978-981-15-3631-1_32
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-3630-4
Online ISBN: 978-981-15-3631-1
eBook Packages: EngineeringEngineering (R0)