Abstract
Gas film seal technology is becoming increasingly important as an advanced new rotary shaft seal technology in aviation engines and industrial gas turbines. In this paper the impacts of several parameters of T-groove cylindrical gas seal such as groove number, groove depth, groove width ratio, dam groove width ratio and floating ring length on the steady-state characteristics of cylinder film seal are studied in detail by the method of control variable using computational fluid dynamics software, and the focuses are on the pressure distribution, the gas film stiffness, and the leakage. Results show that with the increase of the number of grooves, the gas film stiffness increases gradually, but the leakage and leakage stiffness ratio decrease. The results also show that with the increase of groove depth, there is a maximum value for the gas film stiffness and a minimum value forleakage. This research plays an important role in guiding the design and the application of cylindrical gas seal.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Liu, J., Zhang, Z.: Prospect of aero engine power transmission system in the 21st century. J. Aerosp. Power 16(2), 4 (2001) 108–114. (in Chinese)
Cai, R., Gu, B., Song, P.: Process Equipment Sealing Technology, 2nd edn. Chemical Industry Press, Beijing (2006). (in Chinese)
Ma, G., Xi, P., Shen, X., Hu, G.: Analysis of quasi2dynamic characteristics of compliant floating ring gas cylinder seal. J. Aerosp. Power 25(5), 1190–1196 (2010). (in Chinese)
Gang, M., Guangzhou, X.U., Shen, X.: Design and analysis for spiral grooved cylindrical gas seal structural parameter. Lubr. Sealing 32(4), 127–130 (2007)
Nakane, H., Maekawa, A.: The development of high-performance leaf seals. J. Eng. Gas Turbine Power 126(3), 42–350 (2004)
Ma, G., Sun, X.-J., Luo, X.-H., He, J.: Numerical simulation analysis of steady-state properties of gas face and cylinder film seal. Beijing: J. Beijing Univ. Aeronaut. Astronaut. 40(4), 439–443 (2014)
Ma, G., Cui, X., Shen, X., Hu, G.: Analysis of performance and interface structure of cylindrical film seal. J. Aeronaut. Power 26(1), 2610–2615 (2011)
Ma, G., Sun, X., He, J., Shen, X.: Simulation analysis of gas face and cylinder film seal by parametric m odeling. Lubr. Sealants 38(7), 8–11 (2013)
Jing, X.U.: Ananlytical and Experimental Investigations on the End Face Deformation Mechanisms for High Pressure Sprial Grooved Dry Gas Seals. Zhejiang University of Technology, Hangzhou (2014)
Wang, X., Liu, M., Hu, X., Sun, J.: The Influence of T groove layout on the performance characteristic of cylinder gas seal. In: Wang, K., Wang, Y., Strandhagen, J., Yu, T. (eds) Advanced Manufacturing and Automation VIII. Lecture Notes in Electrical Engineering, vol. 484, pp. 701–707 (2018)
Acknowledgement
This research was fully supported by the National Natural Science Foundation of China (No. 51765024) and the Youth Project of Science and Technology Department of Yunnan Province (No. 2017FD132). We gratefully acknowledge the relevant organizations.
Author information
Authors and Affiliations
Corresponding authors
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Sun, J., Liu, M., Xu, Z., Liao, T., Hu, X. (2020). Effect of T-groove Parameters on Steady-State Characteristics of Cylindrical Gas Seal. In: Wang, Y., Martinsen, K., Yu, T., Wang, K. (eds) Advanced Manufacturing and Automation IX. IWAMA 2019. Lecture Notes in Electrical Engineering, vol 634. Springer, Singapore. https://doi.org/10.1007/978-981-15-2341-0_53
Download citation
DOI: https://doi.org/10.1007/978-981-15-2341-0_53
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-2340-3
Online ISBN: 978-981-15-2341-0
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)