Abstract
Based on the elastoplastic theory of materials, the distribution of residual stress is analyzed by the Huang’s model calculation to obtain the optimum autofrettage pressure considering the strain hardening effect of the plastic material and the Bauschinger effect. The BLH simulating model is set up by applying 16 different autofrettage stresses from 400 MPa to 1200 MPa. The optimized autofrettage stress distribution was achieved by comparing the working stress of 16 groups of experiments. Then, the Huang’s model is simplified, and the trend of working stress with residual stress is obtained. The reliability of the simplified model is verified, which provides a basis for autofrettage high-pressure cylinders design.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Parker, A.P.: Autofrettage of open-end tubes—pressures, stresses, strains, and code comparisons. J. Press. Vessel Technol. 123(271), 8 (2001)
Bhatnagar, R.M.: Modelling, validation and design of autofrettage and compound cylinder. Eur. J. Mechan. 39, 17–25 (2013)
Gibson, M.C.: Determination of Residual Stress Distributions in Autofrettaged Thick-Walled Cylinders. Cranfield University, Cranfield (2008)
Peng, X., Balendra, R.: Application of a physically based constitutive model to metal forming analysis. J. Mater. Process. Technol. 145(2), 180–188 (2004)
Huang, X.P., Cui, W.: Effect of bauschinger effect and yield criterion on residual stress distribution of autofrettaged tube. ASME J. Press. Vessel Technol. 128(2), 212–216 (2006)
Yuan, G.: Analysis of residual stress for autofrettaged ultrahigh pressure vessels. Zhongguo Jixie Gongcheng/China Mech. Eng. 22(5), 536–540 (2011)
Yuan, G.: Numerical analysis of residual stress and strength of autofrettage high pressure cylinder finishing. Mech. Des. Manuf. (03), 229–232 (2015)
Zhu, R.: Study on autofrettage of cylindrical pressure vessels. J. Mech. Eng. 46(6), 126–133 (2010)
Fu, S., Yang, G.: A nonlinear combined hardening model for residual stress analysis of autofretted thick-walled cylinder Acta Armamentarii 07 (2018)
Yang, Z.Y., Qian, L.F.: Research on fatigue damage of composite thick wall cylinder. Chin. J. Appl. Mech. 30(03), 378–383 (2013)
Author information
Authors and Affiliations
Corresponding authors
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Li, G., Li, Y., Shi, J., Zhang, S., Mitrouchev, P. (2020). Analysis of Residual Stress for Autofrettage High Pressure Cylinder. In: Wang, Y., Martinsen, K., Yu, T., Wang, K. (eds) Advanced Manufacturing and Automation IX. IWAMA 2019. Lecture Notes in Electrical Engineering, vol 634. Springer, Singapore. https://doi.org/10.1007/978-981-15-2341-0_3
Download citation
DOI: https://doi.org/10.1007/978-981-15-2341-0_3
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-2340-3
Online ISBN: 978-981-15-2341-0
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)