Abstract
Today’s exigency to furnish more sustainable energy requires materials and expedients with enhanced or even new functionalities. Harvesting solar energy using stable, cheap, and environmentally friendly materials, for solar water splitting and dye degradation, is an attractive approach. The present chapter is focused on the recently reported perovskites oxides for the photocatalytic applications such as dye degradation, CO2 reduction, and water splitting under UV or visible light irradiation. Material preparation and characterization are two essential parameters; former is to get materials with desired structure and physicochemical property, and latter gives the information of the textural structures and properties of the synthesized photocatalysts. In this regard, the present chapter provides an insight into information of preparation and photocatalytic application of selected ABO3-based photocatalysts. It opens up a new viable approach for the synthesis of highly efficient perovskite-type photocatalysts for environmental remediation and energy production. The present chapter is organized into five sections: (1) a brief introduction to photocatalysis, (2) methods to tailor the photocatalytic properties of semiconductor photocatalysts, (3) a short overview of perovskite oxides as photocatalysts, (4) recent developments in enhancing the photocatalytic activity of perovskite materials, and (5) conclusions and insights.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Rao AN, Sivasankar B, Sadasivam V (2009) Kinetic studies on the photocatalytic degradation of Direct Yellow 12 in the presence of ZnO catalyst. J Mol Catal A Chem 306:77–81
Rauf MA, Ashraf SS (2009) Radiation induced degradation of dyes—an overview. J Hazard Mater 166:6–16
Akyol A, Bayramoglu M (2008) The degradation of an azo dye in a batch slurry photocatalytic reactor. Chem Eng Process 47:2150–2156
Ohtani B (2010) Photocatalysis A to Z—what we know and what we do not know in a scientific sense. J Photochem Photobiol C 11:157–178
Bahnemann D (2004) Photocatalytic water treatment: solar energy applications. Sol Energy 77:445–459
Zhang D, Li G, Li H et al (2013) The development of better photocatalysts through composition- and structure-engineering. Chem Asian J 8:26–40
Ch Samuel H S, Ta YW, Ch Juan J (2011) Recent developments of metal oxide semiconductors as photocatalysts in advanced oxidation processes (AOPs) for treatment of dye waste-water. J Chem Technol Biotechnol 86:1130–1158
Marye AF, Maria TD (1995) Heterogeneous photocatalysis. Chem Rev 83:341–357
Rauf MA, Ashraf SS (2009) Fundamental principles and application of heterogeneous photocatalytic degradation of dyes in solution. Chem Eng J 151:10–18
Krishnan R, Abegayl T, Csaba J (2015) Photocatalytic activity of inorganic semiconductor surfaces: myths, hype, and reality. J Phys Chem Lett 6:139–147
Fujishima A, Honda K (1972) Electrochemical photolysis of water at a semiconductor electrode. Nature 238:37–38
Chen X, Shen S, Guo L et al (2010) Semiconductor-based photocatalytic hydrogen generation. Chem Rev 110:6503–6570
Chen X, Mao SS (2007) Titanium dioxide nanomaterials: synthesis, properties, modifications, and applications. Chem Rev 107:2891–2959
Ji PF, Takeuchi M, Cuong TM et al (2010) Recent advances in visible light-responsive titanium oxide-based photocatalysts. Res Chem Intermed 36:327–347
Kato H, Kudo A (2002) Visible-light-response and photocatalytic activities of TiO2 and SrTiO3 photocatalysts co-doped with Antimony and Chromium. J Phys Chem B 106:5029–5034
Liu JW, Chen G, Li ZH et al (2006) Electronic structure and visible light photocatalysis water splitting property of chromium-doped SrTiO3. J Solid State Chem 179:3704–3708
Hwang DW, Kim HG, Lee JS et al (2005) Photocatalytic hydrogen production from water over M-Doped La2Ti2O7 (M = Cr, Fe) under visible light irradiation (λ > 420 nm). J Phys Chem B 109:2093–2102
Asahi R, Morikawa T, Ohwaki T et al (2001) Visible-light photocatalysis in nitrogen-doped titanium oxides. Science 293:269–271
Zaleska A, Grabowska E, Sobczak JW et al (2009) Photocatalytic activity of boron-modified TiO2 under visible light: The effect of boron content, calcination temperature and TiO2 matrix. Appl Catal B 89:469475
Paven-Thivet CL, Ishikawa A, Ziani A et al (2009) Photoelectrochemical properties of crystalline perovskite lanthanum titanium oxynitride films under lisible light. J Phys Chem C 113:6156–6162
Lu D, Hitoki G, Katou E et al (2004) Porous single-crystalline TaON and Ta3N5 particles. Chem Mater 16:1603–1605
Yashima M, Lee Y, Domen K (2007) crystal structure and electron density of tantalum oxynitride, a visible light responsive photocatalyst. Chem Mater 19:588–593
Li X, Kikugawa N, Ye J (2008) Nitrogen-doped lamellar niobic acid with visible light-responsive photocatalytic activity. Adv Mater 20:3816–3819
Matsumoto Y, Koinuma M, Iwanaga Y et al (2009) N-doping of oxide nanosheets. J Am Chem Soc 131:6644–6645
Luo M, Lu P, Yao W et al (2016) Shape and composition effects on photocatalytic hydrogen production for Pt–Pd Alloy co-catalysts. ACS Appl Mater Interfaces 8:20667–20674
Qin J, Zeng H (2017) Photocatalysts fabricated by depositing plasmonic Ag nanoparticles on carbon quantum dots/graphitic carbon nitride for broad spectrum photocatalytic hydrogen generation. Appl Catal B 209:161–173
Rather RA, Singh S, Pal B (2017) A C3N4 surface passivated highly photoactive Au–TiO2 tubular nanostructure for the efficient H2 production from water under sunlight irradiation. Appl Catal B 213:9–17
Jiang Y, Guo S, Hao R et al (2016) A hybridized heterojunction structure between TiO2 nanorods and exfoliated graphitic carbon-nitride sheets for hydrogen evolution under visible light. Cryst Eng Commun 18:6875–6880
Tay Q, Wang X, Zhao X et al (2016) Enhanced visible light hydrogen production via a multiple heterojunction structure with defect-engineered g–C3N4 and twophase anatase/brookite TiO2. J Catal 342:55–62
Yu X, Li W, Li Z et al (2017) Defect engineered Ta2O5 nanorod: One-pot synthesis, visible-light driven hydrogen generation and mechanism. Appl Catal B 217:48–56
Hirakawa H, Hashimoto M, Shiraishi Y et al (2017) Selective nitrate-to-ammonia transformation on surface defects of titanium dioxide photocatalysts. ACS Catal 7:3713–3720
Chen P, Qin M, Chen Z et al (2016) Solution combustion synthesis of nanosized WOx: characterization, mechanism and excellent photocatalytic properties. RSC Adv 6:83101–83109
Bao N, Shen L, Takata T et al (2008) Self-templated synthesis of nanoporous CdS nanostructures for highly efficient photocatalytic hydrogen production under visible light. Chem Mater 20:110–117
Yan H, Yang J, Ma G et al (2009) Visible-light-driven hydrogen production with extremely high quantum efficiency on Pt–PdS/CdS photocatalyst. J Catal 266:165–168
Borgarello E, Kiwi J, Pelizzetti E et al (1981) Sustained water cleavage by visible light. J Am Chem Soc 103:6324–6329
Chen F, Deng Z, Li X et al (2005) Visible light detoxification by 2,9,16,23-tetracarboxyl phthalocyanine copper modified amorphous titania. Chem Phys Lett 415:85–88
Nguyen TV, Wu JCS, Chiou CH (2008) Photoreduction of CO2 over Ruthenium dye-sensitized TiO2-based catalysts under concentrated natural sunlight. Catal Commun 9:2073–2076
Tyagi M, Tomar M, Gupta V (2014) Fabrication of an efficient GLAD-assisted p–NiO nanorod/n–ZnO thin film heterojunction UV photodiode. J Mater Chem C 2:2387–2393
Schuster F, Laumer B, Zamani RR et al (2014) p–GaN/n–ZnO heterojunction nanowires: optoelectronic properties and the role of interface polarity. ACS Nano 8:4376–4384
Luan P, Xie MZ, Fu XD et al (2015) Improved photoactivity of TiO2–Fe2O3 nanocomposites for visible-light water splitting after phosphate bridging and its mechanism. Phys Chem Chem Phys 17:5043–5050
Xie MZ, Fu XD, Jing LQ et al (2014) Long-lived, visible-light-excited charge carriers of TiO2/BiVO4 nanocomposites and their unexpected photoactivity for water splitting. Adv Energy Mater 4:1300995
Humayun M, Zada A, Li ZJ et al Enhanced visible-light activities of porous BiFeO3 by coupling with nanocrystalline TiO2 and mechanism. Appl Catal B 180:219–226
Yan W, Hou W, Wenguang T et al (2018) Quasi-polymeric construction of stable perovskite-type LaFeO3/g–C3N4 heterostructured photocatalyst for improved Z-scheme photocatalytic activity via solid p-n heterojunction interfacial effect. J Hazard Mater 347:412–422
Tanaka H, Misono M (2001) Advances in designing perovskite catalysts. Curr Opin Solid State Mater Sci 5:381–387
Cheong SW, Mostovoy M (2007) Multiferroics: a magnetic twist for ferroelectricity. Nat Mater 6:13–20
Pickett WE, Singh DJ (1996) Electronic structure and half-metallic transport in the La1−xCaxMnO3 system. Phys Rev B 53:1146
Kobayashi KI, Kimura T, Sawada H et al (1998) Room-temperature magnetoresistance in an oxide material with an ordered double-perovskite structure. Nature 395:677–680
Cava RJ, Batlogg B, Krajewski JJ et al (1988) Superconductivity near 30 K without copper: the Ba0.6K0.4BiO3 perovskite. Nature 332:814–816
Bhalla AS, Guo R, Roy R (2000) The perovskite structure–a review of its role in ceramic science and technology. Mater Res Innov 4:3–26
Huang YH, Dass RI, Xing ZL et al (2005) Double perovskites as anode materials for solid-oxide fuel cells. Science 312:254–257
Green MA, Ho-Baillie A, Snaith HJ (2014) The emergence of perovskite solar cells. Nat Photonics 8:506–514
Wiegel M, Emond MHJ, Stobbe ER et al (1994) Luminescence of alkali tantalates and niobates. J Phys Chem Solids 55:773–778
Kudo A, Kato H, Nakagawa S (2000) Water splitting into H2 and O2 on new Sr2M2O7 (M = Nb and Ta) photocatalysts with layered perovskite structure: factors affecting the photocatalytic activity. J Phys Chem B 104:571–575
Ewelina G (2016) Selected perovskite oxides: characterization, preparation and photocatalytic properties—a review. Appl Catal B 186:97–126
Guan Z, Gang L, Lianzhou W et al (2016) Inorganic perovskite photocatalysts for solar energy utilization. Chem Soc Rev 45:5951–5984
Sheng Z, Piyush K, Ujwal Kumar T et al (2018) A Review on photocatalytic CO2 reduction using perovskite oxide nanomaterials. Nanotechnology 29:052001
Pushkar K, Zhong Ch (2014) Review on visible light active perovskite-based photocatalysts. Molecules 19:19995–20022
Saumyaprava A, Satyabadi M, Prakash ChS et al (2015) Glimpses of the modification of perovskite with graphene-analogous materials in photocatalytic applications. Inorg Chem Front 2:807–823
Jinwen S, Liejin G (2012) ABO3-based photocatalysts for water splitting. Prog Nat Sci Mater Int 22:592–615
Wei W, Moses OT, Zongping S (2015) Research progress of perovskite materials in photocatalysis- and photovoltaics-related energy conversion and environmental treatment. Chem Soc Rev 44:5371–5408
Zhu J, Li H, Zhong L et al (2014) Perovskite oxides: preparation, characterizations, and applications in heterogeneous catalysis. ACS Catal 4:2917–2940
Shi R, Waterhouse GIN, Tierui Z (2017) Recent progress in photocatalytic CO2 reduction over perovskite oxides. Sol. RRL 1:1700126–1700143
Koferstein R, Jager L, Ebbinghaus SG (2013) Magnetic and optical investigations on LaFeO3 powders with different particle sizes and corresponding ceramics. Solid State Ionics 249–250:1–5
Arima T, Tokura Y, Torrence JB (1993) Variation of optical gaps in perovskite-type 3d transition-metal oxides. Phys Rev B 48:17006–17009
Xu JJ, Wang ZL, Xu D et al (2014) 3D ordered macroporous LaFeO3 as efficient electrocatalyst for Li–O2 batteries with enhanced rate capability and cyclic performance. Energy Environ Sci 7:2213–2219
Jauhar S, Singhal S (2014) Chromium and copper substituted lanthanum nanoferrites: their synthesis, characterization and application studies. J Mol Struct 1075:534–541
Sivakumar M, Gedanken A, Zhong W et al (2004) Sonochemical synthesis of nanocrystalline LaFeO3. J Mater Chem 14:764–769
Popa M, Moreno JMC (2011) Lanthanum ferrite ferromagnetic nanocrystallites by a polymeric precursor route. J Alloy Compd 509:4108–4116
Li S, Wang X (2015) Synthesis of different morphologies lanthanum ferrite (LaFeO3) fibers via electrospinning. Optik 126:408–410
Thirumalairajan S, Girija K, Hebalkar NY et al (2013) Shape evolution of perovskite LaFeO3 nanostructures: a systematic investigation of growth mechanism, properties and morphology dependent photocatalytic activities. RSC Adv 3:7549–7561
Thirumalairajan S, Girija K, Ganesh I et al (2012) Controlled synthesis of perovskite LaFeO3 microsphere composed of nanoparticles via self-assembly process and their associated photocatalytic activity. Chem Eng J 209:420–428
Li FT, Liu Y, Liu RH et al (2010) Preparation of Ca-doped LaFeO3 nanopowders in a reverse microemulsion and their visible light photocatalytic activity. Mater Lett 64:223–225
Dong S, Xu K, Tian G (2009) Photocatalytic activities of LaFe1−xZnxO3 nanocrystals prepared by sol–gel auto-combustion method. J Mater Sci 44:2548–2552
Hou L, Sun GF, Liu K et al (2006) Preparation, characterization and investigation of catalytic activity of Li-doped LaFeO3 nanoparticles. J Sol–Gel Sci Technol 40:9–14
Wei ZX, Wang Y, Liu JP et al (2012) Synthesis, magnetization and photocatalytic activity of LaFeO3 and LaFe0.5Mn0.5−xO3−δ. Mater Chem Phys 136:755–761
Natali Sora I, Caronna T, Fontana F et al (2012) Crystal structures and magnetic properties of strontium and copper doped lanthanum ferrites. J Solid State Chem 191:33–39
Parrino F, García-Lopez E, Marcìa G et al (2016) Cu-substituted lanthanum ferrite perovskites: preparation, characterization and photocatalytic activity in gas-solid regime under simulated solar light irradiation. J Alloy Compd 682:686–694
Jauhar S, Dhiman M, Bansal S et al (2015) Mn3+ ion in perovskite lattice: a potential Fenton’s reagent exhibiting remarkably enhanced degradation of cationic and anionic dyes. J Sol Gel Sci Technol 75:124–133
Dhiman M, Tripathi M, Singhal S et al (2017), Structural, optical and photocatalytic properties of different metal ions (Cr3+, Co2+, Ni2+, Cu2+ and Zn2+) substituted quaternary perovskites. Mater Chem Phys 202:40–49
Xicai H, Yongcai Z (2017) Low temperature gel-combustion synthesis of porous nanostructure LaFeO3 with enhanced visible-light photocatalytic activity in reduction of Cr(VI). Mater Lett 197:120–122
Giuseppina I, Vincenzo V, Diana S et al (2016) Photocatalytic conversion of glucose to H2 over LaFeO3 perovskite nanoparticles. Chem Eng Trans 47:283–288
Ren X, Yang HT, Gen S et al (2016) Controlled growth of LaFeO3 nanoparticles on reduced graphene oxide for highly efficient photocatalysis. Nanoscale 8:752–756
Muhammad H, Ning S, Fazal R et al (2018) Synthesis of ZnO/Bi-doped porous LaFeO3 nanocomposites as highly efficient nano-photocatalysts dependent on the enhanced utilization of visible-light-excited electrons. Appl Catal B 231:23–33
Ibrahim MN, Shaolong W, Liang L et al (2018) Facile preparation of n-Type LaFeO3 perovskite film for efficient photoelectrochemical water splitting. ChemistrySelect 3:968–972
Hsish TH, Jhong FH, Roy DT et al (2012) Electrical properties of (La0.9Ca0.1)(Co1−xNix)O3−δ cathode materials for SOFCs. Ceram Int 38:1785–1791
Wang Y, Ren J, Wang Y et al (2008) Nanocasted synthesis of mesoporous LaCoO3 perovskite with extremely high surface area and excellent activity in methane combustion. J Phys Chem C 112:15293–15298
Feng L, Okonkwo CA, Qiong X et al (2016) PdO/LaCoO3 heterojunction photocatalysts for highly hydrogen production from formaldehyde aqueous solution under visible light. Int J Hydrogen Energy 41:6115–6122
Minghui W, Mingping L, Minxue G et al (2017) Sugarcane bagasse hydrolysis by metal ions mediated synthesis of perovskite LaCoO3 and the photocatalytic performance for hydrogen from formaldehyde solution under visible light. ACS Sustainable Chem Eng 5:11558–11565
Malleshappa J, Nagabhushana H, Sharma SC et al (2015) Leucas aspera mediated multifunctional CeO2 nanoparticles: structural, photoluminescent, photocatalytic and antibacterial properties. Spectrochim Acta Part A 149:452–462
Liqing W, Qi P, Qianqian S et al (2015) Novel microbial synthesis of Cu doped LaCoO3 photocatalyst and its high efficient hydrogen production from formaldehyde solution under visible light irradiation. Fuel 140:267–274
Jayapandi S, Lakshmi D, Premkumar S et al (2018) Augmented photocatalytic and electrochemical activities of Ag tailored LaCoO3 perovskite semiconductor. Mater Lett 218:205–208
Shaterian M, Enhessari M, Rabbani D et al (2014) Synthesis, characterization and photocatalytic activity of LaMnO3 nanoparticles. Appl Surf Sci 318:213–217
Jie H, Jiahua M, Lina W et al (2014) Preparation, characterization and photocatalytic activity of co-doped LaMnO3/graphene composites. Powder Technol 54:556–562
Mi Y, Zeng S, Li L et al (2012) Solvent directed fabrication of Bi2WO6 nanostructures with different morphologies: Synthesis and their shape-dependent photocatalytic properties. Mater Res Bull 47:2623–2630
Rajesh Kumar S, Abinaya CV, Amirthapandian S et al (2017) Enhanced visible light photocatalytic activity of porous LaMnO3 sub-micron particles in the degradation of rose bengal. Mater Res Bull 93:270–281
Peisong T, Longlong Y, Jiayuan M et al (2017) Preparation of nanocrystalline YbFeO3 by sol–gel method and its visible-light photocatalytic activities. Ferroelectrics 521:71–76
Peisong T, Chen H, Lv Chunyan et al (2017) Microwave synthesis of nanoparticulate EuFeO3 and its visible light photocatalytic activity. Integr Ferroelectr 181:49–54
Yupeng Y, Xueliang Z, Lifei L et al (2008) Synthesis and photocatalytic characterization of a new photocatalyst BaZrO3. Int J Hydrogen Energy 33:5941–5946
Yupeng Y, Zongyan Z, Jing Z et al (2010) Polymerizable complex synthesis of BaZr1−xSnxO3 photocatalysts: Role of Sn4+ in the band structure and their photocatalytic water splitting activities. J Mater Chem 20:6772–6779
Yupeng Y, Lv J, Jiang XJ et al (2007) Large impact of strontium substitution on photocatalytic water splitting activity of BaSnO3. Appl Phys Lett 91:094107
Borse PH, Joshi UA, Ji SM et al (2007) Band gap tuning of lead-substituted BaSnO3 for visible light photocatalysis. Appl Phys Lett 90:034103
Borja-Urby R, Díaz-Torres LA, Salas P et al (2011) Structural study, photoluminescence, and photocatalytic activity of semiconducting BaZrO3: Bi nanocrystals. J Mater Sci Eng B 176:1382–1387
Ziyauddin K, Mohammad Q (2012) Tantalum doped BaZrO3 for efficient photocatalytic hydrogen generation by water splitting. Catal Commun 28:82–85
Kazuhiko M, Kazunari D (2012) Water oxidation using a particulate BaZrO3–BaTaO2N solid-solution photocatalyst that operates under a wide range of visible light. Angew Chem Int Ed 51:9865–9869
Magdalena M, Beata B, Paweł M et al (2017) Preparation and photocatalytic properties of BaZrO3 and SrZrO3 modified with Cu2O/Bi2O3 quantum dots. Solid State Sci 74:13–23
Alammar T, Hamm I, Wark M, Mudring A-V et al (2015) Low-temperature route to metal titanate perovskite nanoparticles for photocatalytic applications. Appl Catal B 178:20–28
Zhu S, Salvador PA, Rohrer GS et al (2017) Controlling the termination and photochemical reactivity of the SrTiO3 (110) surface. Phys Chem Chem Phys 19:7910–7918
da Silva LF, Lopes OF, de Mendonca VR, Carvalho KTG, Longo E, Ribeiro C, Mastelaro VR et al (2016) An understanding of the photocatalytic properties and pollutant degradation mechanism of SrTiO3 nanoparticles. Photochem Photobiol 9:371–378
Xian T, Di L, Sun X, Ma J, Zhou Y, Wei X et al (2018) Photocatalytic degradation of dyes over Au decorated SrTiO3 nanoparticles under simulated sunlight and visible light irradiation. J Ceram Soc Jpn 126:354–359
Liu X, Jiang J, Jia Y, Qiu J, Xia T, Zhang Y, Li Y, Chen X et al (2017) Insight into synergistically enhanced adsorption and visible light photocatalytic performance of Z-scheme heterojunction of SrTiO3(La, Cr)-decorated WO3 nanosheets. Appl Surf Sci 412:279–289
Kiss B, Manning TD, Hesp D et al (2017) Nano-structured rhodium doped SrTiO3-Visible light activated photocatalyst for water decontamination. Appl Catal B 206:547–555
Devi LG, Anitha BG (2018) Exploration of vectorial charge transfer mechanism in TiO2/SrTiO3 composite under UV light illumination for the degradation of 4-Nitrophenol: a comparative study with TiO2 and SrTiO3. Surf Interfaces 11:48–56
Challagulla S, Nagarjuna R, Roy S et al (2017) Scalable free-radical polymerization based sol–gel synthesis of SrTiO3 and its photocatalytic activity. ChemistrySelect 2:4836–4842
Goto Y, Hisatomi T, Wang Q et al (2018) A particulate photocatalyst water-splitting panel for large-scale solar hydrogen generation. Joule 2:509–520
Saadetnejad D, Yıldırım R (2018) Photocatalytic hydrogen production by water splitting over Au/Al–SrTiO3. Int J Hydrogen Energy 43:1116–1122
Han K, Lin YC, Yang CM et al (2017) Promoting photocatalytic overall water splitting by controlled magnesium incorporation in SrTiO3 photocatalysts. Chem Sus Chem 10:4510–4516
Kou J, Gao J, Li Z et al (2015) Construction of visible-light-responsive SrTiO3 with enhanced CO2 adsorption ability: highly efficient photocatalysts for artifical photosynthesis. Catal Lett 145:640–646
Luo C, Zhao J, Li Y et al (2018) Photocatalytic CO2 reduction over SrTiO3: correlation between surface structure and activity. Appl Surf Sci 447:627–635
Li D, Ouyang S, Xu H et al (2016) Synergistic effect of Au and Rh on SrTiO3 in significantly promoting visible-light-driven syngas production from CO2 and H2O. Chem Commun 52:5989–5992
Shoji S, Yin G, Nishikawa M et al (2016) Photocatalytic reduction of CO2 by CuxO nanocluster loaded SrTiO3 nanorod thin film. Chem Phys Lett 658:309–314
Pan JH, Cai ZC, Yu Y, Zhao XS (2011) Controllable synthesis of mesoporous F–TiO2 spheres for effective photocatalysis. J Mater Chem 21:11430–11438
Yang D, Sun YY, Tong ZW, Nan YH, Jiang ZY (2016) Fabrication of bimodal-pore SrTiO3 microspheres with excellent photocatalytic performance for Cr(VI) reduction under simulated sunlight. J Hazard Mater 312:45–54
Dong Y, Xiaoyan Z, Yuanyuan S, Zhenwei T, Zhongyi J (2018) Fabrication of three-dimensional porous La-doped SrTiO3 microspheres with enhanced visible light catalytic activity for Cr(VI) reduction. Front Chem Sci Eng 12:440–449
Cheng Z, Lin J (2010) Layered organic–inorganic hybrid perovskites: structure, optical properties, film preparation, patterning and templating engineering. Cryst Eng Commun 12:2646–2662
Yan Y, Yang H, Zhao X et al (2018) Enhanced photocatalytic activity of surface disorder-engineered CaTiO3. Mater Res Bull 105:286–290
Kumar A, Schuerings C, Kumar S et al (2018) Perovskite-structured CaTiO3 coupled with g–C3N4 as a heterojunction photocatalyst for organic pollutant degradation. Beilstein J Nanotechnol 9:671–685
Yan Y, Yang H, Zhao X et al (2018) A Hydrothermal route to the synthesis of CaTiO3 nanocuboids using P25 as the titanium source. J Electron Mater 47:3045–3050
Han C, Liu J, Yang W et al (2017) Photocatalytic activity of CaTiO3 synthesized by solid state, sol–gel and hydrothermal methods. J Sol–Gel Sci Technol 81:806–813
Zhang H, Chen G, He X et al (2012) Electronic structure and photocatalytic properties of Ag–La codoped CaTiO3. J Alloys Compd 516:91–95
Im Y, Park S-M, Kang M (2017) Effect of Ca/Ti Ratio on the core-shell structured CaTiO3@basalt fiber for effective photoreduction of carbon dioxide. Bull Korean Chem Soc 38:397–400
Yoshida H, Zhang L, Sato M et al (2015) Calcium titanate photocatalyst prepared by a flux method for reduction of carbon dioxide with water. Catal Today 251:132–139
Selvarajan S, Malathy P, Suganthi A et al (2017) Fabrication of mesoporous BaTiO3/SnO2 nanorods with highly enhanced photocatalytic degradation of organic pollutants. J Ind Eng Chem 53:201–212
Nageri M, Kumar V (2018) Manganese-doped BaTiO3 nanotube arrays for enhanced visible light photocatalytic applications. Mater Chem Phys 213:400–405
Thamima M, Andou Y, Karuppuchamy S (2017) Microwave assisted synthesis of perovskite structured BaTiO3 nanospheres via peroxo route for photocatalytic applications. Ceram Int 43:556–563
Maeda K (2014) Rhodium-doped barium titanate perovskite as a stable p-type semiconductor photocatalyst for hydrogen evolution under visible light. ACS Appl Mater Interfaces 6:2167–2173
Yan SC, Wang JQ, Li ZS et al (2009) Photocatalytic activities for water splitting of La-doped NaTaO3 fabricated by microwave synthesis. Solid State Ionics 180:1539–1542
Wang S, Xu X, Luo H et al (2016) Enhanced organic dye removal of the W and N co-doped NaTaO3 under visible light irradiation. J Alloys Compd 681:225–232
Lan NT, Phan LG, Hoang LH et al (2016) Hydrothermal synthesis, structure and photocatalytic properties of La/Bi co-doped NaTaO3. Mater Trans 57:1–4
Li FF, Liu DR, Gao GM et al (2015) Improved visible-light photocatalytic activity of NaTaO3 with perovskite-like structure via sulfur anion doping. Appl Catal B 166–167:104–111
Kato H, Kudo A (1999) Highly efficient decomposition of pure water into H2 and O2 over NaTaO3 photocatalysts. Catal Lett 58:153–155
Jana P, Montero CM, Pizarro P et al (2014) Photocatalytic hydrogen production in the water/methanol system using Pt/RE: NaTaO3 (RE = Y, La, Ce, Yb) catalysts. Int J Hydrogen Energy 39:5283–5290
Lopez-Juarez R, Gonzalez F, Cipagauta S et al (2016) Solid state synthesis of La-doped NaTaO3 under time-reduced conditions and its photocatalytic properties. Ceram Silikáty 60:278–284
Liu X, Lv J, Wang S et al (2015) A novel contractive effect of KTaO3 nanocrystals via La3+ doping and an enhanced photocatalytic performance. J Alloys Compd 622:894–901
Krukowska A, Trykowski G, Winiarski MJ et al (2018) Mono- and bimetallic nanoparticles decorated KTaO3 photocatalysts with improved Vis and UV–Vis light activity. Appl Surf Sci 441:993–1011
Bajorowicz B, Reszczyńska J, Lisowski W et al (2015) Perovskite-type KTaO3-reduced graphene oxide hybrid with improved visible light photocatalytic activity. RSC Adv 5:91315–91325
Chen Z, Xing P, Chen P et al (2018) Synthesis of carbon doped KTaO3 and its enhanced performance in photocatalytic H2 generation. Catal Commun 109:6–9
Xiang T, Xin F, Zhao C et al (2018) Fabrication of nano copper oxide evenly patched on cubic sodium tantalate for oriented photocatalytic reduction of carbon dioxide. J Colloid Interface Sci 518:34–40
Nakanishi H, Iizuka K, Takayama T et al (2017) Highly active NaTaO3-based photocatalysts for CO2 reduction to form CO using water as the electron donor. Chem Sus Chem 10:112–118
Shao X, Yin X, Wang J (2018) Nanoheterostructures of potassium tantalate and nickel oxide for photocatalytic reduction of carbon dioxide to methanol in isopropanol. J Colloid Interface Sci 512:466–473
Li K, Handoko AD, Khraisheh M et al (2014) Photocatalytic reduction of CO2 and protons using water as an electron donor over potassium tantalate nanoflakes. Nanoscale 6:9767–9773
Fresno F, Jana P, Renones P et al (2017) CO2 reduction over NaNbO3 and NaTaO3 perovskite photocatalysts. Photochem Photobiol Sci 16:17–23
Wu W, Liang S, Chen Y et al (2013) Mechanism and improvement of the visible light photocatalysis of organic pollutants over microcrystalline AgNbO3 prepared by a sol–gel method. Mater Res Bull 48:1618–1626
Sun M, Yan Q, Shao Y et al (2017) Facile fabrication of BiOI decorated NaNbO3 cubes: A p-n junction photocatalyst with improved visible-light activity. Appl Surf Sci 416:288–295
Chen W, Hu Y, Ba M (2018) Surface interaction between cubic phase NaNbO3 nanoflowers and Ru nanoparticles for enhancing visible-light driven photosensitized photocatalysis. Appl Surf Sci 435:483–493
Wang L, Gu H, He J et al (2017) Scale synthesized cubic NaNbO3 nanoparticles with recoverable adsorption and photodegradation for prompt removal of methylene blue. J Alloys Compd 695:599–606
Liu Q, Chai Y, Zhang L et al (2017) Highly efficient Pt/NaNbO3 nanowire photocatalyst: its morphology effect and application in water purification and H2 production. Appl Catal B 205:505–513
Liu Q, Zhang L, Chai Y et al (2017) Facile fabrication and mechanism of single-crystal sodium niobate photocatalyst: insight into the structure features influence on photocatalytic performance for H2 evolution. J Phys Chem C 121:25898–25907
Li P, Xu H, Liu L et al (2014) Constructing cubic–orthorhombic surface-phase junctions of NaNbO3 towards significant enhancement of CO2 photoreduction. J Mater Chem A 2:5606–5609
Shi H, Chen G, Zhang C et al (2014) Polymeric g–C3N4 coupled with NaNbO3 nanowires toward enhanced photocatalytic reduction of CO2 into renewable fuel. ACS Catal 4:3637–3643
Shi H, Zhang C, Zhou C et al (2015) Conversion of CO2 into renewable fuel over Pt–g–C3N4/KNbO3 composite photocatalyst. RSC Adv 5:93615–93622
Raja S, Babu RR, Ramamurthi K et al (2018) Magnetic and photocatalytic properties of bismuth doped KNbO3 microrods. Mater Res Bull 105:349–359
Zhang T, Zhao K, Yu J et al (2013) Photocatalytic water splitting for hydrogen generation on cubic, orthorhombic, and tetragonal KNbO3 microcubes. Nanoscale 5:8375–8383
Wang R, Zhu Y, Qiu Y et al (2013) Synthesis of nitrogen-doped KNbO3 nanocubes with high photocatalytic activity for water splitting and degradation of organic pollutants under visible light. Chem Eng J 226:123–130
Hong Z, Li X, Kang SZ et al (2014) Enhanced photocatalytic activity and stability of the reduced graphene oxide loaded potassium niobate microspheres for hydrogen production from water reduction. Int J Hydrogen Energy 39:12515–12523
Acknowledgements
Authors would like to acknowledge CSIR, New Delhi under the CSIR-scheme (No. 01(2857)/16/EMR-II) for their financial support. PV thanks University Grants Commission (UGC)-Dr. D. S. Kothari Postdoctoral Fellowship (DSKPDF) Scheme, New Delhi for his postdoctoral research fellowship. MV thanks UGC New Delhi for the award of BSR fellowship.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Gundeboina, R., Perala, V., Muga, V. (2020). Perovskite Material-Based Photocatalysts. In: Arul, N., Nithya, V. (eds) Revolution of Perovskite. Materials Horizons: From Nature to Nanomaterials. Springer, Singapore. https://doi.org/10.1007/978-981-15-1267-4_9
Download citation
DOI: https://doi.org/10.1007/978-981-15-1267-4_9
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-1266-7
Online ISBN: 978-981-15-1267-4
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)