Abstract
A heat pipe substrate module diffused heat by phase change was designed, and transient thermal properties of the vapor chamber were analyzed. The time of the vapor chamber to get steady-state mainly depends on the heat transfer coefficient. As the heat transfer coefficient increases, the time to reach steady state is shorter. Reducing the temperature drop of the vapor chamber core portion can effectively improve thermal performance for the vapor chamber. The transient temperature rise of vapor chamber tube core is smaller than that of the pure copper substrate module and the air heat pipe substrate module with fixed thermal resistance, it is beneficial to overcome the power “swell” and improve thermal shock resistance of the power device. The thermal resistance of the heat sink accounts for more than 70% of the thermal resistance of the entire heat dissipation module. The transient thermal performance of the vapor chamber and the power module integrated packaged can ensure thermal diffusion efficient and smooth operation.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Zhu, K., et al.: Experimental study of energy saving performances in chip cooling by using heat sink with embedded heat pipe. Energy Procedia 105, 5160–5165 (2017)
Jaroslaw, L., et al.: Measurements and simulations of transient characteristics of heat pipes. Microelectron. Reliab. 46, 109–115 (2006)
Kim, K.S., et al.: Heat pipe cooling technology for desktop PC CPU. Appl. Therm. Eng. 23(9), 1137–1144 (2003)
Guo, L.: Development of heat dissipation in electronics components. Cryog. Supercond. 42(2), 62–66 (2014)
Zhang, M., Liu, Z.L., Wang, C.: The integrated design of heat pipe spreader and heat sink. J. Eng. Thermophys. 31(5), 853–856 (2010)
Zhang, L.H., et al.: Thermal characteristic of a novel flat plate heat pipe for hybrid integrated power electronic module. Acat Electronica Sin. 37(8), 1848–1853 (2009)
Chen, T.S., Chen, K.H., Wang, C.: A simplified transient three-dimensional model for estimating the thermal performance of the vapor chambers. Appl. Therm. Eng. 26, 2087–2094 (2006)
Rahman, M.L., et al.: Effect of fin and insert on the performance characteristics of close loop pulsating heat pipe (CLPHP). Procardia Eng. 05, 129–136 (2015)
Tran, T., et al.: Experimental investigation on the feasibility of heat pipe cooling. Appl. Therm. Eng. 63(2), 551–558 (2014)
Take, K., Webb, L.R.: Thermal performance of integrated plate heat pipe with a heat spreader. J. Electron. Packag. 123 (2001)
Sauciuc, I., Chrysler, G., Mahajan, R., Prasher, R.: Spreading in the heat sink base: phase change systems or solid metals. IEEE Trans. Compon. Packag. Technol. 25 (2008)
Wei, J., Cha, A., Copeland, D.: Measurement of vapor chamber performance. In: IEEE, Semi-Therm Symposium (2013)
Ivanova, M., Avenas, Y., et al.: Heat pipe integrated in direct bonded copper technology for cooling of power electronics packaging. IEEE Trans. Power Electron. 21(6) (2016)
Gao, M., Cao, Y.: Flat and U-shaped heat spreaders for high-power electronics. Heat Transfer Eng. 24(3), 57–65 (2013)
Acknowledgements
The project is supported by the National Natural Science Foundation of China (Grant No. 51504188).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Chen, Y., Zhang, Y., Wang, P., Guo, Y. (2020). Analysis on Transient Thermal Behaviors of the Novel Vapor Chamber. In: Wang, Z., Zhu, Y., Wang, F., Wang, P., Shen, C., Liu, J. (eds) Proceedings of the 11th International Symposium on Heating, Ventilation and Air Conditioning (ISHVAC 2019). ISHVAC 2019. Environmental Science and Engineering(). Springer, Singapore. https://doi.org/10.1007/978-981-13-9524-6_38
Download citation
DOI: https://doi.org/10.1007/978-981-13-9524-6_38
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-9523-9
Online ISBN: 978-981-13-9524-6
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)