Abstract
Welding process parameters and the interaction between them show a major effect on the clad bead shape. This work focuses on an experimental study of clad bead shapes and analyzes the interaction between the welding process parameters by depositing ERNiCrMo-10 cladding on AISI 4140 steel by gas metal arc welding (GMAW) process. The experiment is performed with three factors and three levels, and mathematical models are developed using the response surface methodology (RSM), and the adequacy is checked using ANOVA. The model developed using RSM is analyzed using interaction surface plots.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
ASM Handbook Welding, Brazing, and Soldering (1993) vol 6. ASM, USA
Kannan T, Murugan N (2006) Sensitivity analysis of flux cored arc cladding parameters using response surface methodology. Int J Manuf Sci Prod 7:3–4
Cochran WG, Cox GM (1987) Experimental designs. Wiley, New York
Joseph GB, NarendraKumar G, Mageshwaran G, Jeevahan J, Sriram V, Durai Raj RB (2018) Optimisation of process parameters for electroless nickel plating on SS316L for refrigeration systems. Int J Ambient Energy. https://doi.org/10.1080/01430750.2018.1437564
Davies OL (1978) The design and analysis of industrial experi- ments. Longmen, New York
Dhinakaran V, Shanmugam NS, Sankaranarayanasamy K (2017) Some studies on temperature field during plasma arc welding of thin titanium alloy sheets using parabolic Gaussian heat source model. Proc Inst Mech Eng Part C: J Mech Eng Sci 231(4):695–711
Dhinakaran V, Shanmugam NS, Sankaranarayanasamy K (2017) Experimental investigation and numerical simulation of weld bead geometry and temperature distribution during plasma arc welding of thin Ti-6Al-4V sheets. J Strain Anal Eng Design 52(1):30–44
Ghosh PK, Gupta PC, Goyal VK et al (1998) Stainless steel cladding of structural steel plate using the pulsed current GMAW process. Weld J 77(7):307-s–314-s
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Joseph, G.B., Valarmathi, T.N., Mageshwaran, G., Jeevahan, J., Sriram, V., Durai Raj, R.B. (2019). Studies on the Influence of Welding Parameters in Cladding of ERNiCrMo-10 on AISI 4140 Using GMAW Process. In: Hiremath, S., Shanmugam, N., Bapu, B. (eds) Advances in Manufacturing Technology. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-13-6374-0_67
Download citation
DOI: https://doi.org/10.1007/978-981-13-6374-0_67
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-6373-3
Online ISBN: 978-981-13-6374-0
eBook Packages: EngineeringEngineering (R0)