Abstract
In many applications, only a reduced percentage (industrial processes 30â40%, internal combustion engines ICE 25%, photovoltaic systems PV 15%, etc.) of the primary energy is converted into useful energy. Increased energy efficiency can be realized through better performance of the involved devices, but also through the recovery of the energy losses. Partial recovery of the losses (mainly heat) may be done using mechanical means (turbines, Stirling generators, solar collectors), but still, the heat wasted to environment remains important. In this context, the thermoelectric generators (TEG) based on (novel) thermoelectric materials may offer a good alternative for heat recovery, since TEGs are static devices that in principle do not require maintenance and may work even in harsh environments, like, e.g., space, extreme cold, etc. Besides, TEGs can be used together with PV systems in hybrid installations to harvest more energy from the solar radiation. Up to date, expensive (due to complex manufacturing and scarcity of used materials) and not so efficient (due to low figure of merit ZTâ<â1 and inefficient MPPT techniques) TEGs have not been applied at large scale for low-grade heat recovery and for (solar) energy harvesting in smart buildings. However, in recent years, many research and development activities around TE-materials are going on worldwide and there is more pressure to increase the energy efficiency of many heat wasting processes and of (solar) energy harvesting in smart buildings. Potential of existent, commercially available TEGs and of emerging TEGs is investigated taking into account their properties, their past and emerging usage related to industrial and residential waste heat recovery and (solar) energy harvesting.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Al-Madhhachi H, Min G (2017) Effective use of thermal energy at both hot and cold side of thermoelectric module for developing efficient thermoelectric water distillation system. Energy Convers Manag 133:14â19
Angeline AA, Jayakumar J, Asirvatham LG, Marshal JJ, Wongwises S (2017) Power generation enhancement with hybrid thermoelectric generator using biomass waste heat energy. Exp Therm Fluid Sci 85:1â12
Assadi MK, Bakhoda S, Saidur R, Hanaei H (2018) Recent progress in perovskite solar cells. Renew Sustain Energy Rev 81:2812â2822
Baranowski LL, Snyder GJ, Toberer ES, Baranowski LL, Snyder GJ, Toberer ES (2013) Effective thermal conductivity in thermoelectric materials. J Appl Phys 204904:1â11
Benday NS, Dryden DM, Kornbluth K, Stroeve P (2017) A temperature-variant method for performance modeling and economic analysis of thermoelectric generators: linking material properties to real-world conditions. Appl Energy 190:764â771
Bharti M, Singh A, Samanta S, Aswal DK (2018) Conductive polymers for thermoelectric power generation. Prog Mater Sci 93:270â310
Bine Information Service (2016) Thermoelectrics: power from waste heat, Themeninfo I, Jan 2017
Borcuch M, MusiaĹ M, GumuĹa S, Sztekler K, Wojciechowski K (2017) Analysis of the fins geometry of a hot-side heat exchanger on the performance parameters of a thermoelectric generation system. Appl Therm Eng 127:1355â1363
Champier D (2017) Thermoelectric generators: a review of applications. Energy Convers Manag 140:167â181
Chandel SS, Agarwal T (2017) Review of cooling techniques using phase change materials for enhancing efficiency of photovoltaic power systems. Renew Sustain Energy Rev 73:1342â1351
Chen WH, Wu PH, Lin YL (2018) Performance optimization of thermoelectric generators designed by multi-objective genetic algorithm. Appl Energy 209:211â223
Cheng F et al (2017a) A thermoelectric generator for scavenging gas-heat: from module optimization to prototype test. Energy 121:545â560
Cheng K, Qin J, Jiang Y, Lv C, Zhang S, Bao W (2017b) Performance assessment of multi-stage thermoelectric generators on hypersonic vehicles at a large temperature difference. Appl Therm Eng 141:456â466
Cheng K, Feng Y, Lv C, Zhang S, Qin J, Bao W (2017c) Performance evaluation of waste heat recovery systems based on semiconductor thermoelectric generators for hypersonic vehicles. Energies 10(4)
Cheng K, Zhang D, Qin J, Zhang S, Bao W (2018) Performance evaluation and comparison of electricity generation systems based on single- and two-stage thermoelectric generator for hypersonic vehicles. Acta Astronaut 151:15â21
Contento G, Lorenzi B, Rizzo A, Narducci D (2017) Efficiency enhancement of a-Si and CZTS solar cells using different thermoelectric hybridization strategies. Energy 131:230â238
Cottrill AL et al (2018) Ultra-high thermal effusivity materials for resonant ambient thermal energy harvesting. Nat Commun 9(1):1â11
Cowen LM, Atoyo J, Carnie MJ, Baran D, Schroeder BC (2017) Reviewâorganic materials for thermoelectric energy generation. ECS J Solid State Sci Technol 6(3):N3080âN3088
Cui T, Xuan Y, Li Q (2016) Design of a novel concentrating photovoltaic-thermoelectric system incorporated with phase change materials. Energy Convers Manag 112:49â60
Cui T, Xuan Y, Yin E, Li Q, Li D (2017) Experimental investigation on potential of a concentrated photovoltaic-thermoelectric system with phase change materials. Energy 122:94â102
Demir ME, Dincer I (2017) Performance assessment of a thermoelectric generator applied to exhaust waste heat recovery. Appl Therm Eng 120:694â707
Deng YD, Hu T, Su CQ, Yuan XH (2017) Fuel economy improvement by utilizing thermoelectric generator in heavy-duty vehicle. J Electron Mater 46(5):3227â3234
Di Paolo Emilio M (2017) Microelectronic circuit design for energy harvesting systems
El kamouny K et al (2018) Thermoelectric cooling micro-inverter for PV application. Sol Energy Mater Sol Cells 180:311â321
Ferreira-Teixeira S, Pereira AM (2018) Geometrical optimization of a thermoelectric device: numerical simulations. Energy Convers Manag 169:217â227
Fu Y, Zhang X, Liu H, Tian J, Zhang J (2018) Thermoelectric properties of Ag-doped compound: Mg3-xAgxSb2. J Mater 4(1):75â79
Gaurav K, Pandey SK (2016) Efficiency calculation of thermoelectric generator using temperature dependent materialâs properties, May 2016
Gayner C, Kar KK (2016) Recent advances in thermoelectric materials. Prog Mater Sci 83:330â382
Gong CL, Gou JJ, Hu JX, Gao F (2018) A novel TE-material based thermal protection structure and its performance evaluation for hypersonic flight vehicles. Aerosp Sci Technol 77:458â470
Guo L, Lu Q (2017) Potentials of piezoelectric and thermoelectric technologies for harvesting energy from pavements. Renew Sustain Energy Rev 72:761â773
Hajji M et al (2017) Photovoltaic and thermoelectric indirect coupling for maximum solar energy exploitation. Energy Convers Manag 136:184â191
Hannan MA, Hoque MM, Mohamed A, Ayob A (2017) Review of energy storage systems for electric vehicle applications: issues and challenges. Renew Sustain Energy Rev 69:771â789
Haras M et al (2015) Thermoelectric energy conversion: how good can silicon be? Mater Lett 157:193â196
Hernandez H, Kofuji ST, Van Noije W (2013) Fully integrated boost converter for thermoelectric energy harvesting. In: 2013 IEEE 4th Latin American symposium on circuits and systems, pp 1â3
HĂśgblom O, Andersson R (2016) A simulation framework for prediction of thermoelectric generator system performance. Appl Energy 180:472â482
Huang K, Li B, Yan Y, Li Y, Twaha S, Zhu J (2017) A comprehensive study on a novel concentric cylindrical thermoelectric power generation system. Appl Therm Eng 117:501â510
Hwang J et al (2017) More than half reduction in price per watt of thermoelectric device without increasing the thermoelectric figure of merit of materials. Appl Energy 205:1459â1466
Iezzi B, Ankireddy K, Twiddy J, Losego MD, Jur JS (2017) Printed, metallic thermoelectric generators integrated with pipe insulation for powering wireless sensors. Appl Energy 208:758â765
Jänsch D (2017) Energy and thermal management, air conditioning, waste heat recovery
Jiang W et al (2017) Energy harvesting from asphalt pavement using thermoelectric technology. Appl Energy 205:941â950
Ju C, Dui G, Zheng HH, Xin L (2017) Revisiting the temperature dependence in material properties and performance of thermoelectric materials. Energy 124:249â257
Kang BO, Lee M, Kim Y, Jung J (2018) Economic analysis of a customer-installed energy storage system for both self-saving operation and demand response program participation in South Korea. Renew Sustain Energy Rev 94:69â83
Kempf N, Zhang Y (2016) Design and optimization of automotive thermoelectric generators for maximum fuel efficiency improvement. Energy Convers Manag 121:224â231
Kim TY, Negash A, Cho G (2017) Experimental and numerical study of waste heat recovery characteristics of direct contact thermoelectric generator. Energy Convers Manag 140:273â280
Kirihara K, Wei Q, Mukaida M, Ishida T (2017) Thermoelectric power generation using nonwoven fabric module impregnated with conducting polymer PEDOT:PSS. Synth Met 225:41â48
KĂźtt L, Millar J, Karttunen A, Lehtonen M, Karppinen M (2015) Thermoelectric applications for energy harvesting in domestic applications and micro-production units. Part I: thermoelectric concepts, domestic boilers and biomass stoves. Renew Sustain Energy Rev 1â26
Lan S, Yang Z, Chen R, Stobart R (2018) A dynamic model for thermoelectric generator applied to vehicle waste heat recovery. Appl Energy 210:327â338
Laux E et al (2016) Development of thermoelectric generator based on ionic liquids for high temperature applications. Eur. Conf. Thermoelectr. 5(4):10195â10202
Lefèvre R, Berthebaud D, PĂŠrez O, Pelloquin D, Boudin S, Gascoin F (2017) Ultra-low thermal conductivity of TlIn5Se8and structure of the new complex chalcogenide Tl0.98In13.12Se16.7Te2.3. J Solid State Chem 250:114â120
Lewandowski CM (2015) Modern theory of thermoelectricity. In: Effect of brief mindfulness intervention on acute pain experience: an examination of individual difference, vol 1
Li C et al (2017a) A simple thermoelectric device based on inorganic/organic composite thin film for energy harvesting. Chem Eng J 320:201â210
Li Y, Wang S, Zhao Y, Lu C (2017b) Experimental study on the influence of porous foam metal filled in the core flow region on the performance of thermoelectric generators. Appl Energy 207:634â642
Liu D, Cai Y, Zhao FY (2017) Optimal design of thermoelectric cooling system integrated heat pipes for electric devices. Energy 128:403â413
Lu W, Xiao R, Yang J, Li H, Zhang W (2017) Data mining-aided materials discovery and optimization. J Mater 3(3):191â201
Makki A, Omer S, Sabir H (2015) Advancements in hybrid photovoltaic systems for enhanced solar cells performance. Renew Sustain Energy Rev 41:658â684
Makki A, Omer S, Su Y, Sabir H (2016) Numerical investigation of heat pipe-based photovoltaic-thermoelectric generator (HP-PV/TEG) hybrid system. Energy Convers Manag 112:274â287
Maolikul S, Kiatgamolchai S, Chavarnakul T (2017) Low-power energy harvesting of thermoelectric battery charger with step-up DCâDC converter: applicable case study for personal electronic gadgets. J Energy Eng 143(4):05017001
Meng JH, Wang XD, Chen WH (2016) Performance investigation and design optimization of a thermoelectric generator applied in automobile exhaust waste heat recovery. Energy Convers Manag 120:71â80
Mustafa KF, Abdullah S, Abdullah MZ, Sopian K (2017) A review of combustion-driven thermoelectric (TE) and thermophotovoltaic (TPV) power systems. Renew Sustain Energy Rev 71:572â584
Nandhakumar I, White NM, Beeby S (2016) Thermoelectric materials and devices
Negash A (2017) Direct contact thermoelectric generator (DCTEG): A concept for removing the contact resistance between thermoelectric modules and heat source. Energy Convers Manag 142:20â27
Nesarajah M, Frey G (2016) Thermoelectric power generation: Peltier element versus thermoelectric generator. In: IECON Proceedings (Industrial Electronics Conference), pp 4252â4257
Nesarajah M, Frey G (2017) Optimized design of thermoelectric energy harvesting systems for waste heat recovery from exhaust pipes. Appl Sci 7(6):634
Omer G, Yavuz AH, Ahiska R (2017) Heat pipes thermoelectric solar collectors for energy applications. Int J Hydrog Energy 42(12):8310â8313
Ong KS, Tan CF, Lai KC (2017) Methodological considerations of using thermoelectrics with fin heat sinks for cooling applications. Appl Sci 7(2):1â11
Orr B, Akbarzadeh A (2017) Prospects of waste heat recovery and power generation using thermoelectric generators. Energy Procedia 110:250â255
Panayiotou GP et al (2017) Preliminary assessment of waste heat potential in major European industries. Energy Procedia 123:335â345
Petsagkourakis I et al (2018) Correlating the Seebeck coefficient of thermoelectric polymer thin films to their charge transport mechanism. Org Electron Phys Mater Appl 52:335â341
Poddar VS, Dhokey NB, Garbade RR, Butee SP, Prakash D, Purohit RD (2017) Rapid production of iron disilicide thermoelectric material by hot press sintering route. Mater Sci Semicond Process 71:477â481
Rana S, Orr B, Iqbal A, Ding LC, Akbarzadeh A, Date A (2017) Modelling and optimization of low-temperature waste heat thermoelectric generator system. Energy Procedia 110:196â201
Rehman NU, Siddiqui MA (2017) Performance model and sensitivity analysis for a solar thermoelectric generator. J Electron Mater 46(3):1794â1805
Ren Z, Lan Y, Zhang Q (2017) Advanced thermoelectrics: materials, contacts, devices, and systems. In: Materials Science and Engineering, p 790. CRC Press. https://www.crcpress.com/Advanced-Thermoelectrics-Materials-Contacts-Devices-and-Systems/Ren-Lan-Zhang/p/book/9781498765725. ISBN 9781498765725. CAT# K29106
Rogl G, Rogl P (2017) How nanoparticles can change the figure of merit, ZT, and mechanical properties of skutterudites. Mater Today Phys 3:48â69
Rogl G et al (2018) Nanostructuring as a tool to adjust thermal expansion in high ZT skutterudites. Acta Mater 145:359â368
Sajid M, Hassan I, Rahman A (2017) An overview of cooling of thermoelectric devices. Renew Sustain Energy Rev 78:15â22
Sathe TM, Dhoble AS (2017) A review on recent advancements in photovoltaic thermal techniques. Renew Sustain Energy Rev 76:645â672
Savani I, Waage MH, Børset M, Kjelstrup S, Wilhelmsen Ă (2017) Harnessing thermoelectric power from transient heat sources: Waste heat recovery from silicon production. Energy Convers Manag 138:171â182
Schwall M, Balke B (2018) On the Phase Separation in n-Type thermoelectric half-Heusler materials. Materials (Basel, Switzerland) 11(4):1â17
Siddique ARM, Mahmud S, Van Heyst B (2017) A review of the state of the science on wearable thermoelectric power generators (TEGs) and their existing challenges. Renew Sustain Energy Rev 73:730â744
Siouane S, JovanoviÄ S, Poure P (2017) Equivalent electrical circuits of thermoelectric generators under different operating conditions. Energies 10(3)
Skovajsa J, KolĂĄÄek M, ZĂĄleĹĄĂĄk M (2017) Phase change material based accumulation panels in combination with renewable energy sources and thermoelectric cooling. Energies 10(2)
Stobart R, Wijewardane MA, Yang Z (2017) Comprehensive analysis of thermoelectric generation systems for automotive applications. Appl Therm Eng 112:1433â1444
Sun Y, Xu W, Di C, Zhu D (2017) Metal-organic complexes-towards promising organic thermoelectric materials. Synth Met 225:22â30
Sun D, Shen L, Sun M, Yao Y, Chen H, Jin S (2018) An effective method of evaluating the device-level thermophysical properties and performance of micro-thermoelectric coolers. Appl Energy 219:93â104
Tappura K (2018) A numerical study on the design trade-offs of a thin-film thermoelectric generator for large-area applications. Renew Energy 120:78â87
Tuley R, Simpson K (2017) ZT optimization: an application focus. Materials (Basel) 10(3)
Wang BL (2017) A finite element computational scheme for transient and nonlinear coupling thermoelectric fields and the associated thermal stresses in thermoelectric materials. Appl Therm Eng 110:136â143
Wang X, Wang ZM (eds) (2014) Nanoscale thermoelectrics, vol 16
Wang BL, Guo YB, Zhang CW (2016) Cracking and thermal shock resistance of a Bi2Te3 based thermoelectric material. Eng Fract Mech 152:1â9
Wang C, CalderĂłn C, Wang YD (2017) An experimental study of a thermoelectric heat exchange module for domestic space heating. Energy Build 145:1â21
Wang P, Wang KF, Wang BL, Cui YJ (2018) Effective thermoelectric conversion properties of thermoelectric composites containing a crack/hole. Compos Struct 191:180â189
Wood L, Manager S (2018) Global thermoelectric energy harvesting market 2018â2028âtechnologies, devices & applications for thermoelectric generatorsâResearch and Markets, pp 1â4
Yang T, Xie D, Li Z, Zhu H (2017) Recent advances in wearable tactile sensors: materials, sensing mechanisms, and device performance. Mater Sci Eng R Rep 115:1â37
Yusop AM, Mohamed R, Mohamed A (2016) Inverse dynamic analysis type of MPPT control strategy in a thermoelectric-solar hybrid energy harvesting system. Renew Energy 86:682â692
Yusop AM, Mohamed R, Ayob A, Mohamed A (2017) Shapeable maximum-power point-tracking algorithm to improve the stability of the output behavior of a thermoelectric-solar hybrid energy-harvesting system. J Assoc Arab Univ Basic Appl Sci 22:1â8
Zhang H et al (2016) The investigation of thermal properties on multilayer Sb2Te3/Au thermoelectric material system with ultra-thin Au interlayers. Superlattices Microstruct 89:312â318
Zhang Z, Yue H, Chen D, Qin D, Chen Z (2017a) Machine-thermal coupling stresses analysis of the fin-type structural thermoelectric generator. J Electron Mater 46(5):3156â3165
Zhang AB, Wang BL, Wang J, Du JK, Xie C, Jin YA (2017b) Thermodynamics analysis of thermoelectric materials: influence of cracking on efficiency of thermoelectric conversion. Appl Therm Eng 127:1442â1450
Zhu DC, Su CQ, Deng YD, Wang YP, Liu X (2018) The influence of the inner topology of cooling units on the performance of automotive exhaust-based thermoelectric generators. J Electron Mater 47(6):3320â3329
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
Š 2019 Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Motoasca, E. (2019). Energy Sustainability Through the Use of Thermoelectric Materials in Waste Heat Recovery Systems Recent Developments and Challenges. In: Motoasca, E., Agarwal, A., Breesch, H. (eds) Energy Sustainability in Built and Urban Environments. Energy, Environment, and Sustainability. Springer, Singapore. https://doi.org/10.1007/978-981-13-3284-5_11
Download citation
DOI: https://doi.org/10.1007/978-981-13-3284-5_11
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-3283-8
Online ISBN: 978-981-13-3284-5
eBook Packages: EnergyEnergy (R0)