Abstract
Predictive engine simulations are key for rapidly exploring and optimizing the design of cleaner burning and more fuel-efficient engines. Injection strategies in advanced engine concepts are resulting in the injection and atomization of fuel under a wide range of operating conditions in order to meet stringent emission regulations. However, the physics governing the breakup of an injected liquid fuel jet into droplets under these conditions have not been well studied or experimentally characterized to date. It is uncertain whether existing atomization and spray breakup models, historically developed to study conventional diesel operation, can be directly applied within engine CFD simulations to study new advanced engine concepts. This chapter summarizes recent progress made in developing an improved physics-based primary atomization model for use in diesel engine simulations across a broad range of in-cylinder conditions. Physical mechanisms that are likely to contribute to the atomization of diesel sprays are first reviewed, with a particular focus on aerodynamic wave growth on the fuel jet surface and turbulence generated in the injector. Then, recent advances in spray diagnostics that have informed characteristic length scales of primary atomization are highlighted. The chapter concludes with the presentation and validation of a newly developed hybrid spray breakup model, the “KH-Faeth” model, capable of representing both aerodynamic and turbulent breakup mechanisms in the atomization of non-cavitating diesel sprays.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Amsden AA, O’Rourke P, Butler T (1989) Kiva-ii: A computer program for chemically reacting flows with sprays. Technical report la-11560-ms, Los Alamos National Laboratory
Beale JC, Reitz RD (1999) Modeling spray atomization with the kelvin-helmholtz/rayleigh-taylor hybrid model. Atomization Sprays 9:623–650
Behrendt T, Carl M, Heinze J, Hassa C, Optical measurements of the reacting two-phase flow in a realistic gas turbine combustor at elevated pressures. Atomization and Sprays 16:5
Bergwerk W (1959) Flow pattern in diesel nozzle spray holes. Proc Inst Mech Eng 173:655
Bianchi GM, Pelloni P (1999) Modeling the diesel fuel spray breakup by using a hybrid model. SAE technical paper 1999-01-0226
Bode M, Diewald F, Broll DO, Heyse JF, Chenadec VL (2014) Influence of the injector geometry on primary breakup in diesel injector systems. SAE technical paper, no. 2014-01-1427
Borenstein G (2012) The more pixels law: gigapixel cameras and the 21st century reality effect. http://makematics.com/drafts/more_pixels_law.html
Borodin V, Dityakin Y (1951) Unstable capillary waves on surface of separation of two viscous liquids. N.A.C.A, TM
Castleman RA (1931) The mechanism of the atomization of liquids. US Department of Commerce, Bur Stan
Castleman R (1932) Mechanism of atomization accompanying solid injection. N.A.C.A, Report, p 440
Crua C, Heikal M, Gold M (2015) Microscopic imaging of the initial stage of diesel spray formation. Fuel 157:140–150
DeJuhasz K (1931) Dispersion of sprays in solid injection oil engines. Trans Am Soc Mech Eng 53
Dempsey AB, Curran SJ, Wagner RM (2016) A perspective on the range of gasoline compression ignition combustion strategies for high engine efficiency and low nox and soot emissions: effects of in-cylinder fuel stratification. Int J Engine Res
D’Errico G, Lucchini T, Jangi M, Contino F (2014) Comparison of well-mixed and multiple representative interactive flamelet approaches for diesel spray combustion modelling. Combustion Theory and Modelling 18:65–88
Drazin PG, Reid WH (2004) Hydrodynamic stability. Cambridge university press
Duke D, Swantek A, Tilocco F, Kastengren A et al (2014) X-ray imaging of cavitation in diesel injectors. SAE Int J Eng 7(2):1003–1016
Dukowicz JK (1980) A particle-fluid numerical model for liquid sprays. J Comput Phys 35(2):229–253
Eckhause J, Reitz R (1995) Modeling heat transfer to impinging fuel sprays in direct injection engines. Atomization Sprays
Engine Combustion Network (2018) Engine Combustion Network Experimental Data Archive. http://www.sandia.gov/ECN
Faeth G, Hsiang L-P, Wu P-K (1995) Structure and breakup properties of sprays. Int J Multiph Flow 21:99–127
Fluent (2005) FLUENT 6.2 User’s Guide
Genzale C, Pickett L, Kook S (2010) Liquid penetration of diesel and biodiesel sprays at late-cycle post-injection conditions. SAE Int J Engines 3(1):479
Giffen E, Muraszew A (1970) The atomization of liquid fuels. Wiley
Grant R, Middleman S (1966) Newtonian jet stability A.I.Ch.E. 12
Haenlein A (1932) On the disruption of a liquid jet. N.A.C.A, TM, p 659
Hiroyasu H, Kadota T (1974) Fuel droplet size distribution in diesel combustion chamber. SAE technical paper 740715
Hooper P, Eisenklam P (1958) Ministry of supply dggw report. EMR/58/JRL/42
Huh KY, Gosman A (1991) A phenomenological model of diesel spray atomization. in Multiphase Flows. Tsukuba, Japan
Huh K, Lee E, Koo J (1998) Diesel spray atomization model considering nozzle exit turbulence conditions. Atomization Sprays 8(4):453–469
Ilavsky J, Jemian P (2009) Irena: tool suite for modeling and analysis of small-angle scattering. J Appl Crystallogr 42(2):347–353
Ilavsky J, Jemian P, Allen A, Zhang F, Levine L, Long G (2009) Ultra-small-angle x-ray scattering at the advanced photon source. J. Appl Crystallogr
Iyer VA, Post SL, Abraham J (2000) Is the liquid penetration in diesel sprays mixing controlled? Proc Combust Inst 28:1111–1118
Kastengren AL, Tilocco FZ, Powell CF, Manin J, Pickett LM, Payri R, Bazyn T (2012) Engine combustion network (ECN): measurements of nozzle geometry and hydraulic behavior. Atomization Sprays 22(12):1011–1052
Kastengren A, Tilocco F, Duke D, Powell C, Zhang X, Moon S (2014) Time-resolved x-ray radiography of sprays from engine combustion network spray a diesel injectors. Atomization Sprays 24(3):251–272
Kastengren A, Ilavskya J, Vierab JP, Payri R, Duke D, Swantek A, Tilocco FZ, Sovis N, Powell C (2017) Measurements of droplet size in shear-driven atomization using ultra small angle x-ray scattering. Int J Mulitphase Flows
Kastengren A, Powell C (2014) Synchrotron x-ray techniques for fluid dynamics. Exp Fluids 55(3)
Kastengren A, Powell C, Arms D, Dufresne E, Gibson H, Wang J (2012) The 7bm beamline at the aps: a facility for time-resolved fluid dynamics measurements. J Synchrotron Radiat. 19(4)
Kastengren A, Powell C, Riedel T, Cheong S-K, Im K-S, Liu X, Wang Y Wang J (2008) Nozzle geometry and injection duration effects on diesel sprays measured by x-ray radiography. J Fluids Eng 130(4)
Kim S, Magnotti G, Martinez G, Yraguen B, Knox B, Kastengren A, Matusik K, Sforzo B, Powell C, Lucchini T, D’Errico G, Genzale C, Validation of a new turbulence-induced Lagrangian primary breakup model for diesel spray atomization. In: 14th International Conference on Liquid Atomization and Spray Systems (ICLASS) (Chicago, IL), July 2018
Kim J, Nishida K, Hiroyasu H (1997) Characteristics of the internal flow in a diesel injection nozzle. Proceedings of ICLASS 1997
Kodavasal J, Kolodziej C, Ciatti S, Som S (2014) CFD simulation of gasoline compression ignition. In: ASME 2014 Internal Combustion Engine Division Fall Technical Conference. American Society of Mechanical Engineers, pp V002T06A008–V002T06A008
Kong S-C, Han Z, Reitz R (1995) The development and application of a diesel ignition and combustion model for multidimensional engine simulations. SAE Paper 950278
Lee D, Spencer R (1933) Photomicrographic studies of fuel sprays. N.A.C.A, Report No, p 454
Levich V (1962) Physicochemical Hydrodyn. Prentice Hall
Liu A, Mather D, Reitz R (1993) Modeling the effects of drop drag and breakup on fuel sprays. SAE Paper 930072
Lucchini T, D’Errico G, Ettorre D (2011) Numerical investigation of the spray-mesh-turbulence interactions for high-pressure, evaporating sprays at engine conditions. Int J Heat Fluid Flow 32:285–297
Magnotti GM, Genzale CL (2017) Detailed assessment of diesel spray atomization models using visible and x-ray extinction measurements. Int J Multiph Flow
Magnotti GM, Genzale CL (2017) Exploration of turbulent atomization mechanisms for diesel spray simulations. In: Proceedings of the 2017 SAE World Congress (Detroit, MI)
Magnotti GM (2017) Modeling the Influence of Nozzle-Generated Turbulence on Diesel Sprays. Ph.D. thesis, Georgia Institute of Technology, Atlanta, GA
Magnotti GM, Matusik KE, Duke DJ, Knox BW, Martinez GL, Powell CF, Kastengren AL, Genzale CL (2017) Modeling the influence of nozzle-generated turbulence on diesel sprays. in ILASS Americas 29th Annual Conference. Atlanta, GA
Matusik KE, Duke DJ, Kastengren AL, Sovis N, Swantek AB, Powell CF (2017) High-resolution X-ray tomography of Engine Combustion Network diesel injectors. Int J Engine Res
Matusik K, Duke D, Swantek A, Powell C, Kastengren A (2016) High resolution x-ray tomography of injection nozzles. In: 28th ILASS-Americas Conference. Dearborn, MI
McCarthy M, Molloy N (1974) Review of stability of liquid jets and the influence of nozzle design. Chem Eng J 7
Munnannur A (2007) Droplet Collision Modeling in Multi-Dimensional Engine Spray Computations. Ph.D. thesis, University of Wisconsin-Madison,
Munson B, Okiishi T, Huebsch W, Rothmayer A (2013) Fundamentals of fluid mechanics. Wiley, Hoboken, NJ
Ning W (2007) Development of a next-generation spray and atomization model using an Eulerian-Lagrangian methodology. Ph.D. thesis, University of Wisconsin-Madison
NIST (2018) Thermophysical properties of dodecane. http://webbook.nist.gov/cgi/fluid.cgi?ID=C112403&Action=Page
O’Rourke P, Bracco F (1980) Modeling of drop interactions in thick sprays and a comparison with experiments. I Mech E 9:101–116
Pastor J, Payri R, Salavert J, Manin J (2012) Evaluation of natural and tracer fluorescent emission methods for droplet size measurements in a diesel spray. Int J Automot Technol 13(5):713–724
Patterson M, Kong S-C, Hampson G, Reitz R (1994) Modeling the effects of fuel injection characteristics on diesel engine soot and nox emissions. SAE Paper 940523
Payri F, Bermúdez V, Payri R, Salvador F (2004) The influence of cavitation on the internal flow and the spray characteristics in diesel injection nozzles. Fuel 83:419–431
Payri R, Salvador F, Gimeno J, Bracho G (2008) A new methodology for correcting the signal cumulative phenomenon on injection rate measurements. Exp Techn 32(1):46–49
Payri F, Pastor JV, Payri R, Manin J (2011) Determination of the optical depth of a DI diesel spray. J Mech Sci Technol 25:209–219
Pickett L, Kook S (2009) Transient liquid penetration of early-injection diesel sprays. Int J Engines 4970
Pope SB (2000) Turbulent flows. Cambridge University Press
Powell C, Duke D, Kastengren A, Ilavsky J (2013) Measurements of diesel spray droplet size with ultra-small angle x-ray scattering. In 25th ILASS-Americas conference. Pittsburgh, PA
Ranz W (1956) On sprays and spraying. Department of Engineering Research Penn State University Bulletin
Rayleigh W (1878) On the instability of jets. Proc London Mathe Soc 4
Reitz R (1978) Atomization and other breakup regimes of a liquid jet. Ph.D. thesis, Princeton University
Reitz RD, Diwakar R (1987) Structure of high-pressure fuel sprays SAE Technical Paper
Reitz RD (1987) Modeling atomization processes in high pressure vaporizing sprays. Atomization Spray Technol 3(4):309–337
Reitz R, Bracco F (1982) Mechanism of atomization of a liquid jet. Phys Fluids 25(10):1730–1742
Reitz RD, Bracco F (1986) Mechanisms of breakup of round liquid jets. Encycl Fluid Mech 3:233–249
Reitz R, Bracco FB (1979) On the dependence of spray angle and other spray parameters on nozzle design and operating conditions. In: SAE Technical paper series
Richards K, Senecal P, Pomraning E (2013) CONVERGE 2.1. 0 Theory Manual, Convergent Science
Ruff G, Sagar A, Faeth G (1987) Structure of the near-injector region of pressure-atomized sprays. AIAA J 27:549–559
Rupe J (1962) On the dynamic characteristics of free-liquid jets and a partial correlation with orifice geometry. J.P.L, Technical report No, p 32
Sadek R (1959) Communication to bergwerk. Proc Inst Mech Eng 173
Schmidt DP (1997) Cavitation in diesel fuel injector nozzles. Ph.D. thesis, University of Wisconsin - Madison
Schweitzer P (1937) Mechanism of disintegration of liquid jets. J Appl Phys 8
Siebers D (1998) Liquid-phase fuel penetration in diesel sprays. SAE Paper 980809
Siebers DL (1999) Scaling liquid-phase fuel penetration in diesel sprays based on mixing-limited vaporization. SAE 01–0528:724
Sitkei G (1959) On the theory of jet atomization. Acta Tech Acad Sci Hungaricae 25
Soare VT (2007) Phase Doppler Measurements in Diesel Dense Sprays: Optimisation of Measurements and Study of the Orifice Geometry Influence over the Spray at Microscopic Level. Ph.D. thesis, Universidad Politecnica de Valencia
Som S (2009) Development and Validation of Spray Models for Investigating Diesel Engine Combustion and Emissions. Ph.D. thesis, University of Illinois at Chicago
Som S, Aggarwal SK (2009) Assessment of atomization models for diesel engine simulations. Atomization Sprays 19(9):885–903
Som S, Aggarwal S (2010) Effects of primary breakup modeling on spray and combustion characteristics of compression ignition engines. Combust Flame 157:1179–1193
Som S, Ramirez AI, Aggarwal SK, Kastengren AL (2009) Development and validation of a primary breakup model for diesel engine applications. SAE technical paper 2009-01-0838
SPhERe Lab Homepage (2012) http://www.spherelab.gatech.edu
Sterling A, Sleicher C (1975) The instability of capillary jets. J Fluid Mech 68:477
Taylor J, Hoyt J (1983) Water jet photography-techniques and methods. Exp Fluids 1(3):113–120
Tennekes H, Lumley J (1972) A first course in turbulence. Press, M.I.T
United States Environmental Protection Agency (2003) EPA420-F-03-022. Fact sheet: diesel exhaust in the United States
Wang J (2005) X-ray vision of fuel sprays. J Synchrotron Radiat 12(2):197–207
Weber C (1931) On the breakdown of a fluid jet. Z.A.M.P. 11:136
Weller H, Tabor G, Jasak H, Fureby C (1998) A tensorial approach to cfd using object oriented techniques. Comput Phys 12(6):620
Wu P-K, Faeth G (1993) Aerodynamic effects of primary breakup of turbulent liquids. Atomization Sprays 3(3):265–289
Wu P-K, Tseng L-K, Faeth G (1992) Primary breakup in gas/liquid mixing layers for turbulent liquids. Atomization Sprays 2:295–317
Wu P-K, Mirand R, Faeth G (1995) Effects of initial flow conditions on primary breakup of nonturbulent and turbulent round liquid jets. Atomization and Sprays 5:175–196
Xue Q, Battistoni M, Som S, Quan S, Senecal P, Pomraning E, Schmidt D (2014) Eulerian cfd modeling of coupled nozzle flow and spray with validation against x-ray radiography data. SAE Int J Engines 7(2014-01-1425):1061–1072
Yue Y, Powell CF, Poola R, Wang J, Schaller JK (2001) Quantitative measurements of diesel fuel spray characteristics in the near-nozzle region using x-ray absorption. Atomization Sprays 11:4
Yule A, Mo S, Tham S, Aval S (1985) Diesel spray structure. Proceedings of the third international conference on liquid atomization and spray systems
Zaheer H (2015) Transient microscopy of primary atomization in gasoline direct injection sprays. Master’s thesis, Georgia Institute of Technology
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Magnotti, G.M., Genzale, C.L. (2019). Recent Progress in Primary Atomization Model Development for Diesel Engine Simulations. In: Saha, K., Kumar Agarwal, A., Ghosh, K., Som, S. (eds) Two-Phase Flow for Automotive and Power Generation Sectors. Energy, Environment, and Sustainability. Springer, Singapore. https://doi.org/10.1007/978-981-13-3256-2_4
Download citation
DOI: https://doi.org/10.1007/978-981-13-3256-2_4
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-3255-5
Online ISBN: 978-981-13-3256-2
eBook Packages: EngineeringEngineering (R0)