Abstract
Wells turbine is an axial flow air turbine extensively used in the oscillating water column (OWC) of ocean energy harvesting device. The turbine has low aerodynamic efficiency at higher flow rate and poor starting characteristics. In this paper, the characteristics of the hysteresis behavior of a Wells turbine for a wave energy conversion device under alternative axial flow conditions are reported. The numerical work is carried out by solving the three-dimensional unsteady Reynolds Average Navier–Stokes equations (URANS) with two-equation eddy viscosity model. It is noticed that the unsteady numerical results are associated with two hysteresis loop. In the clockwise hysteresis loop, larger flow separation can be noticed on the blade suction side due to stronger vortex while flow separation decreases due to weaker vortex during counterclockwise hysteresis loop. Also, the effect of the blade sweep and blade profile thickness on the hysteresis behavior of the wave energy conversion device are reported.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Brito-Melo A, Gato LMC, Sarmento AJNA (2002) Analysis of Wells turbine design parameters by numerical simulation of the OWC performance. Ocean Eng 29:1463–1477. https://doi.org/10.1016/S0029-8018(01)00099-3
Raghunathan S (1995) The Wells air turbine for wave energy conversion. Prog Aerosp Sci 31:335–386. https://doi.org/10.1016/0376-0421(95)00001-F
Torresi M, Camporeale SM, Strippoli PD, Pascazio G (2008) Accurate numerical simulation of a high solidity Wells turbine. Renew Energy 33:735–747. https://doi.org/10.1016/j.renene.2007.04.006
Halder P, Samad A, Kim J-H, Choi Y-S (2015) High performance ocean energy harvesting turbine design–a new casing treatment scheme. Energy 86:219–231. https://doi.org/10.1016/j.energy.2015.03.131
Taha Z, Sugiyono Sawada T (2010) A comparison of computational and experimental results of Wells turbine performance for wave energy conversion. Appl Ocean Res 32:83–90. https://doi.org/10.1016/j.apor.2010.04.002
Halder P, Samad A, Thévenin D (2017) Improved design of a Wells turbine for higher operating range. Renew Energy 106:122–134. https://doi.org/10.1016/j.renene.2017.01.012
Halder P, Samad A (2016) Torque and efficiency maximization for a wave energy harvesting turbine: an approach to modify multiple design variables. Int J Energy Res 1–15. https://doi.org/10.1002/er.3694
Halder P, Rhee SH, Samad A (2016) Numerical optimization of Wells turbine for wave energy extraction. Int J Naval Architect Ocean Eng. https://doi.org/10.1016/j.ijnaoe.2016.06.008
Kim T, Lee, Yeon- Won, Ill-Kyoo Park, Toshiaki Setoguchi C-SK (2002) Numerical analysis for unsteady flow characteristics of the Wells turbine. In: Proceedings of the twelfth international offshore and polar engineering conference. Kitakyushu, Japan, May 26–31, 2002, pp 694–699
Kim T-H, Takao M, Setoguchi T et al (2001) Performance comparison of turbines for wave power conversion. Int J Therm Sci 40:681–689. https://doi.org/10.1016/S1290-0729(01)01257-1
Inoue M, Kaneko K, Setoguchi T, Shimamoto K (1986) Studies on Wells turbine for wave power generator. Japan Soc Mech Eng 29:1177–1182
Das TK, Halder P, Samad A (2017) Optimal design of air turbines for oscillating water column wave energy systems: a review. Int J Ocean Climate Syst 8:37–49. https://doi.org/10.1177/1759313117693639
Thakker A, Abdulhadi R (2007) Effect of blade profile on the performance of Wells turbine under unidirectional sinusoidal and real sea flow conditions. Int J Rotat Mach 2007:1–8. https://doi.org/10.1155/2007/51598
Thakker A, Abdulhadi R (2008) The performance of Wells turbine under bi-directional airflow. Renew Energy 33:2467–2474. https://doi.org/10.1016/j.renene.2008.02.013
Kinoue Y, Setoguchi T, Kim T-H et al (2003) Mechanism of hysteretic characteristics of Wells turbine. Trans ASME 125:302–307. https://doi.org/10.1299/kikaib.69.610
Kinoue Y, Setoguchi T, Kim TH et al (2005) Hysteretic characteristics of the Wells turbine in a deep stall condition. Proc Institution Mech Eng, Part M J Eng Maritime Environ 218:167–173. https://doi.org/10.1243/1475090041737967
Curran R, Gato LMC (1997) The energy conversion performance of several types of Wells turbine designs. Proc Institution Mech Eng, Part M J Eng Maritime Environ 211:133–145. https://doi.org/10.1243/0957650971537051
Kinoue Y, Setoguchi T, Kim TH et al (2004) Hysteretic characteristics of the Wells turbine in a deep stall condition. Proc Institution Mech Eng, Part M J Eng Maritime Environ 218:167–173. https://doi.org/10.1243/1475090041737967
Kinoue Y, Mamun M, Setoguchi T, Kaneko K (2004) Hysteretic characteristics of monoplane and biplane Wells turbine for wave power conversion. Int J Sustain Energ 26:51–60. https://doi.org/10.1016/j.enconman.2003.08.021
Author information
Authors and Affiliations
Corresponding authors
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Halder, P., Das, T.K., Samad, A., Mohamed, M.H. (2019). Hysteresis Behavior for Wave Energy Conversion Device Under Alternative Axial Flow Conditions. In: Murali, K., Sriram, V., Samad, A., Saha, N. (eds) Proceedings of the Fourth International Conference in Ocean Engineering (ICOE2018). Lecture Notes in Civil Engineering , vol 23. Springer, Singapore. https://doi.org/10.1007/978-981-13-3134-3_53
Download citation
DOI: https://doi.org/10.1007/978-981-13-3134-3_53
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-3133-6
Online ISBN: 978-981-13-3134-3
eBook Packages: EngineeringEngineering (R0)