Skip to main content
SpringerLink
Log in

Perspective Composition Materials for Electrode-Tools Production

  • Chapter
  • First Online:
Futuristic Composites

Part of the book series: Materials Horizons: From Nature to Nanomaterials ((MHFNN))

Abstract

This chapter reports the result of an experimental study to examine the physical, mechanical properties of electrode-tools made from copper-based composite materials with the addition of refractory metals, ceramic, graphite phases in the erosion of tool steel. Composite materials based on copper with different contents of the refractory phase were made by powder metallurgy. Electrodes’ wear rate made from “copper–chromium” is lower than traditionally used compounds made from pure copper M1 and “copper–tungsten” material. Using methods of X-ray phase and Raman Effect, spectrum analysis investigated the formation of intercalated graphite with copper and sp3 connections in graphite, sintered with copper. During the sintering of the “copper–titanium carbide” and “copper–titanium carbonitride” chemical interaction was not observed. However, in the copper–carbosilicate titanium system, dissociation of the compound was established such as de-siliconization from titanium carbosilicide grains, part of titanium carbosilicide grains was converted to carbon-based Titanium silicide Ti5Si3 (C) and small amounts of titanium carbide, silicon carbide, and titanium silicide TiSi2. The lowest porosity (6%) was witnessed in materials containing titanium carbosilicide, regardless of its content. The flexural strength was 2 times higher in systems with titanium carbosilicide in comparison with carbide and titanium carbonitride. When investigating the relative wear of the electrode during the machining of tool steel, it was established that all the studied systems have better wear resistance than pure copper and copper–tungsten carbide material.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Log in via an institution
eBook
USD 16.99
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book
USD 109.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info
Hardcover Book
USD 109.99
Price excludes VAT (USA)
  • Durable hardcover edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

Similar content being viewed by others

Abbreviations

CNT:

Carbon nanotubes

D :

Interplanar distance (nm)

EDM:

Electric discharge machining

ET:

Electrode-tool

НВ:

Hardness (MPa)

I :

Intensity (%)

P:

Porosity (%)

R a :

Surface roughness (µm)

TEG:

Thermally expanded graphite

σ b :

Flexural strength (MPa)

References

  1. Serebrenitsky PP (2007) Modern erosion technologies and equipment: training, allowance. Baltimore State Technologies University. St. Petersburg, Russia

    Google Scholar 

  2. Panov DO, Ablyaz TR, Abrosimova AA (2013) Metallographic analysis of the surface of 65G steel after electro erosion treatment. Mod Probl Sci Educ [Electron Resour] (5):232. Access mode: http://www.science-education.ru/pdf/2013/5/232.pdf. Version from the screen

  3. Nemilov EF (1983) Electroerosive processing of materials: a textbook for vocational school. Machine building, Leningrad. Department, Leningrad, Russia

    Google Scholar 

  4. Matvienko EV, Varaksin MA, Blinov TA (2011) Influence of electrode tool material on the choice of erosion control modes. Sb. doc. In: International scientific-practical conference of students, graduate students and young scientists “Youth and scientific and technological progress”. Part 1, Gubkin: OOO Aikyu, Moscow, pp 134–137

    Google Scholar 

  5. Bates CH (2004) Effect on the performance of the electrode material electroerosion machining. Am Machinist 148(2):56–57

    Google Scholar 

  6. Dubois D (2002) Copper or graphite—the choice of materials for electrodes duplicating machine tools machining (2002). TraMetal (66):57–58

    Google Scholar 

  7. Zhurin AV (2005) Methods for calculating process parameters and tool electrodes for electroerosion processing. Abstract of Ph.D. dissertation, Tula state. University, Tula, Russia

    Google Scholar 

  8. Eliseev YuS, Saushkin BP (2010) Electroerosive processing of aerospace products. Izd-vo MSTU him NE, Bauman, Moscow, Russia

    Google Scholar 

  9. Kovalenko VS (2000) Non-traditional methods of processing materials in Japan. Electron Mater Process (3):4–12

    Google Scholar 

  10. Zolotykh BN (2003) On the discovery and development of electroerosive material processing. Electron Process Mater (3):4–9

    Google Scholar 

  11. Nemilov EF (1983) Electroerosive processing of materials: a textbook for vocational schools. Machine building, Leningrad department-e, Leningrad, Russia

    Google Scholar 

  12. Zolotykh BN (1956) Influence of duration of a working impulse on electric erosion of metals. Electricity (8):19–31

    Google Scholar 

  13. Sijanov SY (2002) Technological support of quality of a surface layer of details at electroerosive processing. Abstract of Ph.D. dissertation, BSTU, Bryansk, Russia

    Google Scholar 

  14. Levinson EM and others (1971) Electroerosive treatment of metals. Mechanical Engineering, Leningrad, Russia

    Google Scholar 

  15. Foteev NK (1980) The technology of electroerosive processing. Mechanical Engineering, Moscow, Russia

    Google Scholar 

  16. Nadutkin AV (2007) The study of the synthesis of TI3SIC2 and the formation of structural ceramics on its basis. Abstract of Ph.D. dissertation, PSTU, Perm, Russia

    Google Scholar 

  17. International Center for Diffraction Data—PDF-2 (The Powder Diffraction Files (2001), no. licenz 81200030 [Elektronnyi resurs]

    Google Scholar 

  18. Shukhardin SV (1979) Double and multicomponent copper systems. Science, Moscow, Russia

    Google Scholar 

  19. Shmatko YA, Mustache YV (1987) Electrical and magnetic properties of metals and alloys. Naukova Dumka, Kiev, USSR

    Google Scholar 

  20. Ivenson VA (1985) Phenomenology of sintering and some questions of theory. Metallurgy, Moscow, Russia

    Google Scholar 

  21. Avramov IS, Shliapin AD (1999) New composite materials based on immiscible components: production, structure, properties. MGIU, Moscow, Russia

    Google Scholar 

  22. Mirkin LI (1961) Handbook of X-ray diffraction analysis of polycrystals. Fizmatlit, Moscow, Russia

    Google Scholar 

  23. Kero I (2007) Ti3SiC2 synthesis by powder metallurgical methods. Abstract of Ph.D. dissertation, Luleå University of Technology, Department of Applied Physics and Mechanical Engineering, Luleå, Sweden

    Google Scholar 

  24. Oglezneva CA, Kacheniuk MN, Ogleznev ND (2016) Study of the formation of the structure and properties of materials in the system “copper-carbolicidal titanium”. Izvestiia vuzov. Poroshkovaia metallurgiia i funktsional’nye pokrytiia (4):60–67

    Google Scholar 

  25. Zhou Y, Gu W (2004) Chemical reaction and stability of Ti3SiC2 in Cu during high-temperature processing of Cu/Ti3SiC2 composites. Zeitschrift für Metallkunde 95(1):50–56

    Google Scholar 

  26. Karpinos DM (1985) Composite materials: reference book. Naukova dumka, Kiev, USSR

    Google Scholar 

  27. Ngai Tungwai L, Zheng Wei, Li Yuanyuan (2013) Effect of sintering temperature on the preparation of Cu-Ti3SiC2 metal matrix composite. Prog Nat Sci: Mater Int 23(1):70–76

    Article  Google Scholar 

  28. Dudina DV, Ulianitsky VY, Batraev IS, Korchagin MA, Mali VI, Anisimov AG, Lomovsky OI (2013) Interparticle interactions during consolidation of Ti3SiC2-Cu powders influenced by preliminary mechanical milling. Met Mater Int 19(6):1235–1241

    Google Scholar 

  29. Kosolapova TI (1968) Carbids. Metallurgiia, Moscow, Russia

    Google Scholar 

  30. Ngai TL, Zheng W, Li Y (2013) Effect of sintering temperature on the preparation of Cu-Ti3SiC2 metal matrix composite. Prog Nat Sci: Mater Int 23(1):70–76

    Google Scholar 

  31. Efimov, AI and others (1983) Properties of inorganic compounds. Reference, Chemistry, Leningrad, Russia

    Google Scholar 

  32. Oglezneva SA, Grevnov LM, Zhigalova IV and others (1998) Forms of existence of carbon. Their receipt and application. Perm State Technologies University. Perm, Russia

    Google Scholar 

  33. Belova MY (2008) From the “black chalk” to the seals from the TRG. Armature 1(52):42–49

    Google Scholar 

  34. Mishchenko SV, Tkachev AG (1998) Carbon nanomaterials: production, properties, application. Mechanical Engineering, Moscow, Russia

    Google Scholar 

  35. Tkachev AG, Melezhik AV, Smykov MA et al (2010) Synthesis of beams of multi-walled carbon nanotubes on the catalyst FeCoMo/Al2O3. Chem Technol 11(12):725–732

    CAS  Google Scholar 

  36. Andreeva VD, Stepanova TR (2002) Influence of copper atoms on the graphite structure. Lett ZhTF 18(28):18–23

    Google Scholar 

  37. Kalbus K (2012) Copper intercalation into graphite theses and dissertations. Abstract of Ph.D., The University of Wisconsin-Milwaukee, Wisconsin, United States

    Google Scholar 

  38. Bin X et al (2008) Preparation and structural investigation of CuCl2 graphite intercalation compounds. Acta Geol Sin Russ Edn 82(5):1056–1060

    CAS  Google Scholar 

  39. Amsler M, Flores-Livas JA, Lehtovaara L, Balima F, Ghasemi SA, Machon D, Pailhes S, Willand A, Caliste D, Botti S, San Miguel A, Goedecker S, Marques MAL (2012) Crystal structure of cold compressed graphite. Phys Rev Lett 108(6):065501-1–065501-4

    Google Scholar 

  40. Dunaev AV, Archangelsky IV, Avdeev VV (2007) Creation of nanocarbons with metal nanoparticles from GIC for different applications in catalysis. In: 8th biennial international workshop “Fullerenes and atomic clusters”, St Petersburg, Russia, p 266

    Google Scholar 

  41. Biske NS, Kolodey VS (2014) Spectroscopy of Raman scattering of graphite from deposits and ore occurrences in the Ladoga area. Geol Miner Karelia 17:103–109

    Google Scholar 

  42. Jorio A (2012) Raman spectroscopy in graphene-based systems: prototypes for nanoscience and nanometrology. Rev Art Int Sch Res Netw. ISRN Nanotechnol 2012:1–16

    Google Scholar 

  43. Tikhomirov SV, Kimstach TB (2011) Raman spectroscopy is a promising method for studying carbon nanomaterials. Analytics (11):28–33

    Google Scholar 

  44. Gorsky SY (2014) Development of the process of functionalization of carbon nanotubes in nitrogen acid and hydrogen peroxide. Abstract of Ph.D. dissertation, TSTU, Tambov, Russia

    Google Scholar 

  45. Kostikov VI, Shipov NN, Kalashnikov YL and others (1991) Graphitization and diamond formation. Metallurgy, Moscow, Russia

    Google Scholar 

  46. Ermolaev AA, Laptev AI, Polyakov VP (2000) Influence of the composition of the alloy-catalyst on the mechanism of synthesis and composition of phases of polycrystalline diamond carbonado. Izv. Universities. Non-ferrous Metall (2):62–65

    Google Scholar 

  47. Liu J et al (1998) Fullerene pipes. Science 280:1253

    Article  CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of Materials, Technologies, and Design of Machines, National Research Polytechnic University, Perm, Russia

    Nikita Ogleznev, Svetlana Oglezneva & Timur Ablyaz

Authors
  1. Nikita Ogleznev
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Svetlana Oglezneva
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Timur Ablyaz
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Nikita Ogleznev .

Editor information

Editors and Affiliations

  1. Beant College of Engineering and Technology, Gurdaspur, Punjab, India

    Sarabjeet Singh Sidhu

  2. Beant College of Engineering and Technology, Gurdaspur, Punjab, India

    Preetkanwal Singh Bains

  3. Institut Clément Ader, Toulouse University, Toulouse, France

    Redouane Zitoune

  4. Department of Management, Universidad Loyola Andalucía, Sevilla, Spain

    Morteza Yazdani

Rights and permissions

Reprints and permissions

Copyright information

© 2018 Springer Nature Singapore Pte Ltd.

About this chapter

Check for updates. Verify currency and authenticity via CrossMark

Cite this chapter

Ogleznev, N., Oglezneva, S., Ablyaz, T. (2018). Perspective Composition Materials for Electrode-Tools Production. In: Sidhu, S., Bains, P., Zitoune, R., Yazdani, M. (eds) Futuristic Composites . Materials Horizons: From Nature to Nanomaterials. Springer, Singapore. https://doi.org/10.1007/978-981-13-2417-8_16

Download citation

Publish with us

Policies and ethics

Search

Navigation