Abstract
Researching the wall sticking characteristics of high water cut crude oil can ensure the safety of gathering and transporting at normal temperatures so as to achieve the purpose of energy saving and consumption reduction. Through a large number of oilfield experiments and the use of visual experimental device, the relationship between the inlet temperatures of oil gathering and the pressure drops was obtained, and wall sticking occurrence temperatures were measured in the paper, in which the methods of stopping the heating of three pipes and reducing the inlet temperature of the oil–water were used. The field experiments of two typical oil wells showed that with the reduction in inlet temperatures of oil gathering, the pipeline pressure drop first increased, then decreased, and rose finally. In this study, the wall sticking occurrence temperatures of high water cut crude oil has been measured under the oilfield condition, and it has been verified that the temperature corresponding to the highest turning point in the pipeline pressure drop was the wall sticking occurrence temperature, which has practice instruction significance for the realization of the gathering and transportation at normal temperatures in the actual production of oilfield.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Liu X, Liu L, Zhang Y et al (2008) The testing and analyses for oil-gas-water flow pattern with super-high water-cut in horizontal gathering-transportation pipeline. J EngThermophys 29(7):1167–1170
Qian Y, Yang L (2009) Research advances in oil-water two-phase flow. Chem Ind Eng Prog 28(4):566–573
Lv Y, He L, Wang A et al (2011) Study on the inverse characteristics of oil-water two-phase dispersed flow in horizontal tubes. J Petrochemical Univ 24(6):79–83
Chen Y, Tang L, Wang X (2007) Study on ultimate temperature in low temperature transportation of water cut oil. Offshore Oil 27(4):60–63
Liu X, Mao Q, Liu L et al (2013) Testing research for oil-gas-water flow pattern in Daqing oilfield. American Institute of Physics, pp 492–495
Liu X, Liu L et al (2009) Study on safe mixed temperature limits of Daqing periphery oilfield. Sci Technol Eng 9(20):6163–6166
Liu X (2005) The limit confirming and hydraulic/thermodynamic calculation method research for oil-gas-water mixing transportation safe in pipeline during oil producing with supper high water cut. Northeast Petroleum University, Daqing
Guo JH (2005) Temperature limit for oil-gas-water mixed transportation in safety during oil production with special high water-cut. Northeast Petroleum University, Daqing
Dong’en Tian (2015) Study on wall sticking rules of crude oil at high water cut stage in West Oilfield. Sci Technol Eng 15(9):176–179
Zheng H, Huang Q, Wang C et al (2015) Wall sticking of high water-cut, highly viscous and high gel-point crude oil transported at low temperatures. China Petrol Process Petrochem Technol 17(4):20–29
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Hu, Xy. et al. (2019). Experimental Study on Wall Sticking Occurrence Temperatures of High Water Cut Crude Oil Gathered and Transported at Normal Temperatures. In: Shemwell, S., Lin, J. (eds) Proceedings of the International Petroleum and Petrochemical Technology Conference 2018. IPPTC 2018. Springer, Singapore. https://doi.org/10.1007/978-981-13-2173-3_12
Download citation
DOI: https://doi.org/10.1007/978-981-13-2173-3_12
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-2172-6
Online ISBN: 978-981-13-2173-3
eBook Packages: EnergyEnergy (R0)