Abstract
The Serial equivalent model (SEM) of short-primary linear induction motor (SLIM) was established. Impedance parameters was theoretical analyzed, and primary input frequency, current, power, thrust, factor-efficiency were iteratively calculated. The overall performance of SLIM was evaluated according to given top indicators. Two-dimensional and three-dimensional finite element analysis (FEA) were carried out, and the results were compared to the actual application tests to verify the consistency of design and real get.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Liu Y, Yang Y (2003) Linear motor driving metro vehicle—a new mode for urban mass transit. Electr Locomotives Mass Transit Veh 26(4):4–7 (in Chinese)
Fang Y, Li G, Lv G (2006) Linear motor and its application in urban rail transit. Urban Rapid Rail Transit 19(1):1–6 (in Chinese)
Yan L (2008) Development and application of the maglev transportation system. IEEE Trans Appl Supercond 18(2):92–98
Liu S, Chang W, Yin L (1997) The running experiment description of Japan maglev train HSST-100. Electr Drive Locomotive 6:29–31 (in Chinese)
Long X (2006) The theoretical analysis and electromagnetic design of linear induction motor. Science Press, Beijing, pp 103–104 (in Chinese)
Alfredo MG, Thomas AL, Donald WN (1998) A new induction motor V/f control method capable of high-performance regulation at low speeds. IEEE Trans Ind Appl 34(4):813–821
Deng J, Chen T, Tang J et al (2013) Optimum slip frequency control of maglev single-sided linear induction motors to maximum dynamic thrust. Proc CSEE 33(12):123–130 (in Chinese)
Yang T, Zhou L, Li L (2008) Finite element analysis of linear induction motor for transportation systems. In: IEEE vehicle power and propulsion conference (VPPC 2008). IEEE, Harbin, pp 1–4
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Deng, J., Peng, Q., Chen, T., Tong, L. (2018). The Key Design and Control of Single-Sided Linear Induction Motors (SLIMs) Based on Serial Equivalent Model (SEM). In: Jia, L., Qin, Y., Suo, J., Feng, J., Diao, L., An, M. (eds) Proceedings of the 3rd International Conference on Electrical and Information Technologies for Rail Transportation (EITRT) 2017. EITRT 2017. Lecture Notes in Electrical Engineering, vol 482. Springer, Singapore. https://doi.org/10.1007/978-981-10-7986-3_47
Download citation
DOI: https://doi.org/10.1007/978-981-10-7986-3_47
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-7985-6
Online ISBN: 978-981-10-7986-3
eBook Packages: EnergyEnergy (R0)