Abstract
At present, some traditional and digital printing methods are used in electronic printing technology. But it is inconvenient in making one experiment in laboratory. So a kind of extrusion painting test device is designed, used for special printing objects of line pattern. This paper analyzed the working principle of extrusion painting test device, designed 2D motion system of extrusion painting head. The motion system is controlled on Arduino control panel. The extrusion painting head has the function of preheating and self-cleaning. The workbench integrates heating and drying functions. The device is used for the study of electronic ink 2D planar painting technology and relevant properties.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Zhang X (2014) Paper batteries and printed electronics. Mater China 33:186–188
Guan J, Cheng D, Shen X, Yu Z (2010) Electrode modification research of organic solar cell. Electron Packag (10):38–43
Lv X (2012) Novel pressure sensor for electronic skin. PhD thesis, Donghua University, Shanghai, China
Park SK, Kim YH, Han JI (2009) High-resolution patterned nanoparticulate ag electrodes toward all printed organic thin film transistors. Org Electron 10(6):1102–1108
Mahajan A, Frisbie CD, Francis LF (2013) Optimization of aerosol jet printing for high-resolution, high-aspect ratio silver lines. ACS Appl Mater Interfaces 5(11):4856–4864
Kelley TW, Baude PF, Gerlach C et al (2004) Recent progress in organic electronics: materials, devices, and processes. Chem Mater 16(23):4413–4422
Founder studio (2015) Rumba main control board. https://www.ifmy.net. Accessed 21 Apr 2017
RepRap (2017) https://reprap.org/wiki/RUMBA. Accessed 21 Apr 2017
Zhao C (2009) The design and implementation of 3D printer layered software. Thesis, Dongnan University. 20090401
Acknowledgements
This work was Supported by the National Key Scientific Instrument and Equipment Development Project (NO. 2013YQ140517). The work was also supported by Institute Level Key Projects Funded by Beijing Institute of Graphic Communication, under grant E-a-2013-18 and E-a-2014-14.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Gao, B., Zhang, X., Xu, W. (2018). Design of an Extrusion Painting Test Device with Preheating and Self-cleaning. In: Zhao, P., Ouyang, Y., Xu, M., Yang, L., Ren, Y. (eds) Applied Sciences in Graphic Communication and Packaging. Lecture Notes in Electrical Engineering, vol 477. Springer, Singapore. https://doi.org/10.1007/978-981-10-7629-9_70
Download citation
DOI: https://doi.org/10.1007/978-981-10-7629-9_70
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-7628-2
Online ISBN: 978-981-10-7629-9
eBook Packages: EngineeringEngineering (R0)