Skip to main content

Intensification of Bio-oil Yield from Waste Banana Pseudo-Stems—Experimental Studies on Catalytic Pyrolysis

  • Conference paper
  • First Online:
Waste Management and Resource Efficiency

Abstract

Regular generation of huge amount of solid wastes from various origin and the difficulties in obtaining a feasible management measure is a persisting problem faced by the societies of all countries. Thermochemical conversion, particularly through pyrolysis, of the abundant solid wastes to renewable energy resources and other value-added products is a sensible solution of this problem which can be adapted globally. In the present research work, non-edible parts of waste pseudo-stems of banana (Musa sp.) have been selected as the lignocellulosic feedstock for pyrolysis and its conversion to bio-oil, pyro-char and pyro-gas has been studied using temperature as a parameter. Initially, pyrolysis of raw and untreated banana pseudo-stems (BPS) has been conducted in a 50-mm-diameter and 164-mm-long semi-batch pyrolyzer under non-isothermal conditions in the temperature range of 673–1173 K. Five metal-based catalysts namely alumina, zinc oxide, sodium chloride, potassium chloride, and sodium aluminosilicate have been used to comparatively assess the enhancing effect of the catalysts on the product yields, particularly on the bio-oil yield. Pattern of the yields of bio-oil from non-catalytic and catalytic pyrolysis under same temperature range has been compared. Among the five catalysts, maximum bio-oil yield of 50 wt% at 873 K was obtained using potassium chloride (KCl). Hence, KCl is the best performing catalyst among all the other catalysts for bio-oil production using BPS. The lumped kinetic parameters for both non-catalytic and catalytic pyrolysis of BPS have been determined in the temperature range of 673–1173 K. The kinetics indicated that the weight loss increases with the increase in pyrolysis temperature due to the increased rate of pyrolysis for all experimental runs. Based on the current experimental findings, it has been recommended that lignocellulosic solid wastes can serve as excellent feedstocks for enhanced production of bio-oil through catalytic pyrolysis.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Chapter
USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD 169.00
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book
USD 219.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info
Hardcover Book
USD 219.99
Price excludes VAT (USA)
  • Durable hardcover edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

References

  1. Duku, M. H., Gu, S., & Hagan, E. B. (2011). A comprehensive review of biomass resources and biofuels potential in Ghana. Renew Sustainable Energy Review, 15(1), 404–415.

    Article  Google Scholar 

  2. Hadar, Y. (2013). Sources for lignocellulosic raw materials for the production of ethanol. In Lignocellulose Conversion, Springer, Berlin Heidelberg. https://doi.org/10.1007/978-3-642-37861-4_2.

  3. Canabarro, N., Soares, J. F., Anchieta, C. G., Kelling, C. S., & Mazutti, M. A. (2013). Thermochemical processes for biofuels production from biomass. Sustainable Chemical Processes, 1, 22.

    Article  Google Scholar 

  4. Chowdhury, R., Chakravarty, M., & Bhattacharya, P. (1991). Modeling and simulation of an updraft moving bed gasifier using rice husk as a fuel material. International Journal of Energy Research, 15(7), 593–602.

    Article  CAS  Google Scholar 

  5. Chowdhury, R., Bhattacharya, P., & Chakravarty, M. (1994). Modelling and simulation of a downdraft rice husk gasifier. International Journal of Energy Research, 18(6), 581–594.

    Article  CAS  Google Scholar 

  6. Bandyopadhyay, S., Chowdhury, R., & Biswas, G. K. (1996). Transient behaviour of coconut shell pyrolysis: A mathematical analysis. Industrial Engineering Chemistry Research, 35(10), 3347–3355.

    Article  CAS  Google Scholar 

  7. Bandyopadhyay, S., Chowdhury, R., & Biswas, G. K. (1999). Thermal deactivation studies of coconut shell pyrolysis. Canadian Journal Chemical Engineering, 77(5), 1028–1036.

    Article  CAS  Google Scholar 

  8. Ray, R., Bhattacharya, P., & Chowdhury, R. (2004). Simulation and modeling of vegetable market wastes pyrolysis under progressive deactivation condition. Canadian Journal Chemical Engineering, 82(3), 566–579.

    Article  CAS  Google Scholar 

  9. Ray, R., Bhattacharya, P., & Chowdhury, R. (2005). Studies on pyrolysis of vegetable market wastes in presence of heat transfer resistance and deactivation. International Journal of Energy Research, 29(9), 811–828.

    Article  CAS  Google Scholar 

  10. Sarkar, A., Dutta, S., & Chowdhury, R. (2013). Mustard press cake pyrolysis and product yield characterization. International Journal of Scientific and Engineering Research 4(8). ISSN 2229-5518.

    Google Scholar 

  11. Sarkar, A., Mondal, B., & Chowdhury, R. (2014). Mathematical modeling of a semibatch pyrolyser for sesame oil cake. Industrial Engineering Chemistry Research, 53(51), 19671–19680.

    Article  CAS  Google Scholar 

  12. Sarkar, A., & Chowdhury, R. (2016). Co-pyrolysis of paper waste and mustard press cake in a semi-batch pyrolyzer—optimization and bio-oil characterization. International Journal of Green Energy, 13(4), 373–382.

    Article  CAS  Google Scholar 

  13. Poddar, S., De, S., & Chowdhury, R. (2015). Catalytic pyrolysis of lignocellulosic bio-packaging (jute) waste-kinetics using lumped and DAE (distributed activation energy) models and pyro-oil characterization. RSC Advances, 5(120), 98934–98945.

    Article  CAS  Google Scholar 

  14. Yang, H. M., Appari, S., Kudo, S., Hayashi, J., & Norinaga, K. (2015). Detailed chemical kinetic modeling of vapor-phase reactions of volatiles derived from fast pyrolysis of lignin. Industrial and Engineering Chemistry Research, 54(27), 6855–6864.

    Article  CAS  Google Scholar 

  15. Hoekstra, E., Westerhof, R. J. M., & Brilman, W. (2012). Heterogeneous and homogeneous reactions of pyrolysis vapors from pine wood. AIChE Journal, 58(9), 2830–2842.

    Article  CAS  Google Scholar 

  16. Sarkar, A., Mondal, B., & Chowdhury, R. (2014). Mathematical modeling of a semibatch pyrolyser for sesame oil cake. Industrial and Engineering Chemistry Research, 53, 19671–19680.

    Article  CAS  Google Scholar 

  17. Manocha, S., Bhagat, J. H., & Manocha, L. M. (2001). Studies on pyrolysis behaviour of banana stem as precursor for porous carbons. Carbon Sci, 2(2), 91–98.

    Google Scholar 

  18. Fernandes, E. R. K., Marangoni, C., Medeiros, S.H.W., Souza, O., & Sellin, N. (2012). Slow pyrolysis of banana culture waste: Leaves and pseudostem. In 3rd International Conference on Industrial and Hazardous Waste Management.

    Google Scholar 

Download references

Acknowledgements

The first author gratefully acknowledges the financial assistance provided by Technical Education Quality Improvement Program (TEQIP, Phase II) for the research studies.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Ranjana Chowdhury .

Editor information

Editors and Affiliations

Rights and permissions

Reprints and permissions

Copyright information

© 2019 Springer Nature Singapore Pte Ltd.

About this paper

Check for updates. Verify currency and authenticity via CrossMark

Cite this paper

Das, S., Ghosh, S., Chowdhury, R. (2019). Intensification of Bio-oil Yield from Waste Banana Pseudo-Stems—Experimental Studies on Catalytic Pyrolysis. In: Ghosh, S. (eds) Waste Management and Resource Efficiency. Springer, Singapore. https://doi.org/10.1007/978-981-10-7290-1_63

Download citation

Publish with us

Policies and ethics