Abstract
The advent of roll-to-roll (R2R) manufacturing is a significant breakthrough as a high-throughput and low-cost technology for continuous fabrication of functional substrate film for various applications, especially for mass production of printed electronics and functional optical film. Structured roller mold utilized in R2R manufacturing is the essential component, which transfers the micro-feature or pattern from the mold onto the polymer film. It requires high-profile accuracy, excellent surface quality, and consistent feature uniformity; hence it is usually fabricated by micromachining technologies. This chapter emphasizes on micromachining of roller mold for R2R manufacturing process, and fabrication technology of two major types of roller mold are mainly discussed: gravure roller mold and embossing roller mold. Recent advances in micromachining of these two types of roller mold is addressed, particularly on novel machining process invented for enhanced film performance and complex micro-features generation. Measurement and characterization of both the machined roller and R2R manufactured film are also discussed in detail.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Allen RC et al (2000) Brightness enhancement film. US Patent
Brinksmeier E, Preuss W (2012) Micro-machining. Phil Trans R Soc A 370(1973):3973–3992. https://doi.org/10.1098/rsta.2011.0056
Donaldson R, Patterson S (1983) Design and construction of a large, vertical axis diamond turning machine. In: 27th annual techincal symposium, 1983. International Society for Optics and Photonics, pp 62–67
Hennig G, Selbmann KH, Brüning S (2008) Large scale laser microstructuring in the printing industry. Laser Technik J 5:52–56
Hrehorova E, Kattumenu R-C (2007) Evaluation of gravure print forms for printed electronics. Gravurezine
Hrehorova E, Rebros M, Pekarovicova A, Bazuin B, Ranganathan A, Garner S, Merz G, Tosch J, Boudreau R (2011) Gravure printing of conductive inks on glass substrates for applications in printed electronics. Display Technol J 7:318–324
Huang R, Zhang X, Rahman M, Kumar AS, Liu K (2015) Ultra-precision machining of radial Fresnel lens on roller moulds. CIRP Ann 64:121–124. https://doi.org/10.1016/j.cirp.2015.04.062
Huang R, Zhang X, Kumar AS, Liu K, Rahman M (2017) Profile evaluation of radial Fresnel lens directly machined on roller molds by rotating-tool diamond turning. Precis Eng 50:44–52. https://doi.org/10.1016/j.precisioneng.2017.04.012
Kang H, Kitsomboonloha R, Jang J, Subramanian V (2012) High-performance printed transistors realized using Femtoliter gravure-printed Sub-10 μm metallic nanoparticle patterns and highly uniform polymer dielectric and semiconductor layers. Adv Mater 24:3065–3069
Kitsomboonloha R, Morris S, Rong X, Subramanian V (2012) Femtoliter-scale patterning by high-speed, highly scaled inverse gravure printing. Langmuir 28:16711–16723
Lahti M, Leppävuori S, Lantto V (1999) Gravure-offset-printing technique for the fabrication of solid films. Appl Surf Sci 142:367–370. https://doi.org/10.1016/S0169-4332(98)00676-X
Pudas M, Halonen N, Granat P, Vähäkangas J (2005) Gravure printing of conductive particulate polymer inks on flexible substrates. Prog Org Coat 54:310–316. https://doi.org/10.1016/j.porgcoat.2005.07.008
Sung D, Vornbrock AF, Subramanian V (2010) Scaling and optimization of gravure-printed silver nanoparticle lines for printed electronics components and packaging technologies. IEEE Trans Compon Packag Technol 33:105–114. https://doi.org/10.1109/TCAPT.2009.2021464
Watts MP, Solutions I (2007) Advances in roll to roll processing. Impattern solutions. Austin. http://www.impattern.com/Download/RollToRollProcessing.pdf
Xie W, Dai Y, Wang R, Sumathy K (2011) Concentrated solar energy applications using Fresnel lenses: a review. Renew Sust Energ Rev 15:2588–2606
Zhang XQ, Woon KS, Rahman M (2014) Diamond turning. In: Hashmi S, Batalha GF, Tyne CJV, Yilbas B (eds) Comprehensive materials processing, vol 11. Elsevier, Oxford, pp 201–220. https://doi.org/10.1016/B978-0-08-096532-1.01110-9
Zhang X, Liu K, Sunappan V, Shan X (2015) Diamond micro engraving of gravure roller mould for roll-to-roll printing of fine line electronics. J Mater Process Technol 225:337–346. https://doi.org/10.1016/j.jmatprotec.2015.05.032
Zhang X, Huang R, Liu K, Kumar AS, Shan X (2018) Rotating-tool diamond turning of Fresnel lenses on a roller mold for manufacturing of functional optical film. Precis Eng 51:445–457. https://doi.org/10.1016/j.precisioneng.2017.09.016
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer Nature Singapore Pte Ltd.
About this entry
Cite this entry
Huang, R., Zhang, X., Liu, K. (2018). Micromachining of Roller Mold for Roll-to-Roll Manufacturing. In: Yan, J. (eds) Micro and Nano Fabrication Technology. Micro/Nano Technologies, vol 1. Springer, Singapore. https://doi.org/10.1007/978-981-10-6588-0_6-1
Download citation
DOI: https://doi.org/10.1007/978-981-10-6588-0_6-1
Received:
Accepted:
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-6588-0
Online ISBN: 978-981-10-6588-0
eBook Packages: Springer Reference EngineeringReference Module Computer Science and Engineering
Publish with us
Chapter history
-
Latest
Micromachining of Roller Mold for Roll-to-Roll Manufacturing- Published:
- 18 April 2018
DOI: https://doi.org/10.1007/978-981-10-6588-0_6-2
-
Original
Micromachining of Roller Mold for Roll-to-Roll Manufacturing- Published:
- 08 February 2018
DOI: https://doi.org/10.1007/978-981-10-6588-0_6-1