Abstract
According to the meshing principle of elliptical gear, focusing on the design of elliptical gear tooth profile, an example is given to elaborate the design process of elliptical gear detailedly. The eccentricity of elliptical gear and the radius of curvature radius are obtained by the compiled program as well as the pitch curves and tooth profile are generated in the electronic drawing board by using the conversion method of tooth profile. Finally the 3D model of elliptical gear is carried out and motion characteristics is analyzed. The design method proposed can be used to provide the basis for the design of other non-circular gear with closed pitch curve.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Hu C, Yao H. The parametric design research of non-circular gear based on MATLAB and Pro/E. J Mech Trans. 2010; 34(7): 33–5.
Chen J, Fan L. The design of elliptical gear based on Pro/E and MATLAB. J Soochow Univ. 2012;32(4):60–5.
Wang P, Liu Y, He G. Drawing of enclosed non-circular gear tooth profile based on conversion method of tooth profile. J Mech Trans. 2014; 38(8):74–6.
Wu X, Wang G. Non-circular gear and non-uniform speed transmission. Beijing: China Machine Press; 1997.
Jiang Y, Tian F, Chibing H. Development of system of parametric design and motion simulation of elliptical gear. J Eng Graph. 2011;3:13–6.
Zhou Y, Zhu S. Study on 3D modeling and kinematics simulating of involute elliptic gear based on CAXA and Pro/E. J Eng Graph. 2009;3:207–11.
Shi Y, Wang S. Research on numerical algorithm of non-circular gear’s tooth profile. Mech Sci Technol. 2013;32(8):1130–3.
Liu Y, Yang C, Sun X. Kinematics stimulation analysis of non-circular gear based on ADAMS. J Mech Trans. 2014;38(6):106–9.
Acknowledgements
This project is supported by National Natural Science Foundation of China (Grant No. 51265023).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Liu, Y., Dong, C., Wang, X., An, J., Feng, Y. (2018). Parametric Design and Motion Characteristics Analysis of Elliptical Gear. In: Tan, J., Gao, F., Xiang, C. (eds) Advances in Mechanical Design. ICMD 2017. Mechanisms and Machine Science, vol 55. Springer, Singapore. https://doi.org/10.1007/978-981-10-6553-8_18
Download citation
DOI: https://doi.org/10.1007/978-981-10-6553-8_18
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-6552-1
Online ISBN: 978-981-10-6553-8
eBook Packages: EngineeringEngineering (R0)