Abstract
The term advanced composite materials is given to an innovative range of materials that were developed toward the end of the 1960s.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Shen Z (1995) design guideline of durability/damage tolerance for composite aircraft structures. Aviation Industry Publisher, Beijing
Shen Z (2001) Design Handbook for Composite Structures. Aviation Industry Publisher, Beijing
U.S. Department of Defense (2002) MIL-HDBK-17F. Composite material handbook, vol 3. Polymer matrix composites materials usage, design, and analysis
Briston JW (1986) Airworthiness of composite structures—some experiences from civil certification. In: Proceedings of the 2nd international conference on fiber reinforced composites
Soderquist JR (1987) Design/certification considerations in civil composite aircraft structure. SAE 871846
Brandecker B, Hilgert RS (1988) A320 full scale structural testing for fatigue and damage tolerance certification of metallic and composite structure. In: Proceedings of the 16th ICAS
Shen Z (1988) The design allowables of composite aircraft structures and their determination principle. Acta Aeronautica Et Astronautica Sinica 19(4):385–392
Jones RM (1981) (trans: Zhu YL) Mechanics of composite materials. Science and Technology of Shanghai Publisher, Shanghai
Zhou L, Fan FQ (1991) Mechanics of composite materials. Higher Education Press, Beijing
Zhu YL (1979) Review on mechanical properties of advanced composites. glass-fiber reinforced plastics. GFRP Structures Research Institute of Shanghai
Yang NB, Zhang YN (2002) Composite aircraft structure design. Aviation Industry Publisher, Beijing
Jiang YQ, Lu FS, Gu ZS (1990) Mechanics of composite materials. Xi’an Jiaotong University Press, Xi’an
Chen SJ (1990) Design handbook of composite materials. Aviation Industry Publisher, Beijing
Tong XX (2002) Guideline of stability analysis for composite structures. Aviation Industry Press, Beijing
Niu MC (1992) Composite aircraft structures. Cinmilit Press Ltd, Hong Kong
Zhu JF, Wang H (1996). Analysis code of post-buckling strength and failure for composite stiffened panel and shell structures (COMPOSS). Comput Struct Mech Its Appl 13(4)
Xie MJ (1995) Handbook for composite joints. Aviation Industry Press, Beijing
ASM International Handbook Committee (1987) Engineered materials handbook, vol 1. Composites
Hart-Smith LJ (1973) Adhesive bonded single lap joints. NASA CR-112236
Hart-Smith LJ (1973) Adhesive bonded double lap joints. NASA-CR-112235
Hart-Smith LJ (1973) Adhesive bonded scarf and stepped lap joints. NASA CR-112237
Hart-Smith LJ (1982) Design methodology for bonded-bolted composite joints. AD-A117342 (AFWAL TR 81-3154)
Collings TA (1977) The strength of bolted joints in multidirectional CFRP laminates. ARC CP 1380
Garbo SP, Ogonowski JM (1981) Effect of variance and manufacturing tolerances on the design strength and life of mechanically fastened composite joints. AD- A101657
Chi J, Xie MJ (1988) FE analysis investigation on bolt-load distribution in composite laminate joints. Acta Aeronautica Et Astro- Nautica Sinica 19(7) (in Chinese)
Hart-Smith LJ (1976) Bolted joints in graphite composites. NASA-TR-144899
Hart-Smith LJ (1978) Mechanically fastened joints for advanced composite-phenomenological consideration and simple analysis. In: Presented to the conference on fibrous composites in structure design
Bunin BL (1985) Critical joints in large composite primary aircraft structures. NASA-CR-3914 Vol. I — Technical summary
Bunin BL (1985) Critical joints in large composite primary aircraft structures vol II — Technology demonstration test report. NASA-CR-172587
Bunin BL, Sagui RL (1985) Critical joints in large composite primary aircraft structures vol III—Ancillary data test results. NASA-CR-172588
Nelson WD, Bunin BL, Hart-Smith LJ (1983) Critical joints in large composite primary aircraft structures. NASA-CR-3710
Hortin RE, McCarty JE (1987) Damage tolerance of composites. In: Engineered materials handbook Vol.1 Composites. ASM International, Ohio, USA, pp 259–267
Tang XD, Shen Z, Chen PH, Gaedke M (1997). A methodology for residual strength of damaged laminated composites. AIAA Paper 97–1220
Chen PH (1999). Damage tolerance analysis for composite laminates and stiffened panel. PhD thesis of Nanjing Aeronautical and Astronautical University
Chen PH, Shen Z, Wang JY (2001) Damage tolerance analysis of cracked stiffened composite panels. J Compos Mater 35(20)
Chen PH, Shen Z, Wang JY (2001). Impact damage tolerance analysis of stiffened composite panels. J Compos Mater 35(20)
Chen PH, Shen Z, Wang JY (2001) Prediction of the strength of notched composite laminates. Compos Sci Technol 61(10)
Chen PH, Shen Z, Wang JY (2002) A new method for compression after impact strength prediction of composite laminates. J Compos Mater 36(5)
ASTM D 3878-07 (2004) Standard terminology for composite materials
ACEE Composites Project Office (1985) NASA/Aircraft industry standard specification for graphite fiber/toughened thermoset resin composite material. NASA RP 1142
SACMA 2R-94 (1994) SACMA recommended test method for compression after impact of oriented fiber-resin composites
Dost EF, Avery WB, Finn LB, Ilcewicz LB, Scholz DB, Wishart RE (1993) Impact damage resistance of composite fuselage structure, Part 3. In: Paper presented at fourth ACT conference
Shen Z, Zhang ZL, Wang J, Yang SC, Ye L (2004) Characterization on damage resistance and damage tolerance behavior of composite laminates. Acta Materiae Composite Sinica 21(5):140–145 (in Chinese)
Chen PH, Shen Z et al (2006) Failure mechanisms of laminated composites subjected to static indentation. J Compos Struct 75(1–4):486–495
Shen Z, Yang SC, Chen PH (2008) Experimental study on the behavior and characterization methods of composite laminates to withstand impact. Acta Materiae Composite Sinica 25(5):125–133 (in Chinese)
Li Y (1998). Effect of hygrothermal spectrum aging on composite laminates. NCCM-10. Hunan Science and Technology Press, Changsha, pp 143–146
Kan HP, Whitehead RS, Kauts E (1992). Damage tolerance certification methodology for composite structures, N92-32579
Bai G (1997). Reliability evaluation of composite laminates under impact threat. MSC thesis of Northwestern Polytechnical University
Ma ZK, Yang L (1998) Analysis method of cumulative damage tolerance reliability for composite laminated structures. Design and Research of Commercial Aircraft
Chen PH, Shen Z (2004). Statistical analysis and reliability evaluation of post- impact compressive residual strength. Acta Aeronautica Et Astronautica Sinica 25(6)
Tong MB, Chen P H, Shen Z (2004). Reliability analysis of impact damage tolerance for composite materials. Acta Materiae Composite Sinica, 21(6)
JSSG-2006 (1998) Joint service specification guide—Aircraft structures
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Chemical Industry Press, Beijing and Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Shen, Z., Tong, X., Yang, N., Xie, M., Li, Y., Chen, P. (2018). Composite Structure Design and Analysis. In: Yi, XS., Du, S., Zhang, L. (eds) Composite Materials Engineering, Volume 1. Springer, Singapore. https://doi.org/10.1007/978-981-10-5696-3_4
Download citation
DOI: https://doi.org/10.1007/978-981-10-5696-3_4
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-5695-6
Online ISBN: 978-981-10-5696-3
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)