Abstract
Acoustical properties of nonwoven fabrics are measured using several different test methods. These important test methods measure physical, mechanical and acoustic properties, which are important for the evaluation, characterization and differentiation of nonwoven fabrics for acoustical applications. Even the basic physical properties of nonwovens play a very important role in acoustics. Physical, mechanical and acoustical properties of nonwoven fabrics are measured using several standards that are defined in ASTM, ISO, ANSI and SAE test standards. Some other measurement techniques that are not included in any standard test methods can also be found in literature. In this chapter, important standard or nonstandard test methods related to acoustical properties of nonwoven fabrics are explained and described. Important physical properties of nonwoven fabrics for acoustical applications are areal density (mass), volumetric density, porosity, particle size distribution, tortuosity and thickness. Density parameters are the most important parameters for the differentiation of the nonwoven fabrics. Porosity also plays a major role in acoustical properties because each pore in the fabric becomes an absorptive material for the sound waves during sound wave–nonwoven fabric interaction. Mechanical parameters that are related to acoustical properties of nonwoven fabric are tensile properties and Young’s modulus. Acoustical absorption properties of nonwoven fabrics are determined using sound absorption coefficient, sound transmission loss, noise reduction coefficient, sound impedance and airflow resistivity parameters. These parameters could be measured using many different test methods. These methods are explained and related ASTM, ISO, ANSI and SAE test standards are discussed in this chapter. Especially impedance tubes and reverberation rooms are used for most of the acoustical test methods discussed in this chapter.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Glé et al (2011) Acoustical properties of materials made of vegetable particles with several scales of porosity. Appl Acoust 249–259
Nayak R, Punj S, Chatterjee K, Behera B (2009) Comfort properties of suiting fabrics. Indian J Fibre Text Res 34:122–128
Gerges SNY, Balvedi AM (1999) Numerical simulation and experimental tests of multilayer systems with porous materials. Appl Acoust 58:403–418
Nayak R, Padhye R (2015) Garment manufacturing technology. Elsevier, Amsterdam, pp 59–80
Ford RD (1970) Introduction to acoustics. Elseiver Publishing, New York
Conrad J, Jr Hemond (1983) Engineering acoustics and control. Prentice Hall Inc., New Jersey
Reynolds DD (1981) ‘Engineering principles of acoustics’, noise and vibration control. Allyn and Bacon Inc., Boston
Tascan M, Vaughn EA (2008) Effects of fiber denier, fiber cross-sectional shape and fabric density on acoustical behavior of vertically lapped nonwoven fabrics. J Eng Fibers Fabr 3(2):32–38
Standard Test Method for Measurement of Normal Incidence Sound Transmission of Acoustical Materials Based on the Transfer Matrix Method, ASTM 2611-09, American Society of Testing and Materials. http://www.astm.org/Standards/E2611.htm, 12 Jan 2016
Acoustics—measurement of sound insulation in buildings and of building elements—Part 14: guidelines for special situations in the field, ISO 140-14:2004, International Organization for Standardization. http://www.iso.org/iso/catalogue_detail.htm?csnumber=31756, 15 Jan 2016
Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine. ASTM E492-09, American Society of Testing and Materials. http://www.astm.org/Standards/E492.htm, 12 Jan 2016
Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings, ASTM E336-16, American Society of Testing and Materials. http://www.astm.org/Standards/E336.htm, 16 Jan 2016
Laboratory Measurement of the Airborne Sound Barrier Performance of Flat Materials and Assemblies. SAE J1400, Society of Automotive Engineers International. http://standards.sae.org/j1400_201008/, 15 Jan 2016
Standard Test Method for Laboratory Measurements of Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers, ASTM E477-13e1, American Society of Testing and Materials. http://www.astm.org/Standards/E477.htm, 17 Jan 2016
Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum, ASTM E1414, American Society of Testing and Materials. http://www.astm.org/Standards/E1414.htm, 17 Jan 2016
Acoustics—field measurement of sound insulation in buildings and of building elements—Part 2: impact sound insulation, ISO 16283-2:2015, International Organization for Standardization. http://www.iso.org/iso/iso_catalogue/catalogue_tc/catalogue_detail.htm?csnumber=59747, 17 Jan 2016
Tannenbaum B, Stillman M (1973) Understanding sound. McGraw-Hill Book, Company, New York
Octave-band and Fractional-octave-band Filters—Part 1: specifications (a nationally adopted international standard), ANSI/ASA S1.11 PART 1, American National Standard Electroacoustics. https://global.ihs.com/doc_detail.cfm?&item_s_key=00009495, 17 Jan 2016
Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures, ASTM E596-96(2009), American Society of Testing and Materials. http://www.astm.org/Standards/E596.htm, 18 Jan 2016
Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method, ASTM C423-09a. Reapproved in 2009, American Society of Testing and Materials. http://www.astm.org/Standards/C423.htm, 10 Jan 2016
‘What is NRC, STC and SAA?’ http://acoustical.com/what-is-nrc-stc-saa/, 02 Jan 2016
Acoustics—sound absorbers for use in buildings—rating of sound absorption, ISO 11654:1997, International Organization for Standardization. http://www.iso.org/iso/catalogue_detail.htm?csnumber=19583, 13 Jan 2016
Tascan M (2015) Acoustical properties of fiber network structures. Doctoral thesis, Clemson University (May)
Kinsler L, Frey A, Coppens A, Sanders J (2000) Fundamentals of acoustics. Wiley, New York. ISBN 0-471-84789-5
Standard Test Method for Impedance and Absorption of Acoustical Materials by the Impedance Tube Method, ASTM C 384-98, 1998, American Society of Testing and Materials. http://www.astm.org/Standards/C384.htm, 08 Jan 2016
Braccesi C, Bracciali A (1998) Least squares estimation of main properties of sound absorbing materials through acoustical measurements. Appl Acoust 54(1):59–70
Kundt A (January–June 1868). Acoustic experiments. The London, Edinburgh and Dublin Philosophical Magazine and Journal of Science (vol 35, no.4). Taylor & Francis, UK, pp 41–48. Retrieved 2009-06-25
Poynting JH, Thomson JJ (1903) A textbook of physics: sound, 3rd edn. Charles Griffin & Co., London, pp 115–117
Faber TE (1995) Fluid dynamics for physicists. Cambridge University Press, UK, p 287. ISBN 0-521-42969-2
Conrad J, Hemond Jr (1983) Engineering acoustics and control. Prentice Hall Inc., New Jersey
Standard Test Method for Airflow Resistance of Acoustical Materials, ASTM C 522-87, American Society of Testing and Materials. Reapproved 1997. http://www.astm.org/Standards/C522.htm, 10 Jan 2016
Tascan M, Vaughn EA, Stevens KA, Brown PJB (2011) Effects of total surface area and fabric density on the acoustical behavior of traditional thermal-bonded highloft nonwoven fabrics. J Text Inst 102(9):746–751
Tascan M, Vaughn EA (2008) Effects of fiber specific surface and fabric density on the acoustical behavior of needle punched nonwoven fabrics. Text Res J 78:289–296
Tascan M, Gaffney KL (2012) Effect of glass beads on sound insulation properties of nonwoven fabrics. J Eng Fibers Fabr 7(1):101–105
Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements, ASTM E90-09, American Society of Testing and Materials. http://www.astm.org/Standards/E90.htm, 12 Jan 2016
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer Science+Business Media Singapore
About this chapter
Cite this chapter
Taşcan, M. (2016). Acoustical Test Methods for Nonwoven Fabrics. In: Padhye, R., Nayak, R. (eds) Acoustic Textiles. Textile Science and Clothing Technology. Springer, Singapore. https://doi.org/10.1007/978-981-10-1476-5_6
Download citation
DOI: https://doi.org/10.1007/978-981-10-1476-5_6
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-1474-1
Online ISBN: 978-981-10-1476-5
eBook Packages: EngineeringEngineering (R0)