Abstract
A bench-scale apparatus producing the liquid droplets and a sweating manikin were used to study the heat and moisture transfer through the multilayer protective clothing system during the low-level radiation of 2.5 kW/m2. The results show the cooling effect of the absorbed liquid transfer and the heating effect of condensation at the bench-scale test. In addition, the wicking effect from sweating water with the stored thermal energy influences the heat transfer of the clothing system during the exposure and cooldown periods at the manikin test. Although the comparison of the bench- and full-scale tests with some differences during the moisture condition, both methods can be used to investigate heat and moisture transfer through protective ensemble exposed to and after ending the low-level thermal radiation.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Kim IY, Lee C, Li P, Corner BD, Paquette S (2002) Investigation of air gaps entrapped in protective clothing systems. Fire Mater 26:121–126
Hoschke BN (1981) Standards and specifications for firefighters’ clothing. Fire Saf J 4:125–137
Lee C, Kim IY, Wood A (2002) Investigation and correlation of manikin and bench-scale fire testing of clothing systems. Fire Mater 26:269–278
Stroup DW, McLane RA, Willey WH (2007) Full ensemble and bench scale testing of fire fighter protective clothing, National Institute of Standards and Technology Report NISTIR 7467, Gaithersburg, pp 1–75
Fu M, Weng WG, Yuan HY (2014) Thermal insulations of multilayer clothing systems measured by a bench scale test in low level heat exposures. Int J Cloth Sci Tech 26:412–423
Hes L, Araujo M (2010) Simulation of the effect of air gaps between the skin and a wet fabric on resulting cooling flow. Text Res J 80:1488–1497
Lu YH, Li J, Li XH, Song GW (2013) The effect of air gaps in moist protective clothing on protection from heat and flame. J Fire Sci 31:99–111
Fu M, Weng WG, Yuan HY (2014) Quantitative investigation of air gaps entrapped in multilayer thermal protective clothing in low level radiation at the moisture condition. Fire and Materials 26, published online, October 10, 2014, doi:10.1002/fam.2278
Fu M, Weng WG, Yuan HY (2014) Combined effects of moisture and radiation on thermal performance of protective clothing: experiments by a sweating manikin exposed to low level radiation. Int J Cloth Sci Tech (in press)
Psikuta A, Frackiewicz J, Frydrych I, Rossi R (2012) Quantitative evaluation of air gap thickness and contact area between body and garment. Text Res J 82:1405–1413
Mah T, Song GW (2010) Investigation of the contribution of garment design to thermal protection. Part 1: characterizing air gaps using three-dimensional body scanning for women’s protective clothing. Text Res J 80:1317–1329
Song GW, Paskaluk S, Sati R, Crown E, Dale J, Ackerman M (2011) Thermal protective performance of protective clothing used for low radiant heat protection. Text Res J 81:311–323
Fu M, Weng WG, Han XF (2013) Effects of moisture transfer and condensation in protective clothing based on thermal manikin experiment in fire environment. In: 9th Asia-Oceania symposium on Fire Science and Technology (AOSFST), 17–20 October, 2012, Hefei, China. Procedia Engineering 62, pp 760–768
Acknowledgment
This paper was supported by the National Natural Science Foundation of China (Grant No. 51076073), China National Key Basic Research Special Funds Project (Grant No. 2012CB719705), Tsinghua University Initiative Scientific Research Program (Grant No. 2012THZ02160), and Open Foundation of Hefei Institute for Public Safety Research, Tsinghua University.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer Science+Business Media Singapore
About this paper
Cite this paper
Fu, M., Weng, W., Yang, J., Zhang, Q. (2017). Comparison of Bench-Scale and Manikin Tests of Protective Clothing Systems During Low-Level Radiation. In: Harada, K., Matsuyama, K., Himoto, K., Nakamura, Y., Wakatsuki, K. (eds) Fire Science and Technology 2015. Springer, Singapore. https://doi.org/10.1007/978-981-10-0376-9_49
Download citation
DOI: https://doi.org/10.1007/978-981-10-0376-9_49
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-0375-2
Online ISBN: 978-981-10-0376-9
eBook Packages: EngineeringEngineering (R0)