Abstract
The tensile behavior of strain-hardening cement-based composites (SHCC) is usually investigated on macroscopic scale by means of direct tension tests or bending tests. Additionally, the micromechanical properties of the composites are often described based on single fiber tension and pull-out tests. Such investigations, performed both on macroscopic and microscopic scales, are based on ‘classical’ force and displacement measuring techniques. Advanced test methods such as digital image correlation (DIC) and acoustic emission analysis (AE) may facilitate the identification and the analysis of the failure mechanisms in SHCC, which is important for both monitoring loaded SHCC elements and further material development and optimization. In this study, these two techniques are combined to characterize the failure mechanisms of three different types of SHCC in direct tension tests. The results are related to data of stress and strain measurements. It is shown that DIC provides detailed spatially resolved and stress related strain measurements. Furthermore, it is demonstrated that AE allows for the localization of active cracks, quantification of the damage accumulation under increasing stresses, and characterization of the dominant crack bridging mechanisms and failure modes observed in the different types of SHCC.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Curosu, I., Mechtcherine, V., Millon, O.: Effect of fiber properties and matrix composition on the tensile behavior of strain-hardening cement-based composites (SHCCs) subjected to impact loading. Cem. Concr. Res. 82, 23–35 (2016)
Grosse, C.U., Ohtsu, M. (eds.): Acoustic Emission Testing. Springer, Berlin (2008). ISBN 978-3-540-69895-1
Kanda, T., Takaine, Y., Tomoe, S., Takahashi, M., Yamamoto, Y., Kawano, K., Kunieda, M., Mizobuchi, T.: Development of coupling beam elements utilizing UHP-SHCC for high-rise R/C building. In: Schlangen, E., Sierra Betran, M.G., Lukovik, M., Ye, G. (eds.) Proceedings of the 3rd RILEM Conference on Strain-Hardening Cementitious Composites, pp. 409–416 (2014)
Kunieda, M., Ueda, N., Nakamura, H., Tamakoshi, T.: Cyclic response of damaged members repaired by different types of SHCCs. In: Van Mier, J.G.M., Ruiz, H., Andrade, C., Yu, R.C., Zhang, X.X. (eds.) Proceedings of the VIIIth International Conference on Fracture of Concrete and Concrete Structures FraMCoS-8. Toledo, Spain (2013)
Kunieda, M., Rokugo, K.: Recent progress on HPFRCC in Japan. J. Adv. Concr. Technol. 4(1), 19–33 (2006)
Lepech, M.D., Li, V.C.: Application of ECC for bridge deck link slabs. Mater. Struct. 42, 1185–1195 (2009)
Li, V.C., Lepech, M.: Crack resistant concrete material for transportation construction. In: Transportation Research Board 83rd Annual Meeting, Washington, DC, compendium of papers. Paper 04-4680 (2004)
Li, V.C.: On engineered cementitious composites (ECC): a review of the material and its applications. J. Adv. Concr. Technol. 1(3), 215–230 (2003)
Li, V.C., Wu, H.C., Chan, Y.W.: Interface property tailoring for pseudo strain-hardening cementitious composites. In: Sih, G.C. et al. (eds.) Advanced Technology for Design and Fabrication of Composite Materials and Structures, pp. 261–268 (1995)
Mechtcherine, V.: Novel cement-based composites for the strengthening and repair of concrete structures. Constr. Build. Mater. 41, 365–373 (2013)
Paul, S.C., Pirskawetz, S., van Zijl, G.P.A.G., Schmidt, W.: Acoustic emission for characterizing the crack propagation in strain-hardening cement-based composites (SHCC). Cem. Concr. Res. 69, 19–24 (2015)
Sause, M.G.R., Müller, T., Horoschenkoff, A., Horn, S.: Quantification of failure mechanisms in mode-I loading of fiber reinforced plastics utilizing acoustic emission analysis. Compos. Sci. Technol. 72(2), 167–174 (2012)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 RILEM
About this paper
Cite this paper
Pirskawetz, S.M., Hüsken, G., Curosu, I., Mechtcherine, V. (2018). Combination of Digital Image Correlation and Acoustic Emission for Characterizing Failure Modes in Strain-Hardening Cement-Based Composites (SHCC). In: Mechtcherine, V., Slowik, V., Kabele, P. (eds) Strain-Hardening Cement-Based Composites. SHCC 2017. RILEM Bookseries, vol 15. Springer, Dordrecht. https://doi.org/10.1007/978-94-024-1194-2_35
Download citation
DOI: https://doi.org/10.1007/978-94-024-1194-2_35
Published:
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-024-1193-5
Online ISBN: 978-94-024-1194-2
eBook Packages: EngineeringEngineering (R0)