Abstract
The one-phase methods described in Chapter 2 were shown to be able to predict casting to some extent, but could not depict segregation, sedimentation and blockage occurring during flow. On the other hand, the distinct element methods described in Chapter 3 did not take into account the presence of two phases in the system and describes concrete as distinct elements interacting through more or less complex laws. A reliable numerical model of a multiphase material behaviour shall take into account both phases (solid and liquid). From the numerical point of view, concrete flow shall be seen therefore as the free surface flow of a highly-concentrated suspension of rigid grains.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
Sulsky, D., Schreyer, H.: Antisymmetric form of the material point method with applications to upsetting and Taylor impact problem. Comp. Meth. in Applied Mech. Eng. 139, 409–429 (1996)
Moresi, L., Dufour, F., Mühlhaus, H.B.: A Lagrangian integration point finite element method for large deformation modeling of viscoelastic geomaterials. J. of Comp. Phys. 184(2), 476–497 (2003)
Dufour, F., Pijaudier-Cabot, G.: Numerical modeling of concrete flow: homogeneous approach. Int. J. for Num. And Anal. Meth. in Geomechanics 29(4), 395–416 (2005)
Modigell, M., Vasilic, K., Brameshuber, W., Uebachs, S.: Modelling and Simulation of the Flow Behaviour of Self-Compacting Concrete. In: Schutter de, G., Boel, V. (eds.) 5th International RILEM Symposium on Self-Compacting Concrete, SCC 2007, Ghent, Belgium, September 3-5., vol. 1, pp. S.387–S.392. RILEM Publications, Bagneux (2007) ISBN 978-2-35158-050-9
Modigell, M., Hufschmidt, M., Petera, J.: Two-Phase Simulations as a Development Tool for Thixoforming. Processes Steel Research International 75(9), 513–518 (2004), Larson G.: The structure and rheology of complex fluids. Oxford University Press, New York (1999)
Hufschmidt, M., Modigell, M., Petera, J.: Modelling and simulation of forming processes of metallic suspensions under non-isothermal conditions. J. Non-Newtonian Fluid Mech. 134, 16–26 (2006)
Petera, J.: A new finite element scheme using the Lagrangian framework for simulation of viscoelastic fluid flows. J. Non-Newtonian Fluid Mec. 103, 1–43 (2002)
Martys, N.S.: Study of a dissipative particle dynamics based approach for modeling suspensions. Journal of Rheology 49, 401–424 (2005)
Foss, D.R., Brady, J.F.: Structure, diffusion,and rheology of Brownian suspensions by Stokesian dynamics simulations. J. Fluid Mechanics 407, 167–200 (2000)
Martys, N.S., George, W.L., Chun, B., Lootens, D.: A smoothed particle hydrodynamics based fluid model with a spatially dependent viscosity: Application to flow of a suspension with a non-Newtonian fluid matrix (submitted for publication)
Martys, N.S.: A classical kinetic theory approach to lattice Boltzmann simulations. International Journal of Modern Physics 12, 1169–1178 (2001)
Hoogerbrugge, P.J., Koelman, J.M.V.A.: Simulating microscopic hydrodynamic phenomena with dissipative particle dynamics. Europhysics Letters 19, 155–160 (1992)
Landau, L.D., Lifshitz, E.M.: Fluid Mechanic. Pergamon Press, Oxford (1987)
Ferraris, C.: Private communication
Spangenberg, J., Roussel, N., Hattel, J.H., Thorborg, J., Geiker, M.R., Stang, H., Skocek, J.: Prediction of flow induced heterogeneities and their consequences in Self Compacting Concrete (SCC). In: Khayat, K., Feys, D. (eds.) Proceedings of SCC 2010, Montreal, Canada. Springer (2010)
Jeffery, G.B.: Proceeding of Royal Society A 102, 161–179 (1922)
Folgar, F., Tucker, C.F.: J. Reinf. Plast. Comp. 3, 98 (1984)
Rahnama, M., Koch, D.L., Shaqfeh, E.S.G.: Phys. Fluids 7(3), 487 (1995)
Anczurowski, E., Mason, S.G.: J. Colloïd Interface Sci. 23, 522 (1967)
Trevelyan, B.J., Mason, S.G.: J. Colloïd Sci. 6, 354 (1951)
Mason, S.G., Manley, R.S.: Proc. Royal Soc., Series A 238, 117 (1957)
Harris, J.B., Pittman, J.F.T.: J. Colloïd Interface Sci. 50(2), 280 (1975)
Bibbo, M.A., Dinh, S.M., Armstrong, R.C.: J. Rheol. 29(6), 905 (1985)
Kameswara Rao, C.V.S.: Cem. Concr. Res. 9, 685 (1979)
Dinh, S.M., Armstrong, S.M.: J. Rheol. 28(3), 207 (1984)
Bretherton, F.P.: J. Fluid Mechanics 14, 284 (1962)
Goldsmith, H.L., Mason, S.G.: Rheology: Theory and Applications, New-York, vol. 4, ch. 2, pp. 85–250 (1967)
Lipscomb, G.G., Denn, M.M.: J. Non-Newt. Fluid Mech. 26, 297 (1988)
Vincent, M.: PhD-thesis, ENS des Mines de Paris (1984)
Taskernam-Kroser, R., Ziabicki, A.: J. Polymer Sciences 1(6), 491 (1963)
Martinie, L., Rossi, P., Roussel, N.: Cem. Concr. Res. 40, 226 (2010)
Petrich, M.P., Koch, D.L., Cohen, C.: J. Non-Newt. Fluid Mech. 95, 101 (2000)
Kooiman, A.G.: PhD-thesis, DTU, Netherlands (2000)
Ozyurt, N., Mason, T.O., Shah, S.P.: Cem. Concr. Res. 36, 1653 (2006)
Lataste, J.F., Behloul, M., Breysse, D.: Proceedings of the AUGC Symposium, Bordeaux, France (2007)
Boulekbache, B., Hamrat, M., Chemrouk, M., Amziane, S.: EJECE (1985)
Ozyurt, N., Woo, N.Y., Mason, T.O., Shah, S.P.: ACI Materials Journal. Technical Paper 103(5), 340 (2006)
Dupont, D., Vandewalle, L.: Cem. Concr. Comp. 27, 391 (2005)
Martinie, L., Roussel, N.: Simple tools for fiber orientation prediction in industrial practice. Cem. Concr. Res. 41, 993–1000 (2010, 2011)
Martinie, L.: LCPC, Université Paris-Est. PhD thesis (2010) (in French)
Aveston, J., Kelly, A.: J. Mater. Science 8, 352 (1973)
Krenchel, H.: In: Neville, A. (ed.), p. 69. The Construction Press, UK (1975)
Aidun, C.K., Clausen, J.R.: Lattice-Boltzmann Method for Complex Flows. Annual Review of Fluid Mechanics 42(1), 439–472 (2010)
Körner, C., Thies, M., Hofmann, T., Thürey, N., Rüde, N.U.: Lattice Boltzmann Model for Free Surface Flow for Modeling Foaming. Journal of Statistical Physics (2005)
Feng, Z., Michaelides, E.: Proteus: a direct forcing method in the simulations of particulate flows. Journal of Computational Physics 202(1), 20–51 (2005)
Švec, O., Skoček, J., Stang, H., Olesen, J.F., Poulsen, P.N.: Flow simulation of fiber reinforced self compacting concrete using Lattice Boltzmann method. In: Proceedings of 13th International Congress on the Chemistry of Cement, Madrid (2011)
Skoček, J., Švec, O., Spangenberg, J., Stang, H., Geiker, M.R., Roussel, N., Hattel, J.: Modeling of flow of particles in a non-Newtonian fluid using lattice Boltzmann method. In: Proceedings of 13th International Congress on the Chemistry of Cement, Madrid (2011)
Nguyen, N.Q., Ladd, A.: Lubrication corrections for lattice-Boltzmann simulations of particle suspensions. Physical Review E 66(4), 1–12 (2002)
Švec, O., Skoček, J., Stang, H., Olesen, J.F., Poulsen, P.N.: Fully coupled Lattice Boltzmann simulation of fiber reinforced self compacting concrete flow. In: Proceedings of Computer Methods in Mechanics 2011, Warsaw, Poland (2011)
Spangenberg, J., Roussel, N., Hattel, J.H., Stang, H., Skocek, J., Geiker, M.R.: Flow induced particle migration in fresh concrete: Theoretical frame, numerical simulations and experimental results on model fluids. Accepted for publication in Cem. Concr. Res. (2011)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 RILEM
About this chapter
Cite this chapter
Vasilic, K. et al. (2014). Advanced Methods and Future Perspectives. In: Roussel, N., Gram, A. (eds) Simulation of Fresh Concrete Flow. RILEM State-of-the-Art Reports, vol 15. Springer, Dordrecht. https://doi.org/10.1007/978-94-017-8884-7_5
Download citation
DOI: https://doi.org/10.1007/978-94-017-8884-7_5
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-017-8883-0
Online ISBN: 978-94-017-8884-7
eBook Packages: EngineeringEngineering (R0)