Abstract
The focus of the present study is on the development of a methodology for estimating the parameters of a cantilever beam based on experimentally measured vibration response. A aluminum cantilever beam of known dimensions is excited at a known location and the tip accelerations are measured. Subsequently, a particle-filtering-based strategy is used to estimate the system parameters from the vibration response.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Brown RG, Hwang PYC (1992) Introduction to random signals and applied Kalman filtering. Wiley, New York
Chaudhari TD, Maiti SK (2000) Experimental verification of a method of detection of crack in taper and segmented beams based on modelling of transverse vibration. Int J Fract 102:L33–L38
Patil DP, Maiti SK (2005) Experimental verification of a method of detection of multiple cracks in beams based on frequency measurements. J Sound Vib 281:439–451
Gordon NJ, Salmond DJ, Smith AFM (1993) Novel approach to nonlinear/nonGaussian Bayesian state estimation. IEE Proc F 140(2):107–113
Nasrellah HA, Manohar CS (2011) Finite element method based Monte Carlo filters for structural system identification. Probab Eng Mech 26(2):294–307
Nasrellah HA, Manohar CS (2011) Particle filters for structural system identification using multiple test and sensor data: a combined computational and experimental study. Struct Control Health Monit 18(1):99–120
Kalman RE (1960) A new approach to linear filtering and prediction problems. ASME J Basic Eng 82(D):35–45
Myotyri E, Pulkkinen U, Simola K (2006) Application of stochastic filtering for lifetime prediction. Reliab Eng Syst Saf 91:200–208
Rangaraj R, Rao L, Banerjee A, Gupta S (2011) Identification of Fatigue Cracks in vibrating beams using a particle filtering algorithm. National Aerospace seminar on aircraft structures. IIT, Kanpur
Acknowledgements
This study has been supported by Aeronautical Development Agency, Govt. of India under the National Program on Micro and Smart Systems (NPMASS).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer India
About this paper
Cite this paper
Pokale, B., Rangaraj, R., Gupta, S. (2013). Parameter Identification in a Beam from Experimental Vibration Measurements Using Particle Filtering. In: Chakraborty, S., Bhattacharya, G. (eds) Proceedings of the International Symposium on Engineering under Uncertainty: Safety Assessment and Management (ISEUSAM - 2012). Springer, India. https://doi.org/10.1007/978-81-322-0757-3_44
Download citation
DOI: https://doi.org/10.1007/978-81-322-0757-3_44
Published:
Publisher Name: Springer, India
Print ISBN: 978-81-322-0756-6
Online ISBN: 978-81-322-0757-3
eBook Packages: EngineeringEngineering (R0)