Abstract
Past, present, and future of structural health assessment (SHA) concepts and related areas, as envisioned by the authors, are briefly reviewed in this chapter. The growth in the related areas has been exponential covering several engineering disciplines. After presenting the basic concept, the authors discussed its growth from infancy, that is, hitting something with a hammer and listening to sound, to the use of most recent development of wireless sensors and the associated advanced signal processing algorithms. Available SHA methods are summarized in the first part of this chapter. The works conducted by the research team of the authors are emphasized. Later, some of the future challenges in SHA areas are identified. Since it is a relatively new multidisciplinary area, the education component is also highlighted at the end.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Aditya G, Chakraborty S (2008) Sensitivity based health monitoring of structures with static responses. Scientia Iranica 15(3):267–274
Anh TV (2009) Enhancements to the damage locating vector method for structural health monitoring. Ph. D. dissertation, National University of Singapore, Singapore
Bernal D (2002) Load vectors for damage localization. J Eng Mech ASCE 128(1):7–14
Bray DE (2000) Historical review of technology development in NDE. In: 15th world conference on nondestructive testing, Roma, Italy, 15–21 Oct 2000
Carden EP, Fanning P (2004) Vibration based condition monitoring: a review. Struct Health Monit 3(4):355–377
Ceravolo R (2009) Time–frequency analysis. Chapter 26. In: Boller C, Chang F-K, Fuzino Y (eds) Encyclopedia of structural health monitoring. Wiley, Chichester
Chang PC, Flatau A, Liu SC (2003) Review paper: health monitoring of civil infrastructure. Struct Health Monit 2(3):257–267
Chase JG, Begoc V, Barroso LR (2005) Efficient structural health monitoring for benchmark structure using adaptive RLS filters. Comput Struct 83:639–647
Chase JG, Spieth HA, Blome CF, Mandler JB (2005) LMS-based structural health monitoring of a non-linear rocking structure. Earthq Eng Struct Dyn 34:909–930
Choi YM, Cho HN, Kim YB, Hwang YK (2001) Structural identification with unknown input excitation. KSCE J Civil Eng 5(3):207–213
Das AK, Haldar A (2010) Structural integrity assessment under uncertainty for three dimensional offshore structures. Int J Terraspace Sci Eng (IJTSE) 2(2):101–111
Das AK, Haldar A (2010) Structural health assessment of truss-type bridges using noise-contaminated uncertain dynamic response information. Int J Eng under Uncertainity: Hazards, Assessment, and Mitigation 2(3–4):75–87
Das AK, Haldar A (2012) Health assessment of three dimensional large structural systems – a novel approach. Int J Life Cycle Reliab Saf Eng (in press)
Das AK, Haldar A, Chakraborty S (2012) Health assessment of large two dimensional structures using minimum information – recent advances. Adv Civil Eng. Article ID 582472. doi:10.1155/2012/582472
Doebling SW, Farrar CR, Prime MB, Shevitz DW (1996) Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: a literature review, Los Alamos National Laboratory. Report no. LA-13070-MS
Fan W, Qiao P (2010) Vibration-based damage identification methods: a review and comparative study. Struct Health Monit 10(14):1–29
Garrido R, Rivero-Angeles FJ (2006) Hysteresis and parameter estimation of MDOF systems by a continuous-time least-squares method. J Earthq Eng 10(2):237–264
Ghanem R, Ferro G (2006) Health monitoring for strongly non-linear systems using the ensemble Kalman filter. Struct Control Health Monit 13:245–259
Ghosh S, Roy D, Manohar CS (2007) New forms of extended Kalman filter via transversal linearization and applications to structural system identification. Comput Methods Appl Mech Eng 196:5063–5083
Haldar A (ed) (2012) Health assessment of engineered structures: bridges, buildings and other infrastructures. World Scientific Publishing Co
Haldar A, Das AK (2010) Prognosis of structural health – nondestructive methods. Int J Perform Eng. Special Issue on Prognostics and Health Management (PHM) 6(5):487–498
Hellier CJ (2003) Handbook of nondestructive evaluation. The McGraw-Hill Companies, Inc, New York
Hoshiya M, Saito E (1984) Structural identification by extended Kalman filter. J Eng Mech ASCE 110(12):1757–1770
Huang NE, Huang K, Chiang W-L (2005) HHT-based bridge structural-health monitoring. Chapter 12. In: Huang NE, Shen SS (eds) Hilbert-Huang transform and its applications. World Scientific Publishing Co. Pte. Ltd., Singapore
Huang NE, Shen Z, Long SR, Wu MC, Shih HH, Zheng Q, Yen N-C, Tung CC, Liu HH (1998) The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysis. Proc R Soc Lond A 454:903–995
Ibanez P (1973) Identification of dynamic parameters of linear and non-linear structural models from experimental data. Nucl Eng Design 25:30–41
Katkhuda H (2004) In-service health assessment of real structures at the element level with unknown input and limited global responses. Ph. D. thesis, University of Arizona, Tucson, USA
Katkhuda H, Haldar A (2008) A novel health assessment technique with minimum information. Struct Control Health Monit 15(6):821–838
Katkhuda H, Martinez-Flores R, Haldar A (2005) Health assessment at local level with unknown input excitation. J Struct Eng ASCE 131(6):956–965
Kerschen G, Worden K, Vakakis AF, Golinval JC (2006) Past, present and future of nonlinear system identification in structural dynamics. Mech Syst Signal Process 20(3):505–592
Koh CG, See LM (1994) Identification and uncertainty estimation of structural parameters. J Eng Mech 120(6):1219–1236
Ling X, Haldar A (2004) Element level system identification with unknown input with Rayleigh damping. J Eng Mech ASCE 130(8):877–885
Liu X, Escamilla-Ambrosio PJ, Lieven NAJ (2009) Extended Kalman filtering for the detection of damage in linear mechanical structures. J Sound Vib 325:1023–1046
Martinez-Flores R, Haldar A (2007) Experimental verification of a structural health assessment method without excitation information. J Struct Eng 34(1):33–39
Martinez-Flores R, Katkhuda H, Haldar A (2008) A novel health assessment technique with minimum information: verification. Int J Perform Eng 4(2):121–140
Maybeck PS (1979) Stochastic models, estimation, and control theory. Academic, New York
McCaan D, Jones NP, Ellis JH (1998) Toward consideration of the value of information in structural performance assessment. Paper no. T216-6. Structural Engineering World Wide, CD-ROM
Montalvao M, Maia NMM, Ribeiro AMR (2006) A review of vibration-based structural health monitoring with special emphasis on composite materials. Shock Vib Dig 38(4):295–324
Rytter A (1993) Vibration based inspection of civil engineering structures. Ph. D. dissertation, Department of Building Technology and Structural Engineering, Aalborg University, Denmark
Sajjad S, Zaidi H, Zanardelli WG, Aviyente, S, Strangas EG (2007) Comparative study of time-frequency methods for the detection and categorization of intermittent fault in electrical devices. Diagnostics for electric machines, power electronics and drive, SDEMPED, IEEE symposium, 6–8 September, pp 39–45
Sanayei M, Imbaro GR, McClain JAS, Brown LC (1997) Structural model updating using experimental static measurements. J Struct Eng ASCE 123(6):792–798
Sohn H, Farrar CR, Hemez FM, Shunk DD, Stinemates DW, Nadler BR, Czarnecki JJ (2004) A review of structural health monitoring literature: 1996–2001, Los Alamos National Laboratory, LA-13976-MS
Spencer BF Jr, Ruiz-Sandoval ME, Kurata N (2004) Smart sensing technology: opportunities and challenges. Struct Control Health Monit 11:349–368
Vo PH, Haldar A (2003) Post processing of linear accelerometer data in system identification. J Struct Eng 30(2):123–130
Vo PH, Haldar A (2004) Health assessment of beams – theoretical and experimental investigation. J Struct Eng, Special Issue on Advances in Health Monitoring/Assessment of Structures Including Heritage and Monument Structures 31(1):23–30
Wang D, Haldar A (1994) An element level SI with unknown input information. J Eng Mech ASCE 120(1):159–176
Wang D, Haldar A (1997) System identificatin with limited observations and without input. J Eng Mech ASCE 123(5):504–511
Welch G, Bishop G (2006) An introduction to the Kalman filter. Technical report. TR95-041 2006, Department of Computer Science, University of North Carolina at Chapel Hill, NC
Yadav SK, Banerjee S, Kundu T (2011) Effective damage sensitive feature extraction methods for crack detection using flaw scattered ultrasonic wave field signal. In: Proceedings of the 8th international workshop on structural health monitoring, Stanford, USA, 13–15 September
Yang JN, Huang H (2007) Sequential non-linear least-square estimation for damage identification of structures with unknown inputs and unknown outputs. Int J Non-Linear Mech 42:789–801
Yang JN, Huang H, Lin S (2006) Sequential non-linear least-square estimation for damage identification of structures. Int J Non-Linear Mech 41:124–140
Yang JN, Lei Y, Lin S, Huang N (2004) Hilbert-Huang based approach for structural damage detection. J Eng Mech 130(1):85–95
Yang JN, Lin S (2005) Identification of parametric variations of structures based on least squares estimation and adaptive tracking technique. J Eng Mech 131(3):290–298
Yang JN, Lin S, Huang HW, Zhou L (2006) An adaptive extended Kalman filter for structural damage identification. J Struct Control Health Monit 13:849–867
Yang JN, Pan S, Lin S (2007) Least-squares estimation with unknown excitations for damage identification of structures. J Eng Mech 133(1):12–21
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer India
About this paper
Cite this paper
Haldar, A., Das, A.K. (2013). Past, Resent, and Future of Structural Health Assessment. In: Chakraborty, S., Bhattacharya, G. (eds) Proceedings of the International Symposium on Engineering under Uncertainty: Safety Assessment and Management (ISEUSAM - 2012). Springer, India. https://doi.org/10.1007/978-81-322-0757-3_14
Download citation
DOI: https://doi.org/10.1007/978-81-322-0757-3_14
Published:
Publisher Name: Springer, India
Print ISBN: 978-81-322-0756-6
Online ISBN: 978-81-322-0757-3
eBook Packages: EngineeringEngineering (R0)