Abstract
Thermal spraying refers to a group of processes that apply consumable powders or wires in the form of finely divided molten and semi-molten droplets to produce coatings. Thermal spraying dates back to 1911 when Dr. Schoop was successful in atomising molten metal by high pressure gas and propelled them on to a surface. In 1912 he produced a device to spray metal wires and this process is known as flame spraying. Subsequently he introduced new technique for thermal spraying by using electricity to melt feedstock materials. This method in present times is referred as arc spraying. The idea of using powder for the flame spraying process was developed for the first time by F. Schori in 1930.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Tucker RC Jr (1994) Thermal spray coatings. In: Surface engineering, vol 5, ASM handbook. ASM, Materials Park, OH, p 497
Kharlamov YA (1987) Mater Sci Eng 93A:1
Fauchais P, Vardelle A, Dussoubs B (2001) J Therm Spray Technol 10:44
Pawlowski L (1995) The science and engineering of thermal spray coatings. Wiley, Chichester
Wood RJK (2010) Int J Refract Met Hard Mater 28:82
Roy M, Pauschitz A, Franek F (2002) In: Proceedings of the 15th international corrosion congress, Grenada, Spain, 22–27 Sept 2002
Roy M, Narkhede BE, Paul SN (1999) In: Prashad H (ed) Tribology in 2000 and beyond. Kalajyothi, Hyderabad, India, p 205
Kear BH, Sadangi RK, Jain M, Yao R, Kalman Z, Skandan G, Mayo WE (2000) J Therm Spray Technol 9:399
Roy M, Pauschitz A, Benardi J, Franek F (2006) J Therm Spray Technol 15(3):372
He J, Lavernia EJ (2000) Metall Mater Trans 31A:555
Guilemany JM, Calero JA (1997) In: Berndt CC (ed) A united forum for scientific and technological advances. ASM, Materials Park, OH, p 15
Roy M, Sundararajan G (1971) In: Proceedings of the 12th international colloquim of tribology, Stuttgart/Ostfilderm, Germany, Jan 2000
Mohanty M, Smith RW, De Bonte M, Celis JP, Lugscheider E (1996) Wear 198:251
Marshall BD, Noma T, Evans AG (1982) J Am Ceram Soc 65(10):C175
Leigh SH, Lin CK, Berndt CC (1995) J Am Ceram Soc 80(8):2093
Walpole RE, Myers RH (1978) Probability and statistics for engineers and scientists, 2nd edn. Macmillan, New York
Lin CK, Berndt CC (1995) J Mater Sci 30:111
Antis GR, Chantikul P, Lawn BR, Marshall DB (1981) J Am Ceram Soc 64:533
Evans AG, Charles EA (1976) J Am Ceram Soc 59:371
Niihara K, Morena R, Hassleman DPH (1983) In: Bradt RC, Evans AG, Hassleman DP, Lange FF (eds) Fracture mechanics of ceramics. Plenum, New York, p 97
Niihara K, Morena R, Hassleman DPH (1982) J Mater Sci Lett 1:13
Roy M, Pauschitz A, Franek F (2006) Tribol Int 39:29
Greenwood JA, Williamson JBP (1966) Proc R Soc Lond A 295:300
Lim SC, Ashby MF (1987) Acta Metall 35:11
Zhao XQ, Zhou HD, Chen JM (2006) Mater Sci Eng A431:290
Roy M, Pauschitz A, Franek F (2004) Wear 257:799–811
Zhu YC, Ding CX (1999) Nanostruct Mater 11:319
Rodrıguez J, Martın A, Fernandez R, Fernández JE (2003) Wear 255:950
Roy M (2009) Trans Indian Inst Met 62:197
Lenling WJ, Smith MF, Henfling JA (1990) In: Proceedings of the third thermal spray conference, Long Beach, CA, p 227
Ito H, Nakamura R, Shiroyama M, Sasaki T (1990) In: Proceedings of the third thermal spray conference, Long Beach, CA, p 223
Stewart A, Shipway P, Maccartney DG (1998) Surf Coat Technol 105:13
Khameneh Asl S, Hyderzadeh Sohi M, Hadavi SMM (2004) Mater Sci Forum 465–466:427
Khameneh Asl S, Hyderzadeh Sohi M, Hokamoto K, Umera M (2006) Wear 260:1203
Guilemany JM, Miguel JM, Vizcaino S, Lorenzana C, Delgado J, Sanchez J (2002) Surf Coat Technol 157:207
Stoica V, Ahmed R, Itsukaichi T (2005) Surf Coat Technol 199:7
Stoica V, Ahmed R, Itsukaichib T, Tobe S (2004) Wear 257:1103
Stoica V, Ahmed R, Golshan M, Tobe S (2004) J Therm Spray Technol 13:93
Mateos J, Cuetos JM, Vijande R, Farnandez E (2001) Tribol Int 34:345
Bolelli G, Rauch J, Cannillo V, Killinger A, Lusvarghi L, Gadow R (2009) J Therm Spray Technol 18:35
Sudaprasert T, Shipway PH, MaCartney DG (2003) Wear 255:7
Maiti AK, Mukhopadhyah N, Raman R (2007) Surf Coat Technol 201:7781
Berget J, Rohne T, Bardal E (2007) Surf Coat Technol 201:7619
Chivavibul P, Watanabe M, Kuroda S, Shinoda K (2007) Surf Coat Technol 202:509
Lee CW, Han JH, Yoon J, Shin MC, Kwun SI (2010) Surf Coat Technol 204:2223
Karimi A, Verdon C, Barbezat G (1993) Surf Coat Technol 57:81
Ozdemir I, Tekmen C, Tsunekawa Y, Grund T (2010) J Therm Spray Technol 19:384
Hawthorne HM, Arsenault B, Immarigeon JP, Legoux JG, Parameswaran VR (1999) Wear 225–229:825
Levy AV, Wang B (1988) Wear 121:325
Barbezat B, Nicoll AR, Sicknger A (1993) Wear 162–164:529
Wood RJK, Mellor BG, Binfield ML (1997) Wear 211:70
Kim HJ, Kweon YG, Chang RW (1994) J Therm Spray Technol 3:169
Roy M, Narkhede BE, Paul SN (1999) In: Proceedings of the 2nd international conference on industrial tribology, Hyderabad, India, 1–4 Dec 1999, p 205
Hearley JA, Little JA, Sturgeon AJ (1999) Wear 233–235:328
Wang BQ, Verstak A (1999) Wear 233–235:342
Smith RW, Mohanty M, Stessel E, Verstak A, Ohmori A (eds) (1995) Thermal spraying-current status and future trends. In: Proceedings of ITSC’95, High Temperature Society of Japan, Osaka, Japan, p 1121
Verstak A, Vitiaz P, Lugscheider E (1996) DVS Berichte 175:71, German Welding Society
Tayor ML, Murphy JG, King HW (1997) In: Proceedings of ASM symposium on tribological mechanism and wear problems in materials, ASM International, Materials Park, OH, p 143
Li CJ, Yang GJ, Ohmori A (2006) Wear 260:1166
Tsai PC, Lee JH, Chang C-L (2007) Surf Coat Technol 202:719
Kulu P, Hussainova I, Veinthal R (2005) Wear 258:488
Uusitalo MA, Vuoristo PMJ, Mäntyla TA (2002) Wear 252:586
Wang BQ, Lee SW (1997) Wear 203–204:580
Guilemany JM, Cinca N, Fernández J, Sampath S (2008) J Therm Spray Technol 17:762
Dent AH, DePalo S, Sampath S (2002) J Therm Spray Technol 11:551
Abdel-Samad AA, El-Bahloul AAM, Lugscheider E, Rassoul SA (2000) J Mater Sci 35:3127
Gawne DT, Qui Z, Zhang T, Bao Y, Zhang K (2001) J Therm Spray Technol 10:599
Liu Y, Fischer T, Dent A (2003) Surf Coat Technol 167:68
Habib KA, Saura JJ, Ferrer C, Damra MS, Gimenez E, Cabedo L (2006) Surf Coat Technol 201:1436
Nerz JE, Kushner BA, Jr, Rotolico AJ (1991) In: Proceedings of 4th national thermal spraying conference, Pittsburg, PA, 4–10 May 1991
Lee HC, Gurland J (1978) Mater Sci Eng 33:125
Kumari K, Anand K, Bellaci M, Giannozzi M (2010) Wear 268:1309
Stewart DA, Shipway PH, McCartney DG (1998) Surf Coat Technol 105:13
Wang Q, Chen ZH, Ding ZX (2009) Tribol Int 42:1046
Wirojanupatump S, Shipway PH, McCartney DG (2001) Wear 249:829
Zum Ghar KH, Eldis GT (1980) Wear 64:175
Thakare MR, Wharton JA, Wood RJK, Menger C (2008) Tribol Int 41:629
Stewart DA, Shipway PH, McCartney DG (1999) Wear 225–229:789
Qi X, Eigen N, Aust E, Gartner F, Klassen T, Bormann R (2006) Surf Coat Technol 200:5037
Kim JH, Baik KH, Seong BG, Hwang SY (2007) Mater Sci Eng A449–551:876
Jordan EH, Gell M, Sohn YH, Goberman D, Shaw L, Jiang S, Wang M, Xiao TD, Wang Y, Strutt P (2001) Mater Sci Eng A301:80
Gell M, Jordan EH, Sohn YH, Goberman D, Shaw L, Xiao TD (2001) Surf Coat Technol 146–147:48
Baik KH, Kim JH, Seong BG (2007) Mater Sci Eng A449–551:846
McGrann RTR, Shanley JR (1997) In: Berndt CC (ed) Thermal spray: a united forum for scientific and technological advances. ASM International, Materials Park, OH, p 341
Wheeler DW, Wood RJK (2005) Wear 258:526
Lavin P (1998) Coating of continuous casting machine components. International Patent, Publication Number WO 98/21379. Monitor Coating and Engineering Limited
Sato Y, Midorikawa S, Iwashita Y, Yokogawa A, Takano T (1993) Service life extension technique for cold rolling rolls. Kawasaki Steel Technical Report No. 29, p 74
Kasai S, Sato Y, Yanagisawa A, Ichihara A, Onishi H (1987) Development of surface treatment techniques for process rolls in steelworks. Report No. 17, p 81
Ren X, Mei X, She J, Ma J (2007) Materials resistance to liquid zinc corrosion of surface of sink roll. In: Proceedings of Sino-Swedish structural materials symposium 2007, p 125
Sawa M, Oohori J (1995) In: Ohmri A (ed) Thermal spraying: current status and future tends. Proceedings of 14th international thermal spray conference, Kobe, Japan, 22–26 May 1995. High Temperature Society of Japan, p 37
Seong BG, Hwang SY, Kim MC, Kimin KY (2000) In: Berndt CC (ed) Thermal spray: surface engineering via applied research. Proceedings of 1st international thermal spray conference, Montreal QC, 8–11 May 2000. ASM International, Materials Park, OH, p 1159
Murakawa M, Watanabe S (1989) In: Proceedings of 2nd international conference on hot isostatic processing, theory and applications, Gaitherburg, MD, 7–9 June 1989
Picas JA, Forn A, Matthaus G (2006) Wear 261:477
Dong Y, Yan D, He J, Zhang J, Li X (2006) Surf Coat Technol 201:2455
Hollis K, Peters M, Bartram B (2003) In: Moreau C, Marple B (eds) Thermal spray 2003: advancing the science and applying the technology. Proceedings of the 2003 international thermal spray conference, Orlando, FL, 5–8 May 2003. ASM International, Materials Park, OH, p 153
Fukubayashi HH (2004) In: Proceedings of the international thermal spray conference 2004, Osaka, 10–12 May 2004. ASM International, Materials Park, OH, p 125
Sanz A (2004) Surf Coat Technol 177–178:1
Wang J, Zhang L, Sun B, Zhou Y (2000) Surf Coat Technol 130:69
Wang J, Sun B, Guo Q, Nishio M, Ogawa H (2002) J Therm Spray Technol 11(2):261
Fauchais P, Verdelle M (2010) J Therm Spray Technol 19:668
Fauchais P (1992) J Therm Spray Technol 1:117
Li CJ, Wu T, Li C-X, Sun B (2003) J Therm Spray Technol 12:80
Marple BR, Voyer J, Bisson JF, Moreau C (2001) J Mater Process Technol 117:418
Landes K (2006) Surf Coat Technol 201:1948
Gougeon P, Moreau C (1993) J Therm Spray Technol 2:229
Planche MP, Liao H, Coddet C (2004) Surf Coat Technol 182:215
Verdelle M, Renault T, Fauchais P (2002) High Temp Mater Process 6:469
Doubenskaia M, Bertrand P, Smurov I (2006) Surf Coat Technol 201:1955
Xiaa W, Zangb H, Wanga G, Wanga Y (2009) J Mater Process Technol 209:1955
Salimijazi HR, Pershin L, Coyle TW, Mostaghimi J, Chandra S, Lau YC, Rosenzweig L, Moran E (2007) J Therm Spray Technol 16:580
Kuroda S, Fukushima T, Kitahara S (1988) Thin Solid Films 164:157
Kuroda S, Clyne TW (1991) Thin Solid Films 200:49
Clyne TW, Gill SC (1996) J Therm Spray Technol 5:401
Matejicek J, Sampath S (2003) Acta Mater 51:863
Matejicek J, Sampath S, Gilmore D, Neiser R (2003) Acta Mater 51:873
Nadeau A, Pouliot L, Nadeau F, Blain J, Berube SA, Moreau C, Lamontagne M (2006) J Therm Spray Technol 15:744
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer-Verlag Wien
About this chapter
Cite this chapter
Wood, R.J.K., Roy, M. (2013). Tribology of Thermal-Sprayed Coatings. In: Roy, M. (eds) Surface Engineering for Enhanced Performance against Wear. Springer, Vienna. https://doi.org/10.1007/978-3-7091-0101-8_1
Download citation
DOI: https://doi.org/10.1007/978-3-7091-0101-8_1
Published:
Publisher Name: Springer, Vienna
Print ISBN: 978-3-7091-0100-1
Online ISBN: 978-3-7091-0101-8
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)