Zusammenfassung
Zu den Hochtemperaturwerkstoffen werden alle Materialien gezählt, die oberhalb von rund 500 °C dauerhaft für Bauteile eingesetzt werden können und damit langzeitig ausreichende mechanische Eigenschaften und Hochtemperatur-Korrosionsbeständigkeit aufweisen müssen. Dafür kommen metallische und keramische Werkstoffe infrage sowie intermetallische Phasen, welche eine Stellung zwischen den Metallen und den Keramiken einnehmen.
Die Anwendungen der Hochtemperaturwerkstoffe erstrecken sich im Wesentlichen auf folgende Bereiche:
-
Energietechnik
Dampf- und Gasturbinen, Dampfkessel, Hochtemperatur-Reaktorbau (Kernreaktoren mit Betriebsmitteltemperaturen oberhalb etwa 500 °C), Wärmetauscher und Hochtemperaturrohrleitungen, Ofenbau und Heiztechnik, Beleuchtungstechnik
-
Antriebstechnik
Flugtriebwerksbau und Motorenbau
-
Chemische Industrie
Hochtemperaturverfahren zur Herstellung chemischer Produkte (z. B. die Ammoniak-Synthese), Hochtemperaturpyrolyse (thermische Zersetzung chemischer Verbindungen, wie z. B. in der Petrolchemie das Spalten von C-H-Verbindungen oder die Müllverbrennung), Kohleveredlungstechniken, Wasserstofferzeugung und Synthesegasherstellung durch Sonnenenergie
-
Hüttentechnik und Maschinenbau
Prozesse der Metallurgie und des Glasschmelzens sowie anderer Verfahren zur Rohstoffgewinnung und -verarbeitung, Hochtemperatur-Werkzeugbau.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
Notes
- 1.
Insgesamt bleibt der Eindruck einer martensitischen Struktur trotz der hohen Anlasstemperatur im Lichtmikroskop erhalten, so dass diese Stähle meist einfach als martensitische Cr-Stähle bezeichnet werden.
- 2.
Jede Atomsorte für sich bildet ein kubisch-primitives Teilgitter. Die kristallographische Raumgruppenbezeichnung für Ni\({}_{3}\)Al lautet \(\mathrm{Pm}\bar{3}\mathrm{m}\) (P steht für primitiv). Die einfach-kubischen Teilgitter als Überstruktur ineinander geschachtelt ergeben das L1\({}_{2}\) Gesamtgitter (siehe auch Abb. 6.61).
Literatur
T.B. Massalski (Hrsg.): Binary Alloys Phase Diagrams. ASM International, Materials Park/Ohio (1990)
J. Falke, M. Regitz (Hrsg.): Römpp Chemie-Lexikon. Georg Thieme Verlag, Stuttgart (1990)
G.R. Wallwork: The Oxidation of Alloys. Rep. Prog. Phys. 39, 401–485 (1976)
Stahlinstitut VDEh (Hrsg.): Stahl-Eisen-Liste, 11. Aufl. Stahleisen-Verlag, Düsseldorf (2004)
M.J. Bennett, D.P. Moon: Effect of active elements on the oxidation behaviour of Cr\({}_{\mathrm{2}}\)O\({}_{\mathrm{3}}\)-formers. In: E. Lang (Hrsg.) The Role of Active Elements in the Oxidation Behaviour of High Temperature Metals and Alloys, S. 111–129. Elsevier Appl. Sci., London (1989)
J. Glen: Effect of alloying elements on the high-temperature tensile strength of normalized low-carbon steel. J. Iron Steel Inst. 186, 21–48 (1957)
A. Rahmel: Beitrag zur Frage des Zunderverhaltens von Kesselbaustählen. Mitt. VGB, 74, 319–332 (1961)
H. Naoi, M. Ohgami, Y. Hasegawa, T. Fujita: Mechanical properties of 12Cr-W-Co ferritic steels with high creep rupture strength. In: D. Coutsouradis, J.H. Davidson, J. Ewald, P. Greenfield, T. Khan, M. Malik, D.B. Meadowcroft, V. Regis, R.B. Scarlin, F. Schubert, D.V. Thornton (Hrsg.) Materials for Advanced Power Engineering 1994, Part I, S. 425–434. Kluwer Academic Publ., Dordrecht (1994)
J.H. Davidson et al.: The development of oxidation-resistant Fe-Ni-Cr-Al alloys for use at temperatures up to 1300 °C. In: I. Kirman et al. (Hrsg.) Behaviour of High Temperature Alloys in Aggressive Environments, S. 209–224. Proc. Int. Conf. Petten/The Netherlands, 15–18 Oct. 1979. The Metals Society, London (1980)
Y. Mishima, S. Ochiai, T. Suzuki: Lattice parameters of Ni(γ), Ni\({}_{\mathrm{3}}\)Al(\(\gamma^{\prime}\)) and Ni\({}_{\mathrm{3}}\)Ga(\(\gamma^{\prime}\)) solid solutions with additions of transition and B-subgroup elements. Acta Metall. 33, 1161–1169 (1985)
D.R. Coupland, C.W. Hall, I.R. McGill: Platinum-enriched superalloys. Platinum Met. Rev. 26, 146–157 (1982)
G. Frank: Mikrostrukturelle Ursachen des Negativen Kriechens von gegossenen Superlegierungen. Dissertation, Universität Erlangen-Nürnberg (1990)
T.M. Pollock, A.S. Argon: Directional coarsening in nickel-base single crystals with high volume fractions of coherent precipitates. Acta Metall. Mater. 42, 1859–1874 (1994)
L. Müller, T. Link, M. Feller-Kniepmeier: Temperature dependence of the thermal lattice mismatch in a single crystal nickel-base superalloy measured by neutron diffraction. Scr. Metall. Mater. 26, 1297–1302 (1992)
H. Biermann: Röntgenographische Bestimmung von inneren Spannungen in der Nickelbasis-Superlegierung SRR 99. Fortschr.-Ber. VDI, Reihe 5, Nr. 325, S. 64. VDI-Verlag, Düsseldorf (1993)
L.R. Woodyatt, C.T. Sims, H.J. Beattie Jr.: Prediction of sigma-type phase occurence from compositions in austenitic superalloys. Trans. Met. Soc. AIME 236, 519–527 (1966)
L. Pauling: The nature of the interatomic forces in metals. Phys. Rev. 54, 899–904 (1938)
L. Darken, R.W. Gurry: Physical Chemistry of Metals, S. 86. McGraw-Hill, New York (1953)
M. Morinaga, N. Yukawa, H. Ezaki, H. Adachi: Solid solubilities in transition-metal-based F.C.C. alloys. Phil. Mag. A 51, 223–246 (1985)
M. Morinaga, N. Yukawa, H. Ezaki, H. Adachi: Solid solubilities in nickel-based F.C.C. alloys. Phil. Mag. A 51, 247–252 (1985)
K. Matsugi, Y. Murata, M. Morinaga, N. Yukawa: Realistic advancement for nickel-based single crystal superalloys by the d-electrons concept. In: S.D. Antolovich et al. (Hrsg.) Superalloys 1992, S. 307–316. Proc. 7th Int. Symp. on Superalloys, Seven Springs/Pa. The Minerals, Metals & Materials Society, Warrendale/Pa. (1992)
Structures of Nimonic Alloys. Henry Wiggin & Comp., Publication 3563 (1974)
A.K. Koul, R. Thamburaj: Serrated grain boundary formation potential of Ni-based superalloys and its implications. Metall. Trans. 16A, 17–26 (1985)
U. Oestern: Diplomarbeit, FH Osnabrück (1994)
R. Weigelt: Diplomarbeit, FH Osnabrück (1995)
A.K. Koul, D.D. Morphy: Serrated grain boundary formation in nickel-base superalloys. Microstruct. Sci. 11, 79–88 (1983)
A.K. Koul, G.H. Gessinger: On the mechanism of serrated grain boundary formation in Ni-based superalloys. Acta Metall. 31, 1061–1069 (1983)
H. Loyer Danflou, M. Macia, T.H. Sanders, T. Khan: Mechanisms of formation of serrated grain boundaries in nickel-base superalloys. In: R.D. Kissinger et al. (Hrsg.) Superalloys 1996, S. 119–127. Proc. 8th Int. Symp. on Superalloys, Seven Springs/Pa. The Minerals, Metals & Materials Society, Warrendale/Pa. (1996)
R. Bürgel: Beitrag zum Ringversuch zur quantitativen Gefügecharakterisierung einer einkristallinen Nickelbasis-Superlegierung, 2002, unveröffentlicht
M. McLean: Directionally Solidified Materials for High Temperature Service. The Metals Society, London (1983)
T.M. Pollock et al.: Grain defect formation during directional solidification of nickel base single crystals. in: S.D. Antolovich et al. (Hrsg.) Superalloys 1992, S. 125–134. Proc. 7th Int. Symp. on Superalloys, Seven Springs/Pa.. The Minerals, Metals & Materials Society, Warrendale/Pa. (1992)
A.F. Giamei, B.H. Kear: On the nature of freckles in nickel base superalloys. Metall. Trans. 1A, 2185–2192 (1970)
S.M. Copley, A.F. Giamei, S.M. Johnson, M.F. Hornbecker: The origin of freckles in unidirectionally solidified castings. Metall. Trans. 1A, 2193–2204 (1970)
D. Goldschmidt: Einkristalline Gasturbinenschaufeln aus Nickelbasis-Legierungen. Mat.-wiss. u. Werkstofftech. 25, 311–320 (1994)
A. Lohmüller, W. Eßer, J. Großmann, M. Hördler, J. Preuhs, R.F. Singer: Improved quality and economics of investment castings by liquid metal cooling – The selection of cooling media. In: T.M. Pollock et al. (Hrsg.) Superalloys 2000, S. 181–188. Proc. 9th Int. Symp. on Superalloys, Seven Springs/Pa. The Minerals, Metals & Materials Society, Warrendale/Pa. (2000)
M.A. Taha, W. Kurz: About microsegregation of nickel base superalloys. Z. Metallkd. 72, 546–549 (1981)
D. Ma, P.R. Sahm: Einkristallerstarrung der Ni-Basis-Superlegierung SRR99, Teil 2: Mikroseigerungsverhalten der Legierungselemente. Z. Metallkd. 87, 634–639 (1996)
W.S. Walston, J.C. Schaeffer, W.H. Murphy: A new type of microstructural instability in superalloys – SRZ. In: R.D. Kissinger et al. (Hrsg.) Superalloys 1996, S. 9–18. Proc. 8th Int. Symp. on Superalloys, Seven Springs/Pa. The Minerals, Metals & Materials Society, Warrendale/Pa. (1996)
E.W. Ross, K.S. O‘Hara: René N4: A first generation single crystal turbine airfoil alloy with improved oxidation resistance, low angle boundary strength and superior long time rupture strength. In: R.D. Kissinger et al. (Hrsg.) Superalloys 1996, S. 19–25. Proc. 8th Int. Symp. on Superalloys, Seven Springs/Pa. The Minerals, Metals & Materials Society, Warrendale/Pa. (1996)
M. Konter, E. Kats, N. Hofmann: A novel casting process for single crystal gas turbine components. In: T.M. Pollock et al. (Hrsg.) Superalloys 2000, S. 189–200. Proc. 9th Int. Symp. on Superalloys, Seven Springs/Pa. The Minerals, Metals & Materials Society, Warrendale/Pa. (2000)
V. Sass, U. Glatzel, M. Feller-Kniepmeier: Creep anisotropy in the monocrystalline nickel-base superalloy CMSX-4. In: R.D. Kissinger et al. (Hrsg.) Superalloys 1996, S. 283–290. Proc. 8th Int. Symp. on Superalloys, Seven Springs/Pa. The Minerals, Metals & Materials Society, Warrendale/Pa. (1996)
Y. Kondo et al.: Effect of morphology of \(\gamma^{\prime}\) phase on creep resistance of a single crystal nickel-based superalloy CMSX-4. In: R.D. Kissinger et al. (Hrsg.) Superalloys 1996, S. 297–304. Proc. 8th Int. Symp. on Superalloys, Seven Springs/Pa. The Minerals, Metals & Materials Society, Warrendale/Pa. (1996)
Introducing Mechanical Alloying. Huntington Alloys, Broschüre 77-310
G.F. Hüttig: Experimentelle Grundlagen des Begriffes „Mahlungsgleichgewicht“. Z. Metallkd. 48, 352–356 (1957)
C.P. Jongenburger: Secondary Recrystallisation in Oxide-Dispersion Strengthened Nickel-Base Alloys, Thèse No. 773. École Polytechnique Fédérale de Lausanne/Schweiz (1988)
C. Jongenburger, R.F. Singer: Recrystallization of ODS superalloys. In: E. Arzt, L. Schultz (Hrsg.) New Materials by Mechanical Alloying Techniques. S. 157–174. DGM Conf. Calw-Hirsau (FRG), 1988. DGM Informationsgesellschaft Verlag, Oberursel (1989)
J.D. Whittenberger: Properties of oxide dispersion strengthened alloys. In: E. Arzt, L. Schultz (Hrsg.) New Materials by Mechanical Alloying Techniques, S. 201–215. DGM Conf. Calw-Hirsau (FRG), 1988. DGM Informationsgesellschaft Verlag, Oberursel (1989)
R.A. Testin, B.A. Ewing, J.A. Spees: A high performance austenitic ODS superalloy sheet for advanced gas turbine applications. In: S.D. Antolovich et al. (Hrsg.) Superalloys 1992, S. 83–92. Proc. 7th Int. Symp. on Superalloys, Seven Springs/Pa. The Minerals, Metals & Materials Society, Warrendale/Pa. (1992)
R. Bürgel, B. Trück: unveröffentl. Ergebnisse. Brown Boveri & Cie. Mannheim (1983)
W. Jakobeit: PM Mo-TZM Turbine blades – Demands on mechanical properties. Int. J. Refract Hard Met. 2, 133–136 (1983)
C.S. Barrett, T.B. Massalski: Structure of Metals. McGraw-Hill, New York (1966)
M.H. Yoo et al.: Deformation and fracture of intermetallics, Overview No. 105. Acta Metall. Mater. 41, 987–1002 (1993)
G. Sauthoff: Intermetallics. VCH, Weinheim (1995)
D.B. Miracle: The physical and mechanical properties of NiAl, Overview No. 104. Acta Metall. Mater., 41, 649–684 (1993)
R. Darolia, W.S. Walston, M.V. Nathal: NiAl alloys for turbine airfoils. In: R.D. Kissinger et al. (Hrsg.) Superalloys 1996, S. 561–570. Proc. 8th Int. Symp. on Superalloys, Seven Springs/Pa. The Minerals, Metals & Materials Society, Warrendale/Pa. (1996)
C.M. Austin, T.J. Kelly: Gas turbine engine implementation of gamma titanium aluminide. In: R.D. Kissinger et al. (Hrsg.) Superalloys 1996, S. 539–543. Proc. 8th Int. Symp. on Superalloys, Seven Springs/Pa. The Minerals, Metals & Materials Society, Warrendale/Pa. (1996)
Y.-W. Kim: Ordered intermetallic alloys, Part III: Gamma titanium aluminides. J. Met. 46, No. 7, 30–39 (1994)
F.H. Froes, C. Suryanarayana, D. Eliezer: Review: Synthesis, properties and applications of titanium aluminides. J. Mater. Sci. 27, 5113–5140 (1992)
Werkstoffe u. Korr. 48, 1–78 (gesamtes Heft 1/97) (1997)
F.H. Froes, C. Suryanarayana, D. Eliezer: Review: Synthesis, properties and applications of titanium aluminides. J. Mater. Sci. 27, 5113–5140 (1992)
D.M. Shah: MoSi\({}_{\mathrm{2}}\) and other silicides as high temperature structural materials. In: S.D. Antolovich et al. (Hrsg.) Superalloys 1992, S. 409–422. Proc. 7th Int. Symp. on Superalloys, Seven Springs/Pa. The Minerals, Metals & Materials Society, Warrendale/Pa. (1992)
E. Drost, H. Gölitzer, M. Poniatowski, S. Zeuner: Platinwerkstoffe für Hochtemperatur-Einsatz. Metall 50, 492–498 (1996)
R.T. Holt, W. Wallace: Impurities and trace elements in nickel-base superalloys. Int. Metals Review 21, 1–24 (1976)
M. Kohno, M. Miyakawa, S. Kinoshita, A. Suzuki: Effect of chemical composition on properties of high purity 3.5NiCrMoV steel forging. In: Conf. on Advances in Materials for Fossil Power Plants, Chicago/IL. Am. Soc. Metals ASM, 81–88
Met. Technol. 11, gesamtes Oktober-Heft (1984)
M. McLean, A. Strang: Effects of trace elements on mechanical properties of superalloys. Met. Technol. 11, 454–464 (1984)
C.H. White, P.M. Williams, M. Morley: Cleaner superalloys via improved melting practices. Advanced Mat. Proc. 137, April, 53–57 (1990)
N.A. Waterman, M.F. Ashby (Hrsg.): Elsevier Materials Selector, Bd. 2. Elsevier, London (1991)
M.V. Nathal, S.R. Levine: Development of alternative engine materials. In: S.D. Antolovich et al. (Hrsg.) Superalloys 1992, S. 329–340. Proc. 7th Int. Symp. on Superalloys, Seven Springs/Pa. The Minerals, Metals & Materials Society, Warrendale/Pa. (1992)
K. Komeya, M. Matsui: High temperature engineering ceramics. In: R.W. Cahn, P. Haasen, E.J. Kramer (Hrsg.) Materials Science and Technology, Bd. 11, S. 517–565 M.V. Swain (Vol. Ed.). VCH, Weinheim (1994)
J.C. Williams: Materials requirements for high-temperature structures in the 21st century. In: R.W. Cahn, A.G. Evans, M. McLean (Hrsg.) High-Temperature Structural Materials, S. 17–31. Chapman & Hall, London (1996)
P. Caron: High \(\gamma^{\prime}\) solvus new generation nickel-based superalloys for single crystal turbine blade applications. In: T.M. Pollock et al. (Hrsg.) Superalloys 2000, S. 737–746. Proc. 9th Int. Symp. on Superalloys, Seven Springs/Pa. The Minerals, Metals & Materials Society, Warrendale/Pa. (2000)
R. Bürgel, P.D. Portella, J. Preuhs: Recrystallization in single crystals of nickel base superalloys. In: T.M. Pollock et al. (Hrsg.) Superalloys 2000, S. 229–238. Proc. 9th Int. Symp. on Superalloys, Seven Springs/Pa. The Minerals, Metals & Materials Society, Warrendale/Pa. (2000)
U. Klotz: Mechanische Eigenschaften und Gefügestabilität von warmfesten 9–12 % Chromstählen mit Mikroduplexstruktur. Dissertation, ETH Zürich (1999)
R. Bürgel, A. Volek, R.F. Singer: The Role of Cobalt in Nickel Base Superalloys. unveröffentlicht
F. Pyczak, H. Mughrabi: An overview of M\({}_{\mathrm{d}}\)-number calculations as a tool for phase stability prediction in Ni-base superalloys. In: D.G. Morris et al. (Hrsg.) Intermetallics and Superalloys, EUROMAT 99 – Bd. 10, S. 47–51. Wiley-VCH/DGM, Weinheim (2000)
H. Biermann: Ursachen und Auswirkungen der gerichteten Vergröberung („Floßbildung“) in einkristallinen Nickelbasis-Superlegierungen. Fortschritt-Berichte VDI, Reihe 5, Nr. 550. VDI Verlag, Düsseldorf (1999)
F.D. Hull: Estimating alloy densities. Met. Prog. Nov. 1969, 139–140 (1969)
A. Volek et al.: Influence of topologically closed packed phase formation on creep rupture life of directionally solidified nickel-base superalloys. Metall. Mater. Trans. A 37A, 405–410 (2006)
N. Saunders, A.P. Miodownik: CALPHAD – Calculation of Phase Diagrams, a Comprehensive Guide. Pergamon, Oxford (1998)
Landolt-Börnstein, Neue Serie, Gruppe III/Bd. 6: Strukturdaten der Elemente und intermetallischen Phasen, S. 471, K.-H. und A.M. Hellwege (Hrsg.) Springer, Berlin (1971)
R. Bürgel et al.: Development of a new alloy for directional solidification of large industrial gas turbine blades. In: K.A. Green et al. (Hrsg.) Superalloys 2004, S. 25–34. Proc. 10th Int. Symp. on Superalloys, Seven Springs/Pa. The Minerals, Metals & Materials Society, Warrendale/Pa. (2004)
R. Bürgel, W. Eßer, M. Ott, D.-Y.F. Roan: Method for restoring the microstructure of a textured article and for refurbishing a gas turbine blade or vane. US-Patent No. US 6,719,853 B2, Apr. 13, 2004
A. Volek: Erstarrungsmikrostruktur und Hochtemperatureigenschaften rheniumhaltiger, stängelkristalliner Nickel-Basis-Superlegierungen. Dissertation, Universität Erlangen-Nürnberg (2002)
M.S.A. Karunaratne et al.: Modelling of the microsegregation in CMSX-4 superalloy and its homogenisation during heat treatment. In: T.M. Pollock et al. (Hrsg.) Superalloys 2000, S. 263–272. Proc. 9th Int. Symp. on Superalloys, Seven Springs/Pa. The Minerals, Metals & Materials Society, Warrendale/Pa. (2000)
R. Bürgel: unveröffentlichte Ergebnisse
T.B. Masalski (Hrsg.): Binary Alloys Phase Diagrams, 2nd edn. ASM International, Ohio (1990)
K. Gebauer: Performance, tolerance and cost of TiAl passenger car valves. Intermetallics 14, 355–360 (2006)
T. Tetsui: Development of an TiAl turbocharger for passenger vehicles. Mater. Sci. Eng. A329-331, 582–588 (2002)
R.L. Kennedy: ALLVAC 718PLUS, superalloy for the next forty years. In: E.A. Loria (Hrsg.) Superalloys 718, 625, 706 and Derivatives 2005, S. 1–14. The Minerals, Metals & Materials Soc., Warrendale/Pa. (2005)
W.-D. Cao: Solidification and solid state phase transformation of Allvac 718Plus alloy. In: E.A. Loria (Hrsg.) Superalloys 718, 625, 706 and Derivatives 2005, S. 165–177. The Minerals, Metals & Materials Soc., Warrendale/Pa. (2005)
E. Erdös et al.: Gefügestabilität von hochwarmfesten Guss- und Schmiedelegierungen auf Ni-Basis. Schlussbericht COST-Aktion 50, Projekt CH 2/1. Gebr. Sulzer (1977)
S. Walston et al.: Joint development of a fourth generation single crystal superalloy. In: K.A. Green et al. (Hrsg.) Superalloys 2004, S. 15–24. Proc. 10th Int. Symp. on Superalloys, Seven Springs/Pa. The Minerals, Metals & Materials Society, Warrendale/Pa. (2004)
S. Lohfeld, M. Schütze: Untersuchung der Eigenschaften von MoSi\({}_{\mathrm{2}}\)-Kompositen in korrosiven und oxidativen Atmosphären. Abschlussbericht BMBF-Projekt Nr. 03 N 2015 C1. DECHEMA, Frankfurt (2001)
D. Blavette, P. Caron, T. Khan: An atom-probe study of some fine scale microstructural features in Ni-base single crystal superalloys. In: D. Duhl et al. (Hrsg.) Superalloys 1988, S. 305–314. The Metall. Soc., Warrendale/Pa.
T. Grosdidier, A. Hazotte, A. Simon: Precipitation and dissolution processes in \(\gamma/\gamma^{\prime}\) single crystal nickel-based superalloys. Mater. Sci. Eng. A256, 183–196 (1998)
L.I. Duarte: Aspectos microestruturais da liga Ti-48Al-2Cr-2Nb. Ciência e Tecnologia dos Materials 15, 105 (2003)
B. Zeumer, G. Sauthoff: Deformation behaviour of intermetallic NiAl–Ta alloys with strengthening laves phase for high-temperature applications III. Effects of alloying with Cr. Intermetallics 6, 451–460 (1998)
P.J. Warren, A. Cerezo, G.D.W. Smith: An atom probe study of the distribution of rhenium in a nickel-base superalloy. Mater. Sci. Eng. A250, 88–92 (1998)
A. Volek et al.: Partitioning of Re between γ and \(\gamma^{\prime}\) phase in nickel-base superalloys. Scr. Mater. 52, 141–145 (2005)
P. Jéhanno et al.: Assessment of the high temperature deformation behaviour of molybdenum. Mater. Sci. Eng. A 463, 216–223 (2007)
M. Krüger et al.: Mechanically alloyed Mo-Si-B alloys with a continous a-Mo matrix and improved mechanical properties. Intermetallics 16, 933–941 (2008)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2015 Springer Fachmedien Wiesbaden
About this chapter
Cite this chapter
Bürgel, R., Maier, H.J., Niendorf, T. (2015). Hochtemperaturlegierungen. In: Handbuch Hochtemperatur-Werkstofftechnik. Springer Vieweg, Wiesbaden. https://doi.org/10.1007/978-3-658-10591-4_6
Download citation
DOI: https://doi.org/10.1007/978-3-658-10591-4_6
Published:
Publisher Name: Springer Vieweg, Wiesbaden
Print ISBN: 978-3-658-10590-7
Online ISBN: 978-3-658-10591-4
eBook Packages: Computer Science and Engineering (German Language)