Abstract
Green manufacturing and eco-efficiency are among the highest priorities of decision makers in today’s manufacturing scenario. Reducing the energy consumption of production processes can significantly improve the environmental performance of the human activity. This paper aims at investigating, according to currently available technologies and to their short-term feasible evolution paths, how the Internet of Things (IoT) paradigm could actually be implemented to increase efficiency in energy consumption, and reducing energy consumption cost.
Chapter PDF
Similar content being viewed by others
References
EIA: Annual Energy Review (2010)
Weinert, N., Chiotellis, S., Seliger, G.: Methodology for planning and operating energy-efficient production systems. CIRP Annals - Manufacturing Technology 60, 41–44 (2011)
Muller, D.C.A., Marechal, F.M.A., Wolewinski, T., Roux, P.J.: An energy management method for the food industry. Applied Thermal Engineering 27, 2677–2686 (2007)
Michaloski, J.L., Shao, G., Arinez, J., Lyons, K., Leong, S., Riddick, F.: Analysis of Sustainable Manufacturing Using Simulation for Integration of Production and Building Service. Compressed Air., 93–101 (2011)
Reich-Weiser, C., Vijayaraghavan, A., Dornfeld, D.: Appropriate use of Green Manufacturing Frameworks. Laboratory for Manufacturing and Sustainability (2010)
Gutowski, T., Dahmus, J., Thiriez, A.: Electrical Energy Requirements for Manufacturing Processes. 13th CIRP International Conference on Life Cycle Engineering (2006)
Park, C., Kwon, K., Kim, W., Min, B., Park, S., Sung, I., Yoon, Y.S., Lee, K., Lee, J., Seok, J.: Energy Consumption Reduction Technology in Manufacturing – A Selective Review of Policies, Standards, and Research. Precision Engineering and Manufacturing 10, 151–173 (2009)
Vijayaraghavan, A., Dornfeld, D.: Automated energy monitoring of machine tools. CIRP Annals - Manufacturing Technology 59, 21–24 (2010)
Karnouskos, S., Colombo, A.W., Martinez Lastra, J.L., Popescu, C.: Towards the energy efficient future factory. In: 2009 7th IEEE International Conference on Industrial Informatics, pp. 367–371 (2009)
Bunse, K., Vodicka, M., Schönsleben, P., Brülhart, M., Ernst, F.O.: Integrating energy efficiency performance in production management – gap analysis between industrial needs and scientific literature. Journal of Cleaner Production 19, 667–679 (2011)
Ikeyama, T., Watanabe, H., Isobe, S., Takahashi, H.: An Approach to Optimize Energy Use in Food Plants. In: SICE Annual Conference, pp. 1574–1579. Waseda University, Tokyo (2011)
Haller, S., Karnouskos, S., Schroth, C.: The Internet of Things in an Enterprise Context. In: Domingue, J., Fensel, D., Traverso, P. (eds.) FIS 2008. LNCS, vol. 5468, pp. 14–28. Springer, Heidelberg (2009)
Atzori, L., Iera, A., Morabito, G.: The Internet of Things: A survey. Computer Networks 54, 2787–2805 (2010)
Subramaniam, S.K., Husin, S.H., Singh, R.S.S., Hamidon, A.H.: Production Monitoring System for Monitoring the Industrial Shop Floor Performance. Int. J. of Systems Applications, Engineering & Development 3, 28–35 (2009)
Meyer, G.G., Wortmann, J.C., Szirbik, N.B.: Production monitoring and control with intelligent products. International Journal of Production Research 49, 1303–1317 (2011)
Poon, T.C., Choy, K.L., Chan, F.T.S., Lau, H.C.W.: A real-time production operations decision support system for solving stochastic production material demand problems. Expert Systems with Applications 38, 4829–4838 (2011)
Meyer, G.G., Främling, K., Holmström, J.: Intelligent Products: A survey. Computers in Industry 60, 137–148 (2009)
Zhang, Y., Qu, T., Ho, O., Huang, G.Q.: Real-time work-in-progress management for smart object-enabled ubiquitous shop-floor environment. International Journal of Computer Integrated Manufacturing 24, 431–445 (2011)
Zhou, S., Ling, W., Peng, Z.: An RFID-based remote monitoring system for enterprise internal production management. The International Journal of Advanced Manufacturing Technology 33, 837–844 (2007)
Huang, G.Q., Zhang, Y.F., Chen, X., Newman, S.T.: RFID-enabled real-time wireless manufacturing for adaptive assembly planning and control. Journal of Intelligent Manufacturing 19, 701–713 (2008)
Chen, R.-S., Tu, M. (Arthur): Development of an agent-based system for manufacturing control and coordination with ontology and RFID technology. Expert Systems with Applications 36, 7581–7593 (2009)
Hameed, B., Khan, I., Durr, F., Rothermel, K.: An RFID based consistency management framework for production monitoring in a smart real-time factory. In: 2010 Internet of Things (IOT), pp. 1–8 (2010)
Wang, B., Cao, Z., Yan, Y., Liu, W., Wang, Z.: Fundamental technology for RFID-based supervisory control of shop floor production system. The International Journal of Advanced Manufacturing Technology 57, 1123–1141 (2011)
Mercatoelettrico.org, http://www.mercatoelettrico.org/En/Default.aspx
ANSI/ ISA: Enterprise-Control System Integration Part 3: Activity Models of Manufacturing Operations Management (2005)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 IFIP International Federation for Information Processing
About this paper
Cite this paper
Miragliotta, G., Shrouf, F. (2013). Using Internet of Things to Improve Eco-efficiency in Manufacturing: A Review on Available Knowledge and a Framework for IoT Adoption. In: Emmanouilidis, C., Taisch, M., Kiritsis, D. (eds) Advances in Production Management Systems. Competitive Manufacturing for Innovative Products and Services. APMS 2012. IFIP Advances in Information and Communication Technology, vol 397. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-40352-1_13
Download citation
DOI: https://doi.org/10.1007/978-3-642-40352-1_13
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-40351-4
Online ISBN: 978-3-642-40352-1
eBook Packages: Computer ScienceComputer Science (R0)