Abstract
Machining of hard-to-machine materials is encountered in many hi-tech areas of industry. One of the most common but also very demanding manufacturing tasks is drilling deep holes of small diameter in materials. In this paper an experimental study of drilling small and deep holes with a continuous abrasive water jet is presented. The abrasive water jet (AWJ) is a process that can be used for drilling a vast variety of materials. The main advantage of the AWJ is the absence of the heat-affected zone and its flexibility. Drilling tests were performed on different materials and the hole depth and diameter were observed at different machining times. It was found that when drilling different materials with a continuous jet, the depth and diameter of the hole increase with a power function. These findings were then used to develop an empirical model for predicting hole depths and diameters at different drilling times.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
Reference
Chelouah R, Siarry P (2000) Tabu search applied to global optimization. Eur J Oper Res 123:256–270
Kovacevic R, Kwak HS, Mohan R (1996) Monitoring of AWJ drilling of ceramics using AE technique. In: Proceedings of the 13th international conference on jet cutting technology, St Andrews, Scotland, September 1996, pp 137–152
Kulekci MK (2002) Processes and apparatus developments in industrial water jet applications. Int J Mach Tool Manuf 42(12):1297–1306
Liaw BM, Kobayashi AS, Emery AF (1986) Effect of loading rates on dynamic fracture of reaction bonded silicon nitride. In: Underwood JH, Chait R, Smith CW, Wilhem DP, Andrews WA, Newman JC (eds) Fracture mechanics: Seventeenth Volume, ASTM STP 905. ASTM, Philadelphia, pp 95–107
Paul S, Hoogstrate AM, van Praag R (2002) Abrasive laminates. Eng Manuf 216:1459–1469
Schopp A, Louis H, Pude F, von Rad C (2003) Influence of abrasive water jet cutting on the magnetic properties of non-oriented electrical steels. J Magn Magn Mater 254–255:370–372
Ye J, Kovacevic R (1999) Turbulent solid–liquid flow through the nozzle of premixed abrasive water jet cutting systems. Inst Mech Eng 223:59–67
Zeng J, Kim TJ (1995) Machinability of engineering materials in abrasive water jet machining. Int J Water Jet Technol 2(2):103–110
Zhang FL (2010) Machining mechanism of abrasive water jet on ceramics. Key Eng Mater 426–427:212–215
Zhang Fenglian (2003) Influence of technological parameters on quality of engineering ceramics processed by means of abrasive water jet. Machinery 4:10–11
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Zhang, Fl., Zhu, J. (2013). An Experimental Study of Drilling Small and Deep Blind Holes with an Abrasive Water Jet. In: Qi, E., Shen, J., Dou, R. (eds) Proceedings of 20th International Conference on Industrial Engineering and Engineering Management. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-40063-6_4
Download citation
DOI: https://doi.org/10.1007/978-3-642-40063-6_4
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-40062-9
Online ISBN: 978-3-642-40063-6
eBook Packages: Business and EconomicsBusiness and Management (R0)