Abstract
The buoyancy-driven natural ventilation was numerically simulated based on computational fluid dynamics (CFD) method in a typical industrial plant with heat source. Heat stress index (HSI) was used to evaluate the thermal environment. The influence of fresh air opening locations, i.e., the distance between fresh air opening and ground, H, on the natural ventilation performance and thermal environment was discussed. Results showed that when the distance between fresh air inlet and ground increased from 0.3 to 1.2 m, the ventilation rate and the air velocity in working zone increased, the convection heat loss from human body changed very slightly, the radiation heat received by human body decreased obviously, and the required sweat rate decreased. The HIS decreased as H increased and the allowed exposure time of workers to continuously work increased. Therefore, when there is a heat source above the ground in the workshop, it is helpful to improve the thermal environment by increasing the distance between the fresh air inlet and ground.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Andersen KT (1995) Theoretical considerations on natural ventilation by thermal buoyancy. Ashrae Trans 101(2):1103–1117
Li Y (2000) Buoyancy-driven natural ventilation in a thermally stratified one-zone building. Build Environ 35:207–214. doi:10.1016/S0360-1323(99)00012-8
Chen ZD, Li Y (2002) Buoyancy-driven displacement natural ventilation in a single-zone building with three-level openings. Build Environ 37:295–303. doi:10.1016/S0360-1323(01)00021-X
Ei-Agou SAZ (2008) The effect of internal heat source and opening locations on environmental natural ventilation. Energy Build 40:409–418. doi:10.1016/j.enbuild.2007.03.009
Letan R, Dubovsky V, Ziskind G (2003) Passive ventilation and heating by natural convection in a multi-storey building. Build Environ 38:197–208. doi:10.1016/S0360-1323(02)00070-7
Koinakis CJ (2005) Combined thermal and natural ventilation modeling for long-term energy assessment: validation with experimental measurements. Energy Build 37:311–323. doi:10.1016/j.enbuild.2004.06.022
Straw MP, Baker CJ, Robertson AP (2000) Experimental measurements and computations of the wind-induced ventilation of a cubic structure. J Wind Eng Ind Aerodyn 88:213–230. doi:10.1016/S0167-6105(00)00050-7
Gan G (2010) Simulation of buoyancy-driven natural ventilation of buildings—impact of computational domain. Energ Build 42:1290–1300. doi:10.1016/j.enbuild.2010.02.022
Gan G (2010) Impact of computational domain on the prediction of buoyancy-driven ventilation cooling. Build Environ 45:1173–1183. doi:10.1016/j.buildenv.2009.10.023
Jiang Y, Chen Q (2001) Study of natural ventilation in buildings by large eddy simulation. J Wind Eng Ind Aerodyn 89:1155–1178. doi:10.1016/S0167-6105(01)00106-4
Fanger PO (1970) Thermal comfort. Danish Technical Press, Copenhagen
Inc Fluent (2005) FLUENT user’s guide. New Hampshire, USA
Shih TH, Liou WW, Shabbir A et al (1995) A new k-ε eddy viscosity model for high Reynolds number turbulent flows. Comput Fluids 24:227–238. doi:10.1016/0045-7930(94)00032-T
Deng G, Zhang D, Li K (2004) Numerical simulation and experimental research of natural ventilation in heat workshop (in Chinese). Build Energ Environ 2(23):70–73
Su Y, Wan X (2012) CFD simulation and retrofit of natural ventilation in a steel workshop. Adv Mater Res 383–390:6608–6613. doi:10.4028/www.scientific.net/AMR.383-390.6608
Sun YJ (1994) Industrial ventilation, 3rd edn. China Architecture & Building Press, Beijing
Zhao HZ (2010) Indoor convection and ventilation. China Architecture & Building Press, Beijing
Belding HS, Hatch TF (1955) Index for evaluating heat stress in terms of resulting physiological strains. Heat Piping Air Cond 27:29–136
Kampmann B, Piekarski C (2000) The evaluation of workplaces subjected to heat stress: can ISO 7933 (1989) adequately describe heat strain in industrial workplaces? Appl Ergon 31:59–71
ISO 7933(1989) Hot environments—analytical determination and interpretation of thermal stress using calculation of required sweat rate. International Organization for Standardization, Geneva
Mehnert P, Brode P, Griefahn B (2002) Gender-related difference in sweat loss and its impact on exposure limits to heat stress. Int J Ind Ergon 29:343–351. doi:10.1016/S0169-8141(02)00073-2
Huang C (2007) Building environment. Mechanical Industry Press of China, Beijing
Acknowledgments
The work was supported by National Natural Science Foundation (No. 51278095) and Shanghai Natural Science Foundation (No.11ZR1401000).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Su, Y., Miao, C. (2014). The Effect of Fresh Air Opening Locations on Natural Ventilation and Thermal Environment in Industrial Workshop with Heat Source. In: Li, A., Zhu, Y., Li, Y. (eds) Proceedings of the 8th International Symposium on Heating, Ventilation and Air Conditioning. Lecture Notes in Electrical Engineering, vol 263. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-39578-9_11
Download citation
DOI: https://doi.org/10.1007/978-3-642-39578-9_11
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-39577-2
Online ISBN: 978-3-642-39578-9
eBook Packages: EngineeringEngineering (R0)