Abstract
Failure analysis is needed as a diagnostic tool to assess the sequence of primary, secondary and perhaps tertiary damage of different parts in a damaged system. This is a prerequisite to identify the contributing causes and the root cause for the causal failure.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
German Federal Network Agency: Report on the supply disruptions in the ruled area of RWE in Münsterland on 25, Nov 2005 (2006)
Albermani, F., Kitipornchai, S., Chan, R.: Failure analysis of transmission towers. Eng. Fail. Anal. 16, 1922–1928 (2009)
Rao, G.P., Lakshmanan, N., Iyer, N.R.: Investigation of transmission line tower failures. Eng. Fail. Anal. 17, 1127–1141 (2010)
Pohlmann, H.: Schadensanalyse, Resttragfähigkeit und Sanierungskonzepte von Hochspannungs-Freileitungsmasten (1996)
Helms, R., Kühn, H.-D., Martin, E.: Safety against brittle fracture of structural steelwork elements with punched holes. Arch. Eisenhüttenwes. 44, 917–926 (1973)
Rao, R.P., Rokade, R., Mohan, S.: Analytical and experimental studies on 400 and 132 kV steel transmission poles. Eng. Fail. Anal. 18, 1018–1029 (2011)
Moon, B.-W.B.-W., Park, J.-H., Lee, S.-K., Kim, J., Kim, T., Min, K.-W.: Performance evaluation of a transmission tower by substructure test. J. Constr. Steel Res. 65, 1–11 (2009)
Lacalle, R., Cicero, S., Álvarez, J., Cicero, R., Madrazo, V.: On the analysis of the causes of cracking in a wind tower. Eng. Fail. Anal. 18, 1698–1710 (2011)
Chou, J.-S., Tu, W.-T.: Failure analysis and risk management of a collapsed large wind turbine tower. Eng. Fail. Anal. 18, 295–313 (2011)
Baer, W.: Zur Alterung von Thomasstählen. MP Mater. Testing 49, 37–47 (2007)
Dick, W.: Die Thomasstähle. Härterei-Technische Mitteilungen 2, 100–109 (1943)
Stolte, E., Heller, W.: Present state of our knowledge on ageing of steels. Part I. Underlaying principles. Stahl U. Eisen 90, 861–868 (1970)
Heller, W., Stolte, E.: Present state of our knowledge on ageing of steels. Part II. Effects of ageing on steels. Stahl U. Eisen 90, 909–916 (1970)
Felix W.: Investigation of natural and artificial ageing of general construction steels. Arch. Eisenhüttenwes. 36, 35–41 (1965)
Verein Deutscher Eisenhüttenleute (ed.) Werkstoffkunde Stahl, Band 1. Springer, Grundlagen (1984)
Dahl, W., Lenz, E.: Effect of manganese content on quench ageing and strain ageing of carbon and/or nitrogen. Arch. Eisenhüttenwes. 46, 119–125 (1975)
DIN EN 10002-1, Metallic materials–Tensile testing–Part 1: Method of test at ambient temperature (2001)
VDE 0210 Rules for the design of Overhead electrical transmission lines (1958)
DIN EN 50341-1: Overhead electrical lines exceeding AC 45 kV–Part 1: General requirements-Common specifications (2002)
Export Report of Federal Institute for Materials Research and Testing BAM: Failure Analysis on transmission towers failed in the Münsterland, BAM, Berlin (2006)
DIN EN 50341-3-4: Overhead electrical lines exceeding AC 45 kV–Part 3: national normative aspects (NNA) (2001)
VDE-AR-N 4210-3: Test and evaluation methods for determining the load capacity of structural members made of Thomas steel in steel lattice overhead line towers with nominal voltages of 110 kV and above (2011)
DIN EN 50341-1: Overhead electrical lines exceeding AC 45 kV–Part 1: General requirements-common specifications (2010)
Expert report of Federal Institute for Materials Research and Testing BAM: “Gutachten BAM-V.3/566: Schadensanalyse an der gebrochenen Radsatzwelle 2660419 der BR 403 ICE 3”.- BAM, Berlin, 2009-03-09 unpublished
Klinger, C.,Bettge, D., Häcker, R., Heckel, T., Gohlke, D., Klingbeil D.: Failure analysis on a broken ICE3 railway axle—Interdisciplinary approach. In: Beretta, S. (ed.) Proceedings ESIS TC 24 “Railway structures” Workshop on “Fatigue Strength and Fatigue Life of Railway Axles”, Berlin, 10 Oct 2010
EBA-Report 2008, Page 10 http://www.eba.bund.de/SharedDocs/Publikationen/DE/Infothek/Allgemeines/Sicherheitsberichte/sicherheitsbericht__2008,templateId=raw,property=publicationFile.pdf/sicherheitsbericht_2008.pdf
ISO 4967:1998: Steel—Determination of content of non-metallic inclusions—Micrographic method using standard diagrams (1998)
EN 13261: Railway applications. Wheelsets and bogies. Axles product requirements, Annex A. European Committee for Standardization (CEN), Brussels, Belgium
ISO 4967:1988 Steel—Deter¬mination of content of non-metallic inclusions—Micrographic method using standard diagrams
Murtaza, G., Akid, R.: Empirical corrosion fatigue life prediction models of a high strength steel. Eng. Fracture Mech. 67, 461–474 (2000)
Zhang, J.M., Li, S.X., Yang, Z.G., Li, G.Y., Hui, W.J., Weng, Y.Q.: Influence of inclusion size on fatigue behaviour of high strength steels in the gigacycle fatigue regime. Int. J. Fatigue 29, 765–771 (2007)
Liu, Y.B., Yang, Z.G., Li, Y.D., Chen, S.M., Hui, W.J. Weng, Y.Q.: Dependence of fatigue strength on inclusion size for high-strength steels in very high cycle fatigue regime. Mat. Sci. Eng. A, A517, 180–184 (2009)
Ma, J., Zhang, D., Han, E.-H., Ke, W.: Effects of inclusion and loading direction on the fatigue behaviour of hot rolled low carbon steel. Int. J. Fatigue 32, 1116–1125 (2010)
Pessard, E., Morel, F., Morel, A., Bellett, D.: Modelling the role of non-metallic inclusions on the anisotropic fatigue behaviour of forged steel. Int. J. Fatigue 33, 568–577 (2011)
Murakami, Y., Endo, T.: Effects of small defects on fatigue strength of metals. Int. J. Fatigue 1, 23–30 (1980)
Murakami, Y., Usuki, H.: Quantitative evaluation of effects of non-metallic inclusions on fatigue strength of high strength steels. II: Fatigue limit evaluation based on statistics for extreme values of inclusion size. Int. J. Fatigue 11, 299–307 (1989)
Murakami, Y., Kodama, S., Konuma, S.: Quantitative evaluation of effects of non-metallic inclusions on fatigue strength of high strength steels. I: Basic fatigue mechanism and evaluation of correlation between the fatigue fracture stress and the size and location of non-metallic inclusions. Int. J. Fatigue 11, 291–298 (1989)
Murakami, Y., Endo, M.: Effects of defects, inclusions and inhomogeneities on fatigue strength. Inter. J. Fatigue 16, 163–182 (1994)
Zhang, J.M., Zhang, J.F., Yang, Z.G., Li, G.Y., Yao, G., Li, S.X., Hui, W.J., Weng, Y.Q.: Estimation of maximum inclusion size and fatigue strength in high-strength ADF1 steel. Mater. Sci. Eng. A394, 126–131 (2005)
Wang, Q.Y., Bathias, C., Kawagoishi, N., Chen, Q.: Effect of inclusion on subsurface crack initiation an gigacycle fatigue strength. Int. J. Fatigue 24, 1269–1274 (2002)
Ekengren, J., Kazymyrovych, V., Burman, C., Bergström, J.: Relating gigacycle fatigue to other methods in evaluating the inclusion distribution of a H13 tool steel. Fourth Int. Conf. Very High Cycle Fatig. 4, 45–50 (2007)
Murakami, Y.: Effects of non-metallic inclusions on fatigue strength. In: Murakami, Y. (ed.) Metal Fatigue: Effects of Small Defects and Non-Metallic Inclusions, pp. 75–127. Elsevier, Amsterdam (2002). (Chapter 6)
Sakai, T.: Review and prospects for current studies on very high cycle fatigue of metallic materials for machine structural use. Fourth Int. Conf. Very High Cycle Fatig. 4, 3–12 (2007)
Yang, Z.G., Zhang, J.M., Li, S.X., Li, G.Y., Wang, Q.Y., Hui, W.J., Weng, Y.Q.: On the critical inclusion size of high strength steels under ultra-high cycle fatigue, Mater. Sci. Eng. A427, 167–174 (2006)
Yang, Z.G., Zhanga, J.M., Lia, S.X., Lia, G.Y., Wanga, Q.Y., Huib, W.J., Weng, Y.Q.: The fatigue behaviours of zero-inclusion and commercial 42CrMo steels in the super-long fatigue life regime. Acta Mater. 52, 5235–5241 (2004)
Zerbst et al.: Safe life and damage tolerance aspects of railway axles—A review. EFM 2012 paper to be published
Lange, G.: Technische Schadensfälle, 5. Wiley VCH, Auflage (2001)
Erscheinungsformen von Rissen und Brüchen metallischer Werkstoffe, Verlag Stahleisen, 1996
Bargel, H.-J., Schulze,G.: Werkstoffkunde.- Berlin, Schroedel, 1978, S. 359–360 basierend auf: Wohler, H.: Prüfbericht 1.2/11323, Schwingbruch einer Kurbelwelle aufgrund nichtmetallischer Einschlüsse.- BAM-Berlin 1977 (unveröffentlicht)
Gohlke, D., Behrendt, B., Matthies, K., DiIorio, I.: Lösungsansätze für die Bewertung kleinster Fehlstellen in Superlegierungen.–DGZfP-Jahrestagung 1999—Celle, 10.-12.Mai 1999, Berichtsband Nr. 86, Band 2, Seite 599–613
Matthies, K., Ernst, H., Gieschler, W.: Bestimmung des mikroskopischen Reinheitsgrades von Stählen mit Ultraschall, Berichtsband 80 (CD) der DGZFP-Jahrestagung 2002, 6–8. Mai 2002 in Weimar
Klinger, C., Bettge, D., Heckel, T.: Outcome of the cologne accident investigation. Presentation on: WOALXIM Kick off meeting TWI LIMITED Granta Park, Great Abington CAMBRIDGE, UNITED KINGDOM, 22 Nov 2010
Zerbst, U., Beretta, S., Klinger, C., Klingbeil, D.: Structural assessment of railway axles—A critical review.- EFA 2012 paper to be published (2012)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Klinger, C. (2013). Failure Analysis: Case Studies. In: Czichos, H. (eds) Handbook of Technical Diagnostics. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-25850-3_18
Download citation
DOI: https://doi.org/10.1007/978-3-642-25850-3_18
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-25849-7
Online ISBN: 978-3-642-25850-3
eBook Packages: EngineeringEngineering (R0)