Abstract
We can use a common definition which says that when a force is applied to a mechanical system, it will typically reach steady state after going through a few transient behaviors. The difference in performance between a stabilized and a transient mechanical system may be substantial. Loss of power during vehicle acceleration may be determined with a roller dynamometer. In this paper we determine the power loss in the car transmission as well as the power loss taking rolling resistance into consideration, in the transient acceleration mode, up to the maximum speed of the vehicle. We also highlight the speed performance values in comparison with the values given by the manufacturer with a view to ensuring the accuracy of transmission loss results.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
https://www.tut.fi/ms/muo/vert/11_tyre_as_car_component/rolling_velocity.htm. Accessed 02 Nov 2018
Langhart, J.: How to get the most realistic efficiency calculation for gearboxes. Power Trans. Eng. (2015)
Andersson, M.: Churning losses and efficiency in gearboxes. Licentiate thesis, Royal Institute of Technology, Stockholm (2014)
Mitschke, M., Wallentowitz, H.: Dynamik der Kraftfahrzeuge. Springer, Berlin (2004)
Drivetrain Power Loss—The 15% ‘Rule’—Modified Magazine. Accessed 02 Nov 2018
Höhn, B.R., Michaelis, K., Wimmer, A.: Low loss gears. J. Gear Manuf. 24, 28–35 (2007)
Magalhães, L., Martins, R., Locateli, C., Seabra, J.: Influence of tooth profile and oil formulation on gear power loss. Tribol. Int. 43, 1861–1871 (2010)
ISO/TR 14179-2: Gears — Thermal Capacity/Part 2. Thermal Load-Carrying Capacity, Technical Report (2001)
Schlegel, C., Hösl, A., Diel, S.: Detailed loss modelling of vehicle gearboxes. In: Proceedings 7th Modelica Conference, Como, Italy, 20–22 Sept (2009)
Irimescu, A., Mihon, L., Pădure, G.: Automotive transmission efficiency measurement using a chassis dynamometer. Int. J. Autom. Technol. 12(4), 555–559 (2011)
Meyerk, M.: Vehicle Dynamics, p. 16. Wiley, London (2015)
Vacca, F.: On the energy efficiency of dual clutch transmissions and automated manual transmissions. Energies 10, 1562 (2017)
Höhn, B.R., Michaelis, K., Otto, H.P.: Flank load carrying capacity and power loss reduction by minimized lubrication. Gear Technol. 53–62 (2008)
Seetharaman, S., Kahraman, A., Moorhead, M.D., Petry-Johnson, T.T.: Oil churning power losses of a gear pair: experiments and model validation. J. Tribol. 131, 022202 (2009)
Michaelis, K., Höhn, B.-R., Hinterstoißer, M.: Influence factors on gearbox power loss. Ind. Lubr. Tribol. 63, 46–55 (2011)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Adrian, S., Adrian, B., Vlad, M. (2019). Determination of Some Vehicle Dynamic Performances Using the Dynamometric Roller Chassis. In: Burnete, N., Varga, B. (eds) Proceedings of the 4th International Congress of Automotive and Transport Engineering (AMMA 2018). AMMA2018 2018. Proceedings in Automotive Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-94409-8_83
Download citation
DOI: https://doi.org/10.1007/978-3-319-94409-8_83
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-94408-1
Online ISBN: 978-3-319-94409-8
eBook Packages: EngineeringEngineering (R0)