Abstract
The measuring system based on subminiature eddy-current transducers has been developed to carry out local investigations of aluminum-magnesium alloy plates for flaws. The Delianna filter has been modified to allow the significant increase of signal-to-noise ratio. A scheme that uses a computer as a generator and receiver of signals from windings is proposed. It is capable of automatically changing the filtering cutoff frequency and operating frequency of the device. The transducer has been tested on a number of aluminum-magnesium alloy plates with flaws. The article presents data on the relationship of eddy-current transducer response to the presence of flaws in alloys as hidden holes at signal frequencies comprised between 300–700 Hz on an exciting winding.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Hohmann, R., Lomparski, D., Krause, H.-J., Kreutzbruck, M.V., Becker, W.: Aircraft wheel testing with remote eddy current technique using a HTS SQUID magnetometer. IEEE Trans. Appl. Supercond. 11(1), 1279–1282 (2001)
Gabor, V., Antal, G.: Nondestructive material evaluation by novel electromagnetic methods. Mater. Sci. Forum 414–415, 343–352 (2004)
Allweins, K., Gierelt, G., Krause, H.-J., Kreutzbruck, M.V.: Defect detection in thick aircraft samples based on HTS SQUID-magnetometry and pattern recognition. IEEE Trans. Appl. Supercond. 13(2), 250–253 (2003)
Hesse, O., Pankratyev, S.: Usage of magnetic field sensors for low frequency eddy current testing. Meas. Sci. Rev. 5, 86–93 (2005)
Lemeshko, M.A., Adigamov, K.A., Osackiy, S.S.: RU Patent 2200299
Wang, J., Fu, Y., Sun, M., Liu, Z., Fan, Z., Shi, K.: Thickness measurement of ferromagnetic material based on pulsed eddy current testing technology. J. Beijing Jiaotong Univ. 36, 133–136 (2012)
Lee, K.H., Baek, M.K., Park, I.H.: Estimation of deep defect in ferromagnetic material by low frequency eddy current method. IEEE Trans. Magn. 48, 3965–3968 (2012)
Kluev, V.V.: Non-destructive testing, vol. 1 (2008)
Zhang, D., Li, H., Chen, Z., Wang, Z.: Applications of multi-frequency inversion algorithm to quantitative NDE of cracks in welding joints of a metallic lattice sandwich plate. Int. J. Appl. Electromagn. Mach. 39, 137–143 (2012)
Shaternikov, V.: The interaction of electromagnetic fields with complex shapes converters conductive bodies. Russ. J. Nondestruct. Test 2, 54–63 (1977)
Bizyulev, A., Muzhitskii, V.: Eddy current flaw detector WA-12 NFP and processing methods of the measured signal from the defect. Russ. J. Nondestruct. Test 5, 85–91 (2004)
Zagidulin, R., Muzhitskii, V.: Determination of geometrical parameters of continuity defect in a ferromagnetic plate by minimizing the smoothing functional. Part 2. The results of evaluating the continuity of the defect parameters. Russ. J. Nondestruct. Test 10, 13–19 (2001)
Shkarlet, Y.: Basic theory and models of overhead electromagneto elasticity electromagnetic acoustic transducers. Russ. J. Nondestruct. Test 2, 39–45 (2004)
Lunin, V., Zhdanov, A., Lazutkin, D.: A neural-network classifier of flaws for multifrequency eddy-current tests of heat-exchange pipes. Russ. J. Nondestruct. Test 3, 37–45 (2007)
Shekhar, H., Polikar, R., Ramuhalli, P., Liu, X., Udpa, L., Udpa, S.: Dynamic thresholding for automated analysis of bobbin probe eddy current data. Int. J. Appl. Electromagn. Mech. 15, 39–46 (2003)
Egorov, A., Polyakov, V., Kolubaev, A., Pirogov, A.: Multi-frequency eddy current testing of aluminum alloys. Izv. Altai State Univ. 81, 176–180 (2014)
Dmitriev, S., Katasonov, A., Malikov, V., Sagalakov, A.: Flaw detection of alloys using the eddy current method. Russ. J. Nondestruct. Test 52, 32–37 (2016)
Dmitriev, S., Ishkov, A., Malikov, V., Sagalakov, A., Katasonov, A.: Non-destructive testing of the metal-insulator-metal using miniature eddy current transducers. IOP Conf.: Ser. Mater. Sci. Eng. 71, 1–6 (2015)
Dmitriev, S., Malikov, V., Sagalakov, A., Shevtsova, L., Katasonov, A.: Subminiature eddy current transducers for studying semiconductor material. J. Phys.: Conf. Ser. 643, 1–7 (2015)
Malikov, V., Davydchenko, M., Dmitriev, S., Sagalakov, A.: Subminiature eddy-current transducers for conductive materials research. In: International Conference on Mechanical Engineering, Automation and Control Systems, Tomsk, pp. 1–4 (2015)
Dmitriev, S., Katasonov, A., Malikov, V., Sagalakov, A.: Eddy-current measuring system for analysis of alloy defects and weld seams. Russ. Eng. Res. 36, 626–629 (2016)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG
About this paper
Cite this paper
Dmitriev, S., Ishkov, A., Katasonov, A., Malikov, V., Sagalakov, A. (2018). Subminiature Eddy-Current Transducers for Conductive Materials and Layered Composites Research. In: Murgul, V., Popovic, Z. (eds) International Scientific Conference Energy Management of Municipal Transportation Facilities and Transport EMMFT 2017. EMMFT 2017. Advances in Intelligent Systems and Computing, vol 692. Springer, Cham. https://doi.org/10.1007/978-3-319-70987-1_70
Download citation
DOI: https://doi.org/10.1007/978-3-319-70987-1_70
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-70986-4
Online ISBN: 978-3-319-70987-1
eBook Packages: EngineeringEngineering (R0)