Abstract
Degradation processes of implant materials have a significant effect on the reactions taking place around them. Processes related to mechanical wear, corrosion and tribological wear can be distinguished here. The phenomenon of fretting has a particularly significant impact on changes around the implant. The fretting process has a mechanism specific to it, based on simultaneous joining and intensive oxidation. This paper presents a new method for fretting wear assessment was developed, based on the application of an Olympus Lext OLS4000 confocal laser scanning microscope in tests. The main advantage of the described method is that measurements can be performed in three dimensions at very high resolution. However the greatest innovation of this method of fretting wear testing is the capability of inputting digital threshold values of a given sample’s profile. This allows for easy differentiation between material depleted and accrued as a result of fretting.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Cai Z., Zhu M., Shen H., Zhou Z., Jin X.: Torsional fretting wear behaviour of 7075 aluminium alloy in various relative humidity environments, WearÂă267, 330–339 (2009).
Done V., Kesavan D., Krishna M.R., Chaise T., Nelias D.: Semi analytical fretting wear simulation including wear debris. Tribology International 109, 1–9 (2017).
Duisabeau L., Combrade P., Forest B.: Environmental effect on fretting of metallic materials for orthopedic implants, Wear 256, 805–816 (2004).
Ebara R., Fujimura M.: Fretting fatigue behavior of Ti-6Al-4V alloy under plane bending stress and contact stress, Wear 39, 1181–1186 (2006).
Everitt N.M., Ding J., Bandak G., Shipway P.H., Leen S.B., Williams E.J.: Characterization of fretting-induced wear debris for Ti-6Al-4 V, Wear 267, 283–291 (2009).
Gao S., Cai Z., Quan X., Zhu M., Yu H.: Comparison between radial fretting and dual-motion fretting features of cortical bone. Wear 43, 440–446 (2010).
Garcin S., Fouvry S., Heredia S.: A FEM fretting map modeling: Effect of surface wear on crack nucleation. Wear 330âĂŞ331, 145–159 (2015).
Gebretsadik D.W., Hardell J.: Prakash B.: Friction and wear characteristics of different Pb–free bearing materials in mixed and boundary lubrication regimes. Wear 340–341, 63–72 (2015).
Geringer J., Pellier J., Cleymand F., Forest B.: Atomic force microscopy investigations on pits and debris related to fretting-corrosion between 316L SS and PMMA.Wear 292–293, 207–217 (2012).
Hallab N.J., Messina C., Skipor A., Jacobs J.J.: Differences in the fretting corrosion of metal-metal and ceramic-metal modular juctios of total hip replacements, Journal of Orthopedics Research 22, 250–259 (2004).
Hebda M., Wachał A. (1980), Trybologia, Wydawnictwa Naukowo-Techniczne Warszawa, ISBN 83-204-0043-0.
Heinrichs J., Olsson M., Jacobson S.: New understanding of the initiation of material transfer and transfer layer build-up in metal forming. In situ studies in the SEM. Wear 292âĂŞ293, 61–73 (2012).
Kulesza E., DÄĔbrowski J.R., Sidun J., Neyman A., Mizera J.: Fretting wear of materials – methodological aspects of research. Acta Mechanica at Automatica 6 no.3, 58–61 (2012).
Kumar S., Narayanan T.S.N.S., Raman S.G.S., Seshadri S.K:, Evaluation of fretting corrosion behaviour of CP-Ti orthopaedic implant applications, Tribology International 43, 1245–1252 (2017).
Neyman A.: Fretting w elementach maszyn, GdaÅĎsk (2003), ISBN 83-7348-048.
Pellier J., Geringer J., Forest B.: Fretting-corrosion between 316L SS and PMMA: influence of ionic strength, protein and electrochemical conditions on material wear. Application to orthopedic implants, Wear 271, 1563–1571 (2011).
Pereira K., Yue T., AbdelWahab M.: Multiscale analysis of the effect of roughness on fretting wear. Tribology International 110, 222–231 (2017).
Sivakumar M., Shanadurai K.S.K., Rajeswari S., Thulasiraman V.: Failures in stainless steel orthopaedic implant devices: A survey, Journal of Materials Science Letters 14, 351–354 (1995).
Tritschler B.: Forest B.: Rieu J.: Fretting corrosion of materials for orthopaedic implants: a study of a metal/polymer contact in an artificial physiological medium, Tribology International 32, 587–596 (1999).
Vadiraj A., Kamaraj M.: Effect of surface treatments on fretting fatigue damage of biomedical titanium alloys, Tribology International 40, 82–88 (2007).
Yu H.Y., Quan H.X., Cai Z.B., Gao S.S., Zhu M.H.: Radial fretting behavior of cortical bone against titanium, Tribology Letters 31, 69–76 (2008).
Zhu M.H., Yu H.Y., Zhou Z.R: Radial fretting behaviours of dental ceramics, Tribology International 39, 1255–1261 (2006).
Zhu M.H., Zhou Z.R.: On the mechanisms of various fretting wear modes, Tribology International 44, 1378–1388 (2011).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG
About this paper
Cite this paper
Sidun, J., Dąbrowski, J.R. (2018). The method of fretting wear assessment with the application of 3D laser measuring microscope. In: Gzik, M., Tkacz, E., Paszenda, Z., Piętka, E. (eds) Innovations in Biomedical Engineering . IBE 2017. Advances in Intelligent Systems and Computing, vol 623 . Springer, Cham. https://doi.org/10.1007/978-3-319-70063-2_39
Download citation
DOI: https://doi.org/10.1007/978-3-319-70063-2_39
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-70062-5
Online ISBN: 978-3-319-70063-2
eBook Packages: EngineeringEngineering (R0)