Abstract
This work deals on the design of a multisensorial anemometer able to provide an accurate measurement of both wind speed and direction. The system is based on thermal anemometry that is, probably, the preferable way to measure instantaneous wind velocity in any weather condition and surrounding. The application here proposed is based on a commercial flow probe, the IST FS5 that shows a robust design without moving parts, small dimensions and is suitable to operate up to 150 °C and a wind speed of 100 m/s. In addition, the sensor is organized as a pattern of probes. In this way, being the analysis based on differential measurements, analyzing the signal provided by each sensor is possible to perform an accurate evaluation of both the wind speed and direction. A microcontroller realizes the data management and wind flow identification process.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
F. Feyzi, M. Kornberger, N. Rachor, B. Ilk, Development of two multisensor hot-film measuring techniques for free-flight experiments, in ICIASF’89 Record. International Congress on Instrumentation in Aerospace Simulation Facilities, 1989 (Gottingen, 1989), pp. 443–449
T.S.J. Lammerink, N.R. Tas, G.J.M. Krijnen, M. Elwenspoek, A new class of thermal flow sensors using ΔT = 0 as a control signal, in MEMS 2000. The Thirteenth Annual International Conference on Micro Electro Mechanical Systems, 2000 (Miyazaki, 2000), pp. 525–530
J.P. Rodriguez, C.R. Perez, Advanced sensor for optimal orientation and predictive maintenance of high power wind generators, in IECON 02. IEEE 2002 28th Annual Conference of the Industrial Electronics Society, vol. 3, 2002, pp. 2167–2172
B.A.J. Hernandez, E.M. Hernandez, J.Y.M. Perez, M.R.C. Lopez, Arrangement of temperature sensors as a wind sensor, in 2006 3rd International Conference on Electrical and Electronics Engineering (Veracruz, 2006), pp. 1–4
H.I. Schlaberg, Y. Liu, Z. Li, S. Liu, Wind speed and direction measurement with narrowband ultrasonic sensors using dual frequencies, Renewable Power Generation Conference (RPG 2013), 2nd edn. (IET, Beijing, 2013), pp. 1–4
M. Ghassemi, M. Farzaneh, Coupled computational fluid dynamics and heat transfer modeling of the effects of wind speed and direction on temperature increase of an ice-covered FRP live-line tool. IEEE Trans. Power Delivery 30(5), 2268–2275 (2015)
B.A.J. Hernandez, E.M. Hernandez, J.Y.M. Perez, M.R.C. Lopez, Arrangement of temperature sensors as a wind sensor, in 2006 3rd International Conference on Electrical and Electronics Engineering, 6–8 Sept 2006, pp. 1–4
K. Okamoto, T. Ohhashi, M. Asakura, K. Watanabe, A digital anemometer, in Instrumentation and Measurement Technology Conference, 1993. IMTC/93. Conference Record, IEEE, 18–20 May 1993, pp. 59–63
Flow Sens FS5/FS5A thermal mass flow sensor for all-purpose use in gases, IST AG technical paper
FS5 thermal mass flow sensor for various gas flow applications, IST AG datasheet
P. Branchi, L. Pantoli, V. Stornelli, G. Leuzzi, RF and microwave high-Q floating active inductor design and implementation. Int. J. Circuit Theory Appl. 43(8), 1095–1104 (2015)
L. Pantoli, V. Stornelli, G. Leuzzi, Class AB tunable active inductor. Electron. Lett. 51(1), 65–67 (2015)
L. Pantoli, V. Stornelli, G. Leuzzi, Tunable active filters for RF and microwave applications. J. Circuits Syst. Comput. 23, 1450088 (2014)
L. Pantoli, V. Stornelli, G. Leuzzi, Low voltage high-order agile active filter for microwave applications, in 2013 European Microwave Conference (EuMC) (Nuremberg, 2013), pp. 1203–1206
V. Stornelli, L. Pantoli, G. Leuzzi, G. Ferri, Fully differential DDA based fifth and seventh order Bessel low pass filters and buffers for DCR radio systems. Analog Integr. Circ. Sig. Process. 75(2), 305–310 (2013)
L. Pantoli, V. Stornelli, G. Leuzzi, A single-transistor tunable filter for Bluetooth applications, in 2012 7th European Microwave Integrated Circuits Conference (EuMIC) (Amsterdam, 2012), pp. 889–892
L. Pantoli, V. Stornelli, G. Leuzzi, Low-noise tunable filter design by means of active components. Electron. Lett. 52(1), 86–88 (2016)
V. Stornelli, Low voltage low power fully differential buffer. J. Circuits Syst. Comput. 18(3), 497–502 (2009)
G. Ferri, V. Stornelli, A. di Simone, A CCII-based high impedance input stage for biomedical applications. J. Circuits Syst. Comput. 20(8), 1441–1447 (2011)
V. Stornelli, G. Ferri, A 0.18 μm CMOS DDCCII for portable LV-LP filters. Radioengineering 22(2), 434–439 (2013)
G. Ferri, V. Stornelli, A. Celeste, Integrated rail-to-rail low-voltage low-power enhanced DC-gain fully differential operational transconductance amplifier. ETRI J. 29(6), 785–792 (2007)
G. Leuzzi, V. Stornelli, L. Pantoli, S. Del Re, Single transistor high linearity and wide dynamic range active inductor. Int. J. Circuit Theory Appl. 43(3), 277–285 (2015)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG
About this paper
Cite this paper
Pantoli, L., Paolucci, R., Muttillo, M., Fusacchia, P., Leoni, A. (2018). A Multisensorial Thermal Anemometer System. In: Andò, B., Baldini, F., Di Natale, C., Marrazza, G., Siciliano, P. (eds) Sensors. CNS 2016. Lecture Notes in Electrical Engineering, vol 431. Springer, Cham. https://doi.org/10.1007/978-3-319-55077-0_42
Download citation
DOI: https://doi.org/10.1007/978-3-319-55077-0_42
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-55076-3
Online ISBN: 978-3-319-55077-0
eBook Packages: EngineeringEngineering (R0)