Skip to main content
SpringerLink
Log in

The CRC666 Approach: Realizing Optimized Solutions Based on Production Technological Innovation

  • Chapter
  • First Online:
Manufacturing Integrated Design

  • 1047 Accesses

Abstract

Finding technical solutions for given problems is one of a designer’s key challenges. The task is especially demanding since the designer tries to find not only one possible solution but also the best possible solution, taking all existing conditions, limitations, and requirements into account (Pahl et al. 2007). There are many product development approaches that support the designer in this. The focus and drivers of the approaches differ:

  • Reduction of complexity (Suh 1998)

  • Integration of product development in company processes (Ehrlenspiel and Meerkamm 2013)

  • Methodical approach based on analysis and synthesis steps (VDI 2221 1993)

  • Cross-domain development of systems with a focus on mechatronic systems (VDI 2206 2004)

  • Sustainable product design (Birkhofer et al. 2012)

  • Effectiveness and efficiency (Lindemann 2009)

  • Flexibility (Lindemann 2009)

  • Cost and time reduction; quality improvement (Eder and Hosnedl 2010)

  • Computer-aided automatization (Weber 2005)

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Log in via an institution
eBook
USD 16.99
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book
USD 99.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info
Hardcover Book
USD 139.99
Price excludes VAT (USA)
  • Durable hardcover edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

References

  • Adamy J (2011) Fuzzy Logik, Neuronale Netze und Evolutionäre Algorithmen. Shaker Verlag, Aachen

    Google Scholar 

  • Agapiou J (1992) The optimization of machining operations based on a combined criterion, part 1: the use of combined objectives in single-pass operations. J Eng Ind 114(4):500–507

    Article  Google Scholar 

  • Alla A, Hinze M, Lass O, Ulbrich S (2015) Model order reduction approaches for the optimal design of permanent magnets in electro-magnetic machines. IFAC-PapersOnLine 48(1):242–247

    Article  Google Scholar 

  • Beyer HG, Sendhoff B (2007) Robust optimization—a comprehensive survey. Comput Methods Appl Mech Eng 196(33–34):3190–3218

    Article  Google Scholar 

  • Biegler LT (2010) Nonlinear programming: concepts, algorithms, and applications to chemical processes. SIAM, Philadelphia

    Book  Google Scholar 

  • Birkhofer H, Wäldele M (2008) Properties and characteristics and attributes and…: an approach on structuring the description of technical systems. In: Vanek V, Hosnedl S, Bartak J (eds) Proceedings of AEDS 2008 Workshop. Pilsen, pp 19–34

    Google Scholar 

  • Birkhofer H, Rath K, Thao S (2012) Umweltgerechtes Konstruieren. In: Rieg F, Steinhilper R (eds) Handbuch Konstruktion. Hanser, München

    Google Scholar 

  • Bixby RE (2002) Solving real-world linear programs: a decade and more of progress. Oper Res 50(1):3–15

    Article  Google Scholar 

  • Conn AR, Scheinberg K, Vicente LN (2009) Introduction to derivative-free optimization. SIAM, Philadelphia

    Book  Google Scholar 

  • Din 8580 (2003) Deutsches Institut für Normung e. V: Fertigungsverfahren—Begriffe, Einteilung

    Google Scholar 

  • Eder WE, Hosnedl S (2010) Introduction to design engineering: systematic creativity and management. CRC Press/Balkema, Leiden

    Book  Google Scholar 

  • Ehrlenspiel K, Meerkamm H (2013) Integrierte Produktentwicklung: Denkabläufe, Methodeneinsatz, Zusammenarbeit, 5. überarb. und erw. Auflage. Hanser, München

    Google Scholar 

  • Fritz AH, Schulze G (2008) Fertigungstechnik. Springer, Berlin

    Book  Google Scholar 

  • Gramlich S (2013) Vom fertigungsgerechten Konstruieren zum produktionsintegrierenden Entwickeln: Durchgängige Modelle und Methoden im Produktlebenszyklus. Fortschritt-Berichte VDI, Konstruktionstechnik/Maschinenelemente, vol 423. VDI-Verlag, Düsseldorf

    Google Scholar 

  • Groche P, Scheitza M, Kraft M, Schmitt S (2010) Increased total flexibility by 3D Servo Presses. CIRP Ann Manuf Technol 59(1):267–270

    Article  Google Scholar 

  • Groche P, Schmitt W, Bohn A, Gramlich S, Ulbrich S, Günther U (2012) Integration of manufacturing-induced properties in product design. CIRP Ann 61(1):163–166

    Article  Google Scholar 

  • Grote K-H, Antonsson EK (eds) (2009) Springer handbook of mechanical engineering. Springer, Berlin

    Google Scholar 

  • Heidemann B (2001) Trennende Verknüpfung: Ein Prozessmodell als Quelle für Produktideen. Fortschritt-Berichte VDI, Konstruktionstechnik/Maschinenelemente, vol 351. VDI-Verlag, Düsseldorf

    Google Scholar 

  • Jarre F, Stoer J (2013) Optimierung. Springer-Verlag, Berlin

    Google Scholar 

  • Koch T, Hiller B, Pfetsch ME, Schewe L (2015) Evaluating gas network capacities. SIAM, Philadelphia

    Book  Google Scholar 

  • Lappe W, Niemeier R (2002) Rollfügen—Der “coole” Weg zum Profil. Stahlbau 71(11):781–788

    Article  Google Scholar 

  • Lange K (1988) Umformtechnik: Handbuch für die Industrie und Wissenschaft. Band 2: Massivumformung. Springer, Berlin

    Google Scholar 

  • Lange K (ed) (1990) Umformtechnik: Handbuch für die Industrie und Wissenschaft. Band 3: Blechbearbeitung. Springer, Berlin

    Google Scholar 

  • Lawler EL, Wood DE (1966) Branch-and-bound methods: a survey. Oper Res 14(4):699–719

    Article  Google Scholar 

  • Lindemann U (2009) Methodische Entwicklung technischer Produkte: Methoden flexibel und situationsgerecht anwenden, 3. korr. Auflage. Springer, Berlin

    Google Scholar 

  • Marsden AL, Wang M, Dennis JE Jr, Moin P (2004) Suppression of vortex-shedding noise via derivative-free shape optimization. Phys Fluids 16(10):L83–L86

    Article  Google Scholar 

  • Naceur H, Guo YQ, Batoz JL, Knopf-Lenoir C (2001) Optimization of drawbead restraining forces and drawbead design in sheet metal forming process. Int J Mech Sci 43(10):2407–2434

    Article  Google Scholar 

  • Nocedal J, Wright S (2006) Numerical optimization. Springer Science & Business Media, New York

    Google Scholar 

  • Pahl G, Beitz W, Feldhusen J, Grote KH (2006) Pahl/Beitz Konstruktionslehre: Grundlagen erfolgreicher Produktentwicklung—Methoden und Anwendung. Springer, Berlin

    Google Scholar 

  • Pahl G, Beitz W, Feldhusen J, Grote KH (2007) Engineering design: a systematic approach, 3rd edn. Springer, London

    Book  Google Scholar 

  • Pelz PF, Groche P (eds) (2015) Uncertainty in mechanical engineering II. Trans Tech Publications, Darmstadt

    Google Scholar 

  • Roy R, Hinduja S, Teti R (2008) Recent advances in engineering design optimisation: challenges and future trends. CIRP Ann Manuf Technol 57(2):697–715

    Article  Google Scholar 

  • Schmitt SO, Avemann J, Groche P (2012) Development of manufacturing process chains considering uncertainty. In: Proceedings of the 4th International Conference on Changeable, Agile, Reconfigurable and Virtual production, Montreal, Canada, 2–5 Oct 2011, Springer, Berlin, , pp 111–116

    Google Scholar 

  • Son YK, Park CS (1987) Economic measure of productivity, quality and flexibility in advanced manufacturing systems. J Manuf Syst 6(3):193–207

    Article  Google Scholar 

  • Suh NP (1998) Axiomatic design theory for systems. Res Eng Des 10(4):189–209

    Article  Google Scholar 

  • Tekkaya AE, Allwood JM, Bariani PF, Bruschi S, Cao J, Gramlich S, Groche P, Hirt G, Ishikawa T, Löbbe C, Lueg-Althoff J, Merklein M, Misiolek WZ, Pietrzyk M, Shivpuri R, Yanagimoto J (2015) Metal forming beyond shaping: predicting and setting product properties. CIRP Ann 64(2):629–653

    Article  Google Scholar 

  • Tschaetsch H (2006) Metal forming practise: processes—machines—tools. Springer, Berlin, Heidelberg

    Google Scholar 

  • Verein Deutscher Ingenieure (1993) Methodik zum Entwickeln und Konstruieren technischer Systeme und Produkte, Richtlinie VDI 2221. VDI, Düsseldorf

    Google Scholar 

  • Verein Deutscher Ingenieure (2004) Entwicklungsmethodik für mechatronische Systeme, Richtlinie VDI 2206. VDI, Düsseldorf

    Google Scholar 

  • Weber C (2005) CPM/PDD: an extended theoretical approach to modelling products and product development processes. In: Bley H, Jansen H, Krause FL, Shpitalni M (eds) Proceedings of the 2nd German-Israeli symposium for design and manufacturing. Fraunhofer IRB Verlag, Stuttgart, pp 159–179

    Google Scholar 

  • Wiebenga JH, van den Boogaard AH, Klaseboer G (2012) Sequential robust optimization of a V-bending process using numerical simulations. Struct Multidiscip Optim 46(1):137–153

    Article  Google Scholar 

  • Westkämper E (ed) (1997) Null-Fehler-Produktion in Prozeßketten: Maßnahmen zur Fehlervermeidung und -kompensation. Qualitätsmanagement. Springer, Berlin

    Google Scholar 

  • Westkämper E, Warnecke H-J (eds) (2010) Einführung in die Fertigungstechnik. Vieweg+Teubner Verlag, Wiesbaden

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Institute for Production Engineering and Forming Machines (PtU), Technische Universität Darmstadt, Darmstadt, Germany

    V. Monnerjahn, P. Groche & S. Köhler

  2. Physical Metallurgy (PhM), Technische Universität Darmstadt, Darmstadt, Germany

    E. Bruder

  3. Institute for Product Development and Machine Elements (pmd), Technische Universität Darmstadt, Darmstadt, Germany

    S. Gramlich, I. Mattmann, M. Roos & C. Wagner

Authors
  1. V. Monnerjahn
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. E. Bruder
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. S. Gramlich
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. P. Groche
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. S. Köhler
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. I. Mattmann
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. M. Roos
    View author publications

    You can also search for this author in PubMed Google Scholar

  8. C. Wagner
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to V. Monnerjahn .

Editor information

Editors and Affiliations

  1. Institute for Production Engineering and Forming Machines (PtU), Technische Universität Darmstadt, Darmstadt, Germany

    Peter Groche

  2. Materials Science Department, Physical Metallurgy Division , Technische Universität Darmstadt, Darmstadt, Germany

    Enrico Bruder

  3. Institute for Product Development and Machine Elements (pmd), Technische Universität Darmstadt, Darmstadt, Germany

    Sebastian Gramlich

Rights and permissions

Reprints and permissions

Copyright information

© 2017 Springer International Publishing AG

About this chapter

Cite this chapter

Monnerjahn, V. et al. (2017). The CRC666 Approach: Realizing Optimized Solutions Based on Production Technological Innovation. In: Groche, P., Bruder, E., Gramlich, S. (eds) Manufacturing Integrated Design. Springer, Cham. https://doi.org/10.1007/978-3-319-52377-4_2

Download citation

Publish with us

Policies and ethics

Search

Navigation