Abstract
In the iron making process of blast furnace , the size and location of raceway have an important impact on the distribution of gas flow and gas/solid temperature. Based on a one-dimensional cold-state model, the similar geometry model, subarea method and basic force model were employed in this article to derive and accurately calculate the forces of gravity, gas pressure and friction. Combining a three-dimensional cold-state experiment of raceway detection with optical method, a new expression of raceway size with the blast velocity was obtained as well as the modification factor of gas pressure.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
J.B. Wagstaff, W.H. Holman, Comparison of blast furnace penetration with model studies. Trans. AIME 209, 370–376 (1957)
J. Szekely, J.J. Poveromo, A mathematical and physical representation of the raceway region in the iron blast furnace. Metall. Trans. 6(B), 119–130 (1975)
P.J. Flint, J.M. Burgess, A fundamental study of raceway size in two dimensions. Metall. Trans. 23(B), 267–283 (1992)
M. Hatano et al., Analysis of the combustion zone in the experimental blast furnace. Trans. Iron Steel Inst. 17, 102–109 (1977)
M. Nakamura et al., Configuration of the raceway in the experimental furnace. Tetsu-to-Hagane 63, 28–36 (1977)
F.J. Doyle III, R. Jackson, J.C. Ginestra, The phenomenon of pinning in an annular moving bed reactor with crossflow of gas. Chem. Eng. Sci. 41(6), 1485–1495 (1986)
V.B. Apte, T.F. Wall, J.S. Truelove, Stress distribution in a packed bed above raceway cavities formed by an air jet. AIChE J. 36(3), 461–468 (1990)
S. Rajneesh, G.S. Gupta, Importance of frictional forces on the formation of cavity in a packed bed under cross flow of gas. Powder Technol. 134, 72–85 (2003)
G.S. Gupta et al., Mechanics of raceway hysteresis in a packed bed. Metall. Mater. Trans. B 36(6), 755–764 (2005)
Acknowledgements
The work in this article is financially supported by the National Key Research and Development Program of China (2016YFGX05005801) and the National Natural Science Foundation of China (51134008).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 The Minerals, Metals & Materials Society
About this chapter
Cite this chapter
Wang, Q., Lu, Y., Jiang, Z. (2017). Mechanical Analysis of Raceway Formation in Bulk Bed of Blast Furnace. In: Liu, X., et al. Energy Materials 2017. The Minerals, Metals & Materials Series. Springer, Cham. https://doi.org/10.1007/978-3-319-52333-0_12
Download citation
DOI: https://doi.org/10.1007/978-3-319-52333-0_12
Publisher Name: Springer, Cham
Online ISBN: 978-3-319-52333-0
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)