Abstract
A novel flash ironmaking process is under development at the University of Utah. A computational fluid dynamics (CFD) approach, coupled with experimental results, was developed for the analysis of the kinetics of reduction of hematite concentrate by H2 + CO mixtures at 1150–1350 °C in a drop tube reactor. Rate expressions of hematite concentrate reduction by single gases (H2 or CO) were used in the analysis of the experimental data under H2 + CO mixtures. Synergistic effects, which were found in the H2 + CO mixture experiments compared with simple summation of contributions of component gases, was considered in this paper. The gas phase was treated as a continuum in the Eulerian frame of reference, and the particles are tracked using a Lagrangian approach in the evaluation of the particle residence time and temperature profile inside the reactor. The calculated reduction degrees based on this approach are in good agreement with the experimental values.
References
H.Y. Sohn, Suspension ironmaking technology with greatly reduced energy requirement and CO2 emissions. Steel Times Int. 31, 68–72 (2007)
H.Y. Sohn et al., Suspension reduction technology for ironmaking with low CO2 emission and energy requirement. Iron Steel Technol. (AIST Trans.) 6, 158–165 (2009)
M.E. Choi, H.Y. Sohn, Development of green suspension ironmaking technology based on hydrogen reduction of iron oxide concentrate: rate measurements. Ironmaking Steelmaking 37, 81–88 (2010)
H.K. Pinegar, M.S. Moats, H.Y. Sohn, Flowsheet development, process simulation and economic feasibility analysis for novel suspension ironmaking technology based on natural gas: part 1—flowsheet and simulation for ironmaking with reformerless natural gas. Ironmaking Steelmaking 39, 398–408 (2012)
F. Chen et al., Kinetics of the reduction of hematite concentrate particles by carbon monoxide relevant to a novel flash ironmaking process. Metall. Mater. Trans. B 46, 1133–1145 (2015)
D. Fan, Y. Mohassab, M. Elzohiery, H.Y. Sohn, Analysis of the hydrogen reduction rate of magnetite concentrate particles in a drop tube reactor through CFD modeling. Metall. Mater. Trans. B 47, 1669–1680 (2016)
F. Chen, Y. Mohassab, S. Zhang, H.Y. Sohn, Kinetics of the reduction of hematite concentrate particles by carbon monoxide relevant to a novel flash ironmaking process. Metall. Mater. Trans. B 46, 1716–1728 (2015)
T.-H. Shih et al., A new k-ϵ eddy viscosity model for high reynolds number turbulent flows. Comput. Fluids 24, 227–238 (1995)
E.H. Chui, G.D. Raithby, Computation of radiant heat transfer on a nonorthogonal mesh using the finite volume method. Numer. Heat Trans. B-Fund. 23, 269–288 (1993)
A.Y. Varaksin, Turbulent Particle-Laden Gas Flows (Springer, New York, 2007), pp. 22–23
Acknowledgements
The authors acknowledge the financial support from American Iron and Steel Institute (AISI) through a Research Service Agreement with the University of Utah under AISI’s CO2 Breakthrough Program. This material also contains results of work supported by the U.S. Department of Energy under Award Number DE-EE0005751.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 The Minerals, Metals & Materials Society
About this paper
Cite this paper
Fan, DQ., Elzohiery, M., Mohassab, Y., Sohn, H.Y. (2017). A CFD Based Algorithm for Kinetics Analysis of the Reduction of Hematite Concentrate by H2 + CO Mixtures in a Drop Tube Reactor. In: Hwang, JY., et al. 8th International Symposium on High-Temperature Metallurgical Processing. The Minerals, Metals & Materials Series. Springer, Cham. https://doi.org/10.1007/978-3-319-51340-9_7
Download citation
DOI: https://doi.org/10.1007/978-3-319-51340-9_7
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-51339-3
Online ISBN: 978-3-319-51340-9
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)