Abstract
The small punch creep test was used to evaluate the creep behavior of a 316 type austenitic stainless steel at temperatures of 650, 675 and 700 °C and loads from 199 to 512 N using a creep tester with a specimen size of 10 x 10 x 0.3 mm under an argon atmosphere. The small punch creep curves shows the three stages found in the creep curves of the conventional uniaxial test. The time to rupture decreases as the testing temperature and load increase. The secondary stage is also reduced with the increase in test load. An intergranular ductile fracture mode was observed at a testing temperature of 700 °C, while intergranular brittle mode at 650 °C which is associated with the absence of abundant precipitation at 650 °C.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
P. Marshal, Austenitic stainless Steels Microstructure and Properties (Elsevier, London, 1984) p. 125.
M.L. Saucedo-Muñoz, S. Komazaki, T. Hashida, T. Shoji and V.M. Lopez-Hirata, Revista de Metalurgia de Madrid 39 (2003) 378.
M.L. Saucedo-Muñoz, S. Komazaki, T. Takahashi and T. Shoji, J. Mater. Res. 17 (2002) 1945.
S. Komazaki, S., Hashida, T., Shoji, T., Suzuki, K., 2000. Development of small punch tests for creep property measurement of tungsten-alloyed 9%Cr ferritic steels Journal of Testing and Evaluation 28, 249–256.
K. Komazaki, T. Kato, Y. Kohno and H. Tanigawa, Mater Sci. Eng. 511A (2009) 229.
Dieter, G.E., 1988. Mechanical Metalurgy, Mc Graw-hill, New York.
NRIM, Metallographic Atlas of Long-term Crept Materials No. M-2 (National Research Institute for Metals, Tokyo, Japan, 2003)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 TMS (The Minerals, Metals & Materials Society)
About this chapter
Cite this chapter
Saucedo-Muñoz, M.L., Komazaki, KI., Ortiz-Mariscal, A., Lopez-Hirata, V.M. (2016). Small Punch Creep Test in a 316 Austenitic Stainless Steel. In: Ikhmayies, S.J., et al. Characterization of Minerals, Metals, and Materials 2016. Springer, Cham. https://doi.org/10.1007/978-3-319-48210-1_63
Download citation
DOI: https://doi.org/10.1007/978-3-319-48210-1_63
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-48623-9
Online ISBN: 978-3-319-48210-1
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)