Abstract
The application of Mg-Li alloys is restricted in practice due to mainly poor corrosion resistance and wear resistance. Electroless nickel plating is one of the common and effective ways to protect alloys from corrosion. In this study, nano-SiO2 particles with Ni-P matrix have been successfully co-deposited onto dual phase Mg-8Li base alloy through electroless plating, generating homogeneously Ni-P/nano-SiO2 composite coating. The morphology, elemental composition and structures of coatings were investigated. Coating performances were evaluated using hardness tests and electrochemical analysis. The results indicate that the Ni-P/nano-SiO2 composite coating can significantly improve the wear and corrosion resistance.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
A. Sharma, R. Uma Rani, and S. Mayanna, “Thermal studies on electrodeposited black oxide coating on magnesium alloys,” Thermochimica acta, 376 (2001), 67–75.
J. M. Song, T. X. Wen, and J. Y. Wang, “Vibration fracture properties of a lightweight Mg-Li-Zn alloy,” Scripta materialia, 56 (2007), 529–532.
A. Sanschagrin et al, “Mechanical properties and micro structure of new magnesium-lithium base alloys,” Materials Science and Engineering: A, 220 (1996), 69–77.
Z. Trojanová et al., “Deformation behaviour of Mg-Li alloys at elevated temperatures,” Materials Science and Engineering: A, 410 (2005), 148–151.
S. Wang, et al., “Microstructures and mechanical properties of 5 wt.% Al2 Y p/Mg-Li composite,” Materials Letters, 60 (2006), 1863–1865.
M. C. Zhao et al., “An exploratory study of the corrosion of Mg alloys during interrupted salt spray testing,” Corrosion Science, 51 (2009), 1277–1292.
L. Liu, M. Schlesinger, “Corrosion of magnesium and its alloys,” Corrosion Science, 51 (2009), 1733–1737.
J. Gray, B. Luan, “Protective coatings on magnesium and its alloys-a critical review,” Journal of alloys and compounds, 336 (2002), 88–113.
R. Ambat, W. Zhou, “Electroless nickel-plating on AZ91D magnesium alloy: effect of substrate micro structure and plating parameters,” Surface and Coatings Technology, 179 (2004), 124–134.
A. Grosjean, M. Rezrazi, and J. Takadoum, “Hardness, friction and wear characteristics of nickel-SiC electroless composite deposits,” Surf Coat Technol, 137 (2001), 92–96.
J. N. Balaraju, T. S. N. Sankara-Narayanan, and S. K. Seshadri, “Electroless Ni-P composite coatings,” Appl Electrochem, 33 (2003), 807–816.
R. Wang et al., “Preparation and characterization of nanodiamond cores coated with a thin Ni-Zn-P alloy film,” Mater Character 59 (2008), 108–111.
T. Rabizadeh, and S. R. Allahkaram, “Corrosion resistance enhancement of Ni-P electroless coatings by incorporation of nano-SiO2 particles,” Materials and Design, 32 (2011), 133–138.
D. Dong et al., “Preparation and properties of electroless Ni-P-SiO2 composite coatings” Applied Surface Science, 255 (2009), 7051–7055.
S. Alirezaei et al., “Wear behavior of Ni-P and Ni-P-Al2O3 electroless coatings,” Wear, 262 (2007), 978–985.
K. Keong, W. Sha, “Crystallisation and phase transformation behaviour of electroless nickel-phosphorus deposits and their engineering properties,” Surface Engineering, 18 (2002), 329–343.
Y. Song et al., “Corrosion characterization of Mg-8Li alloy in NaCl solution,” Corrosion Science, 51 (2009), 1087–1094.
H.P. Liu et al, “Effect of organic additives on the corrosion resistance properties of electroless nickel deposits,” Thin solid films, 516(2008), 1883–1889.
H. Yang et al., “A homogenisation pre-treatment for adherent and corrosion-resistant Ni electroplated coatings on Mg-alloy AZ91D,” Corrosion Science, 79 (2014), 41–49.
J. Lian et al., “Electroless Ni-P deposition plus zinc phosphate coating on AZ91D magnesium alloy,” Surface and Coatings Technology, 200 (2006), 5956–5962.
H. Ashassi-Sorkhabi, B. Shaabani, and D. Seifzadeh, “Corrosion inhibition of mild steel by some Schiff base compounds in hydrochloric acid,” Applied Surface Science, 239 (2005), 154–164.
J. Balaraju, T. S. Narayanan, and S. Seshadri, “Evaluation of the corrosion resistance of electroless Ni-P and Ni-P composite coatings by electrochemical impedance spectroscopy,” Journal of solid state electrochemistry, 5 (2001), 334–338.
R. Abdel Hameed, and A. Fekry, “Electrochemical impedance studies of modified Ni-P and Ni-Cu-P deposits in alkaline medium,” Electrochimica Acta, 55 (2010), 5922–5929.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 TMS (The Minerals, Metals & Materials Society)
About this chapter
Cite this chapter
Zou, Y., Zhang, Z.W., Zhang, M.L. (2015). Electroless Ni-P/Nano-SiO2 Composite Plating on Dual Phase Magnesium-Lithium Alloy. In: Manuel, M.V., Singh, A., Alderman, M., Neelameggham, N.R. (eds) Magnesium Technology 2015. Springer, Cham. https://doi.org/10.1007/978-3-319-48185-2_64
Download citation
DOI: https://doi.org/10.1007/978-3-319-48185-2_64
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-48611-6
Online ISBN: 978-3-319-48185-2
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)