Abstract
The surface quality of ø1000mm ingot of steel 45# produced by electroslag continuous casting with liquid metal (ESCCLM) were investigated in this work. The results showed that the important effect factors for getting the better surface quality of ingot were appropriate casting temperature of molten steel (1606°C), higher voltage (80V) and steady current (18kA), the special premelted slag, uniformily and appropriate secondary cooling control and steady withdrawing speed (8∼10mm/min).
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Holzgruber H, Holzgruber W, “Medovar Memorial Symposium” (Kiev: E O Paton Electric Welding Institute, 2001), 41–48.
Holzgruber W, Holzgruber H, “Production of High Quality Billets with the New Electroslag Rapid Remelting Process,” MPT International, 19(5)1996, 48–50.
Medovar L B et al., “New Electroslag Technologies, Medovar Memorial Symposium” (Kiev: E O Paton Electric Welding Institute, 2001), 49–60.
Weiguo Xu et al., “Application of Centrifugal Electroslag Induction Casting Technology,” Special Steel, 16(5)1995, 42–44.
Xchun Chen et al., “Recent Development of Electroslag Metallurgy,” Journal of Iron and Steel Research, 15(2)2003, 63–67.
Zhouhua Jiang, The Physical Chemistry and Metallurgical Appearance of Electroslag Metallurgy (Shenyang: NEU press, 2000), 67.
Ximin Zang et al., “Effect Factors on Surface Quality of Electroslag Concasting Billet,” Special Steel, 27(5)2006, 49–50.
Zhengbang Li, Theory and Practice of electroslag metallurgy (Beijing: Metallurgical Industry Press, 2010), 367.
Wei Xing et al., “Study on Secondary Cooling and Quality of Continuous Cast Billet,” Foundry Technology, 33(1)2012, 66–68.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 TMS (The Minerals, Metals & Materials Society)
About this paper
Cite this paper
Deng, X., Jiang, Z., Zang, X. (2013). Factors Affecting Surface Quality of Ingot Produced by Electroslag Continuous Casting with Liquid Metal. In: Krane, M.J.M., Jardy, A., Williamson, R.L., Beaman, J.J. (eds) Proceedings of the 2013 International Symposium on Liquid Metal Processing & Casting. Springer, Cham. https://doi.org/10.1007/978-3-319-48102-9_18
Download citation
DOI: https://doi.org/10.1007/978-3-319-48102-9_18
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-48587-4
Online ISBN: 978-3-319-48102-9
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)