Abstract
Usually the safety margin against failure for precracked components is calculated with fracture mechanics approaches. Due to several severe limitations of these approaches, it was searched for alternative calculation models. Starting with McClintock and Berg in the sixties, so-called damage models have been developed for describing ductile fracture on the basis of micromechanical processes. The development of such kind of models is in progress now for nearly 50 years, but until today no model is generally accepted and incorporated into the international standards. In an extended introduction, the micromechanical phases of ductile rupture of metal and alloys are presented. Against this background, a summary of the evolution and the different kinds of micromechanical-based model approaches is given. The theoretical background, the advantages/ disadvantages and the limitations of the models are discussed critically. Finally non-local formulations of damage models are presented. Combinations of ductile damage models and models for cleavage to describe fracture in the brittle-ductile transition region are discussed.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Notes
- 1.
Manganese sulfides at which voids initiate at low plastic deformations can have a size larger than several μm.
References
Abendroth, M. (2004) Identifikation elastoplastischer und schädigungsmechanischer Materialparameter aus dem Small Punch Test. Dissertation, Technische Universität Bergakademie Freiberg
Aboutayeb, S. M. (2000) Comportement a l’endommagement des materiaux metalliques heterogenes: Simulation et experience. These de doctorat, Universite des Sciences et Technologies de Lille
Acharyya S, Dhar S (2008) A complete GTN model for prediction of ductile failure of pipe. J Mater Sci 43(6):1897–1909
Anderson TL, Stienstra D, Dodds R (1994) A theoretical framework for addressing fracture in the ductile-brittle transition region. ASTM STP 1207:186
ARAMIS 2M (2007) Benutzerinformation - Hardware, Gesellschaft für optische Messtechnik. Braunschweig
Argon A (1975) Cavity formation from inclusions in ductile fracture. Metall Trans A 6A:825–837
Argon A (1975) Seperation of second phase particles in spheroidized 1045 steel, Cu-0.6Pct Cr alloy, and maragin steel in plastic straining. Metall Trans A 6A:839–851
Argon A (1976) Formation of cavities from nondeformable second-phase particles in low temperature ductile fracture. J Eng Mater Technol 60–68 (pub. by the American Society of Mechanical Engineers)
Arndt J, Majedi H, Dahl W (1996) Influence of strain history on ductile failure of steel. Le Journal de Physique IV 06, C6:23–32
Arndt J (1997) Experimentelle und rechnerische Untersuchungen zur Schädigung von Baustählen bei duktilem Versagen. Dissertation, IEHK, RWTH Aachen
Ashby M, Gandhi C, Taplin D (1979) Fracture-mechanism maps and their construction for f.c.c. metals and alloys. Acta Metall 27:699–729
Aurich D, Gerwien P, Häcker R, Hünecke J, Klingbeil D, Krafka H, Künecke G, Ohm K, Veith H, Wossidlo P (1997) Experimentelle und numerische Untersuchungen des statischen und dynamischen Rißwiderstandsverhaltens verschiedener höherfester Baustähle im Temperaturbereich von 20 °C bis 350 °C. 23. MPA-Seminar: Sicherheit und Verfügbarkeit in der Anlagentechnik 1, Universität Stuttgart 14.1–14.24
Baaser H, Gross D (2003) Analysis of void growth in a ductile material in front of a crack tip. Comput Mater Sci 26:28–35
Babout L (2004) Damage initiation in model metallic materials: X-ray tomography and modeling. Acta Mater 52(8):2475–2487
Bai Y, Wierzbicki T (2008) A new model of metal plasticity and fracture with pressure and Lode dependence. Int J Plast 24(6):1071–1096
Bandstra J, Goto D, Koss D (1998) Ductile failure as a result of a void-sheet instability: experiment and computational modeling. Mater Sci Eng, A 249:46–54
Barnby JT (1967) The initiation of ductile failure by fractured carbides in an austenitic stainless steel. Acta Metall 15:903–909
Batisse R (1987) Ductile fracture of a 508 Cl 3 steel in relation with inclusion content: the benefit of the local approach of fracture and continuum damage mechanics. Nucl Eng Des 105:113–120
Batisse R (1988) Contribution à la modelisation de la rupture ductile des aciers. Dissertation, Université de Technologie de Compiegne
Bauvineau L, Burlet H, Eripret C, Pineau A (1996) Modelling ductile stable crack growth in a C-Mn steel with local approaches. Le J de Physique IV 06(C6):33–42
Bažant Z, Jirásek M (2002) Nonlocal integral formulations of plasticity and damage: survey of progress. J Eng Mech 128(11):1119–1149
Bažant ZP (1984) Imbricate continuum and its variational derivation. J Eng Mech 110(12):1693–1712
Bažant Z, Pijaudier-Cabot G (1988) Nonlocal continuum damage, localization instability and convergence. J Appl Mech 55:287–293
Beachem CD (1973) The effects of crack tip plastic flow directions upon microscopic dimple shapes. Metall Trans A 6A:377–383
Becker R, Needleman A, Richmond O, Tvergaard V (1988) Void growth and failure in notched bars. J Mech Phys Solids 36(3):317–351
Benzerga A (2002) Micromechanics of coalescence in ductile fracture. J Mech Phys Solids 50:1331–1362
Benzerga A, Besson J, Pineau A (2004) Anisotropic ductile fracture—part I: experiments. Acta Mater 52(15):4623–4638
Benzerga A, Besson J, Pineau A (2005) How much input is needed from the microstructure to model ductile fracture? Int Conf Fract 11
Benzerga AA, Leblond J-B (2010) Ductile fracture by void growth to coalescence. Adv Appl Mech 44:169
Benzerga A, Besson J, Pineau A (1999) Coalescence-controlled anisotropic ductile fracture. J Eng Mater Technol 121(2):221–229
Bernauer G, Brocks W (2002) Micro-mechanical modelling of ductile damage and tearing—results of a European numerical round robin. Fatigue Fract Eng Mater Struct 25:363–384
Berdin C, Besson J, Bugat S (2004) Local approach to fracture. Paris: les Presses de l’Ecole des mines – ISBN 2-911762-55-X
Berg CA (1969) Plastic dilation and void interaction, inelastic behavior of solids. McGraw-Hill Book Company, New York
Beremin F (1981) Cavity formation from inclusions in ductile fracture of A508 steel. Metall Trans A 12A:723–731
Beremin F (1981) Study of fracture criteria for ductile rupture of A508 steels. In: 5th international conference on fracture, Cannes, pp 809–816
Beremin FM (1981) Experimental and numerical study of the different stages in ducitle rupture: application to crack initiation and stable crack growth, three-dimensional constitutive relations and ductile fracture. North Holland Publishing Company, pp 185–205
Beremin FM (1983) A local criterion for cleavage fracture of a nuclear pressure vessel steel. Metall Trans A 14A:2277–2287
Bernauer G (1997) Einsatz mikromechanischer schädigungsmodelle im sprödduktilen Übergangsbereich. Dissertation, Universität Karlsruhe
Bernauer G, Brocks W, Muehlich U, Steglich D, Werwer M (1999) Hinweise zur Anwendung des Gurson-Tvergaard-Needleman-Modells. Technical note gkss/wmg/99/10, GKSS-Forschungszentrum Geesthacht
Bernauer G, Brocks W, Schmitt W (1999) Modifications of the Beremin model for cleavage fracture in the transition region of a ferritic steel. Eng Fract Mech 64:305–325
Besson J, Steglich D, Brocks W (2001) Modeling of crack growth in round bars and plane strain specimens. Int J Solids Struct 38:8259–8284
Besson J, Guillemer-Neel C (2003) An extension of the green and gurson models to kinematic hardening. Mech Mater 35:1–18
Besson J, Steglich D, Brocks W (2003) Modeling of plane strain ductile rupture. Int J Plast 19:1517–1541
Besson J, Shinohara Y, Morgeneyer T, Madi Y (2008) Effect of prestrain on ductility of a X100 pipeline steel. In: Proceedings of the 17th european conference on fracture, pp 757–764
Besson J (2009) Damage of ductile materials deforming under multiple plastic or viscoplastic mechanisms. Int J Plast 25(11):2204–2221
Besson J (2010) Continuum models of ductile fracture: a review. Int J Damage Mech 19(1):3–52
Bishop J, Hill R (1951) A Theory of the plastic distortion of a polycrystalline aggregate under combined stresses. Philos Mag Ser 7:414–427
Bonora N, Gentile D, Pirondi A (2004) Identification of the parameters of a non-linear continuum damage mechanics model for ductile failure in metals. J Strain Anal 39(6):639–651
Bonora N, Gentile D, Pirondi A, Newaz G (2005) Ductile damage evolution under triaxial state of stress: theory and experiments. Int J Plast 21(5):981–1007
Bonora N (1997) A nonlinear CDM model for ductile failure. Eng Fract Mech 58(1/2):11–28
Bonora N (1999) Identification and measurement of ductile damage parameters. J Strain Anal Eng Des 34(6):463–478
Bordet S, Karstensen A, Knowles D, Wiesner C (2005) A new statistical local criterion for cleavage fracture in steel. Part I: model presentation. Eng Fract Mech 72:435–452
de Borst R (1991) Simulation of strain localization: a reappraisal of the cosserat continuum. Eng Comp 8:317–332
de Borst R, Mühlhaus HB (1992) Gradient-dependent plasticity: formulation and algorithmic aspects. Int J Numer Meth Eng 35:521–539
de Borst R, Sluys L, Mühlhaus HB, Pamin J (1993) Fundamental issues in finite element analyses of localization of deformation. Eng Comput 10(2):99–121
Brocks W, Cornec A, Scheider I (2003) Computational aspects of nonlinear fracture mechanics. Compr Struct Integrity 3:127–209
Bron F (2004) Ductile rupture in thin sheets of two grades of 2024 aluminum alloy. Mater Sci Eng, A 380(1-2):356–364
Bron F, Besson J (2006) Simulation of the ductile tearing for two grades of 2024 aluminum alloy thin sheets. Eng Fract Mech 73(11):1531–1552
Brooksbank D, Andrews KW (1968) Thermal expansion of some inclusions found in steels and relation to tessellated stresses. J Iron Steel Inst 206:595–599
Broek D (1972) The role of inclusions in ductile fracture and fracture toughness, symposium on fracture and fatigue on the school of engineering and applied science. George Washington University, Washington, pp 55–65
Brown LM, Embury JD (1973) The initiation and growth of voids at second phase particles. In: Proceedings of the third international conference on the strength of metals and alloys 1
Brocks W, Klingbeil D, Künecke G, Sun D-Z (1995) Application of the gurson model to ductile tearing resistance. Constraint Eff Fract Theory Appl 2:232–252
Brunet JC, Bellot J (1973) Deformation of MnS inclusions in steel. J Iron Steel Inst 211:511–512
Budiansky B, Hutchinson J, Slutsky S (1982) Void growth and collapse in viscous solids. Mechanics of solids—the rodney hill 60th anniversary volume
Burghard H (1974) The influence of precipitate morphology on microvoid growth and coalescence in tensile fractures. Metall Trans 5:2083–2094
Butcher C, Chen Z, Worswick M (2006) A lower bound damage-based finite element simulation of stretch flange forming of Al–Mg alloys. Int J Fract 142(3-4):289–298
Büttner M, Seidenfuß M, Krätschmer D, Roos E (2011) Experimentelle und schädigungsmechanische Analyse der Rissentwicklung in Mischnähten. 37. MPA-Seminar, Universität Stuttgart, pp 39.1–39.21
Calhoun C (1970) The effects of particles on fracture processes in Magnesium alloys. Metall Trans 1:997–1006
Chaboche JL, Boudifa M, Saanouni K (2006) A CDM approach of ductile damage with plastic compressibility. Int J Fract 137(1-4):51–75
Chao H (1964) Deformation and fracture of MnS crystals. Trans ASME 386–398
Chaouadi R, de Meester P, Scibetta M (1996) Micromechanical modeling of ductile fracture initiation to predict fracture toughness of reactor pressure vessel steels. Le J de Physique IV 06(C6):53–64
Chu C (1980) Void nucleation effects in biaxially stretched sheets. J Eng Mater Technol 102:249–256
Cockcroft M, Latham D (1968) Ductility and the workability of metals. J Inst Met 96:33–39
Cottrell, A. (1959) Theoretical aspects of fracture. Department of Metallurgy, University of Cambridge: 20–53
Cox TB (1974) An investigation of the plastic fracture of AISI 4340 and 18 nickel–200 grade maraging steels. Metall Trans 5:1457–1470
Curran D (1987) Dynamic failure of solids. Physic Rep 147(5 & 6):253–388
Decamp K, Bauvineau L, Besson J, Pineau A (1997) Size and geometry effects on ductile rupture of notched bars in a C-Mn steel: experiments and modeling. Int J Fract 88:1–18
Deimel P, Sattler E (1998) Non-metallic inclusions and their relation to the J-Integral, Ji, phys, at physical crack initiation for different steels and weld metals. J Mater Sci 33:1723–1736
Eckstein J, Roos E, Roll K, Ruther M, Seidenfuß M (2007) Experimental and numerical investigations to extend the process limits in self-pierce riveting. In: 10th ESAFORM conference on material forming, pp 279–286
Eckstein J (2009) Numerische und experimentelle Erweiterung der Verfahrensgrenzen beim Halbhohlstanznieten hochfester Bleche. Dissertation, Institut für Materialprüfung, Werkstoffkunde und Festigkeitslehre, Universität Stuttgart
Eisele U, Seidenfuss M, Pitard-Bouet JM (1996) Comparison between fracture mechanics and local approach models for the analysis of shallow cracks. J de Physique IV:C6-75–C6-89
Enakoutsa K, Leblond J, Perrin G (2007) Numerical implementation and assessment of a phenomenological nonlocal model of ductile rupture. Comput Methods Appl Mech Eng 196(13–16):1946–1957
Engel L (1982) Rasterelektronenmikroskopische Untersuchungen von Metallschäden. 2. neubearbeitete Auflage, Carl Hanser Verlag München. ISBN 3-446-13416-6
Engelen RAB, Geers MGD, Baaijens FPT (2003) Nonlocal implicit gradientenhanced elasto-plasticity for the modelling of softening behaviour. Int J Plast 19(4):403–433
Engelen R, Fleck N, Peerlings R, Geers M (2006) An evaluation of higher-order plasticity theories for predicting size effects and localisation. Int J Solids Struct 43(7–8):1857–1877
Eripret C, Rousselier G (1994) First spinning cylinder test analysis using a local approach to fracture. Nucl Eng Des 152:11–18
Ervasti E, Stahlberg U (2005) Void initiation close to a macro-inclusion during single pass reductions in the hot rolling of steel slabs: a numerical study. J Mater Process Technol 170(1-2):142–150
Eshelby JD (1957) The determination of the elastic field of an ellipsoidal inclusion, and related problems. Math Phys Sci 241(1226):376–396
Faleskog J, Gao X, Shih C (1998) Cell model for nonlinear fracture analysis—I. Micromech calibration. Int J Fract 89:355–373
Fesich T, Mohan P, Marzougui D, Kan CD (2008) A study of the gurson damage model and numerical simulation of ductile failure in LS-DYNA. 7. LS-DYNA Anwenderforum, Bamberg 2008, Crash III. Versagen, Barrieren
Feucht M, Sun DZ, Erhart T, Frank T (2006) Recent development and applications of the Gurson model. 5. LS-DYNA Anwenderforum, Ulm 2006, Material II—Metalle, pp D-II-21–D-II-32
Feucht M (1998) Ein gradientenabhängiges Gursonmodell zur Beschreibung duktiler Schädigung mit Entfestigung. Dissertation, TU Darmstadt
Fisher JR, Gurland J (1981) Void nucleation in spheroidized carbon steels—part 1: experimental. Metal Sci 15(5):185–192
Fisher JR, Gurland J (1981) Void nucleation in spheroidized carbon steels—part 2: model. Metal Sci 15(5):193–202
Forest S, Sievert R (2006) Nonlinear microstrain theories. Int J Solids Struct 43(24):7224–7245
French I, Weinrich P (1975) The influence of hydrostatic pressure on the tensile deformation and fracture of copper. Metall Trans A 6A:785–790
French I, Weinrich P (1976) The shear mode of ductile fracture in materials with few inclusions. Metall Trans A 7A:1841–1845
Freund L, Lee Y (1990) Observations on high strain rate crack growth based on a strip yield model. Non-linear fracture. Springer, Berlin, pp 261–276
Gao X, Shih C, Tvergaard V, Needleman A (1996) Constraint effects on the ductile-brittle transition in small scale yielding. J Mech Phys Solids 44(8):1255–1282
Gao X, Ruggieri C, Dodds RH Jr (1998) Calibration of weibull stress parameters using fracture toughness data. Int J Fract 92:175–200
Gao X, Dodds R Jr, Tregoning R, Joyce A, Link R (1999) A Weibull stress model to predict cleavage fracture in plates containing surface cracks. Fatigue Fract Eng Mater Struct 22:481–493
Gao X, Dodds RH Jr, Tregoning RL, Joyce JA, Link RE (1999) A weibull stress model to predict cleavage fracture in plates containing surface cracks. Fatigue Fract Eng Mater Struct 22:481–493
Gao X, Zhang G, Srivatsan T (2005) Prediction of cleavage fracture in ferritic steels: a modified Weibull stress model. Mater Sci Eng, A 394:210–219
Gao X, Zhang G, Srivatsan T (2006) A probabilistic model for prediction of cleavage fracture in the ductile-to-brittle transition region and the effect of temperature on model parameters. Mater Sci Eng A 415:264–272
Gao X, Kim J (2006) Modeling of ductile fracture: significance of void coalescence. Int J Solids Struct 43:6277–6293
Gao X, Zhang G, Roe C (2010) A study on the effect of the stress state on ductile fracture. Int J Damage Mech 19(1):75–94
Gao X, Faleskog J, Shih C, Dodds R Jr (1998) Ductile tearing in part-through cracks: experiments and cell-model predictions. Eng Fract Mech 59(6):761–777
Gardner R, Pollock T, Wilsdorf H (1977) Crack initiation at dislocation cell boundaries in the ductile fracture of metals. Mater Sci Eng 169–174
Geers M (1997) Experimental analysis and computational modelling of damage and fracture. PhD thesis, Eindhoven University of Technology
Gologanu M, Leblond J, Devaux J (1994) Approximate models for ductile metals containing nonspherical voids—case of axisymmetric oblate ellipsoidal cavities. J Eng Mater Technol 116:290–297
Goods SH, Brown LM (1979) The nucleation of cavities by plastic deformation. Acta Metall 27:1–15
Gross D, Seelig T (2007) Bruchmechanik: Mit einer Einführung in die Mikromechanik. 4. bearb. Auflage, Berlin [u.a.]: Springer, Berlin. ISBN 3-540-37113-3
Gurland J (1963) The mechanism of dutile rupture of metals containing inclusions. Trans ASME 56:443–454
Gurland J (1972) Oberservation on the fracture of cementile particles in spheroidized 1,05 % C steel deformed at room temperature. Acta Metall 20(5):735–741
Gurson AL (1975) Plastic flow and fracture behaviour of ductile materials: incorporating void nucleation, growth, and interaction. Thesis, Brown University, Rhode Island
Gurson A (1977) Continuum theory of ductile rupture by void nucleation and growth: part I yield criteria and flow rules for porous ductile media. J Eng Mat Technol 99(1):2−15
Hancock JW (1976) On the mechanisms of ductile failure in high-strength steels subjected to multi-axial stress states. J Mech Phys Solids 24:147–169
Helms R (1977) Theoretische und Experimentelle Untersuchungen zum Mechanismus des duktilen Bruches metallischer Werkstoffe. Archiv für das Eisenhüttenwesen 48, Nr. 5:297–302
Henry G, Horstmann D (1979) De ferri metallographia V : Fraktographie und Mikrofraktographie. Düsseldorf, London: Verlag Stahleisen, Heyden. ISBN 3-514-00215-0
Hentrich M, Veit P, Stroppe H (1981) Der duktile Bruch von Materialien mit Einschlüssen. Wissenschaftliche Zeitschrift der Technischen Hochschule Otto von Guerike Magdeburg, Heft 2
Hill R (1965) A self-consistent mechanics of composite materials. J Mech Phys Solids 13:213–222
Hor A, Lebrun J-L, Morel F (2009) Experimental study and local approach modelling of ductile damage in steels over a wide temperature range. In: 7th EUROMECH solid mechanics conference
Hosseini SB, Temmel C, Karlsson B, Ingesten N-G (2007) An in-situ scanning electron microscopy study of the bonding between mns inclusions and the matrix during tensile deformation of hot-rolled steels. Metall Mater Trans A 38A:982–989
Huang Y (1991) Accurate dilatation rates for spherical voids in triaxial fields. J Appl Mech 58:1084–1086
Huber G, Brechet Y, Pardoen T (2005) Predictive model for void nucleation and void growth controlled ductility in quasi-eutectic cast aluminium alloys. Acta Mater 53:2739–2749
Hütter G, Linse T, Mühlich U, Kuna M (2013) Simulation of ductile crack initiation and propagation by means of a non-local gurson-model. Int J Solids Struct 50(5):662–671
Hütter G, Linse T, Roth S, Mühlich U, Kuna M (2013) A modeling approach for the complete ductile-brittle transition region: cohesive zone in combination with a non-local gurson-model. Int J Fract 185(1-2):1–25
Ishikawa N, Parks D, Kurihara M (2000) Micromechanism of ductile crack initiation in structural steels based on void nucleation and growth. ISIJ Int 40(5):519–527
Jackiewicz J, Kuna M (2003) Non-local regularization for fe simulation of damage in ductile materials. Comput Mater Sci 28(3-4):684–695
Jirásek M (1998) Nonlocal models for damage and fracture: comparison of approaches. Int J Solids Struct 35(31-32):4133–4145
Jirásek M, Rolshoven S (2009) Localization properties of strain-softening gradient plasticity models. part I: strain-gradient theories. Int J Solids Struct 46:2225–2238
Johnson, G., W. Cook (1983) A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures. In: Proceedings of 7th international symposium on ballistics, pp 541–547
Johnson G, Cook W (1985) Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures. Eng Fract Mech 21(1):31–48
Kachanov LM (1999) Rupture time under creep conditions (1958). Int J Fract 97:11–18
Kanvinde AM (2006) Void growth model and stress modified critical strain model to predict ductile fracture in structural steels. Struct Eng 1907–1918
Kim J, Gao X, Srivatsan T (2004) Modeling of void growth in ductile solids: effects of stress triaxiality and initial porosity. Eng Fract Mech 71:379–400
Koplik J, Needleman A (1988) Void growth and coalescence in porous plastic solids. Int J Solids Struct 24(8):835–853
Kröner E (1961) Zur plastischen Verformung des Vielkristalls. Acta Metall 9:155–161
Kroon, M., Faleskog J. (2002) A probabilistic model for cleavage fracture with a length scale-influence of material parameters and constraint. Int J Fract 99–118
Kroon M, Faleskog J (2005) Micromechanics of cleavage fracture initiation in ferritic steels by carbide cracking. J Mech Phys Solids 53(1):171–196
Kuna M, Sun D (1996) Three-dimensional cell model analyses of void growth in ductile materials. Int J Fract 81:235–258
Kussmaul K, Eisele U, Seidenfuss M (1993) On the Applicability of local approaches for the determination of the failure behavior of ductile steels. J Pressure Vessel Technol 115:214–220
Kussmaul K, Seidenfuss M (1993) On the transferability of micro-mechanical damage models to specimens of different size and geometry. In: The 6th German-Japanese joint seminar on structural strength and NDE Problems in nuclear engineering
Kussmaul K, Seidenfuss M, Eisele U (1993) On the applicability of damage models for the description of the failure behaviour of ductile steels. In: 8th international confernce on fracture
Kussmaul K, Eisele U, Seidenfuss M (1995) On the applicability of local approach models for the determination of the failure behaviour of steels of different toughness. Fatigue Fract Mech Press Vessel Pip ASME PVP 304:17–25
Kußmaul K, Seidenfuß M, Elsäßer K, Mayer U, Zies G (1995) Reaktorsicherheitsforschung - Vorhaben-Nr. 1500 913: Experimentelle und numerische Untersuchungen zur Beschreibung des Versagensverhaltens von Stählen unterschiedlicher Zähigkeit mit Hilfe von Schädigungsmodellen. MPA Universität Stuttgart
Lange G (1983) Mikroskopische und makroskopische Erscheinungsformen des duktilen Gewaltbruches (Gleitbruch), Systematische Beurteilung techn. Schadensfälle, DGM, pp 79–87
Lautridou J (1981) Crack initiation and stable crack growth resistance in A508 steels in relation to inclusion distribution. Eng Fract Mech 15:55–71
Le Roy G, Embury JD, Edwards G, Ashby M (1981) A model of ductile fracture based on the nucleation and growth of voids. Acta Metall 29:1509–1522
Leblond J-B, Mottet G (2008) A theoretical approach of strain localization within thin planar bands in porous ductile materials. C R Mécanique 336(1−2):176−189
Leblond J, Perrin G, Devaux J (1994) Bifurcation effects in ductile metals with nonlocal damage. J Appl Mech 61:236
Leblond J, Perrin G, Devaux J (1995) An improved Gurson-type model for hardenable ductile metals. Eur J Mech A/Solids 14:499–527
Lemaître J, Desmorat R (2005) Engineering damage mechanics: ductile, creep, fatigue and brittle failures. Springer, Berlin. ISBN 3-540-21503-4
Lemaitre J, Chaboche JL (1978) Aspects phénoménologique de la rupture par endommagement. J de Mécanique appliquée 2(3):317–365
Lemaitre J (1984) How to use damage mechanics. Nucl Eng Des 80:233–245
Lemaitre J (1985) Coupled elasto-plasticity and damage constitutive equations. Comput Methods Appl Mech Eng 51:31–49
Lemaitre J (1985) A continuous damage mechanics model for ductile fracture. J Eng Mater Technol 107:83–89
Lemaitre J (1990) Micro-mechanics of crack initiation. Int J Fract 42:87–99
Lemaitre J (1996) A course on damage mechanics, 2nd revised and enlarged edition. Springer, Berlin. ISBN 3-540-60980-6
Linse T, Hütter G, Kuna M (2012) Simulation of crack propagation using a gradient-enriched ductile damagemodel based on dilatational strain. Eng Fract Mech 95:13–28
Linse T, Kuna M, Viehrig HW (2014) Quantification of brittle-ductile failure behavior of ferritic reactor pressure vessel steels using the small-punch-test and micromechanical damage models. Mater Sci Eng, A 614:136–147
Lode W (1926) Versuche über den Einfluß der mittleren Hauptspannung auf das Fließen der Metalle Eisen. Kupfer und Nickel. Zeitschrift für Physik 36(11–12):913–939
Lorentz E, Besson J, Cano V (2008) Numerical simulation of ductile fracture with the Rousselier constitutive law. Comput Methods Appl Mech Eng 197(21–24):1965–1982
Luong Dung N, Appeltauer J (1992) Repräsentative Bruchkriterien in der Kaltmassivumformung metallischer Werkstoffe. Forschung im Ingenieurwesen-Eng Res 58(3):54–60
Maire E, Bouaziz O, Di Michiel M, Verdu C (2008) Initiation and growth of damage in a dual-phase steel observed by X-ray microtomography. Acta Mater 56:4954–4964
Margolin H (1978) Void formation, void growth and tensile fracture in Ti-6Al-4V. Metall Trans A 9A:781–790
Marini B (1985) Ductile rupture of A508 steel under non-radial loading. Eng Fract Mech 22(3):375–386
Marini B, Mudry F, Pineau A (1985) Experimental study of cavity growth in ductile rupture. Eng Fract Mech 22(6):989–996
McClintock F (1968) A criterion for ductile fracture by the grwoth of holes. J Appl Mech 363–371
Mediavilla J, Peerlings R, Geers M (2004) Application of a gradient ductile damage model to metal forming processes including crack propagation and mesh adaptivity. In: 11th international conference on sracture
Menzemer C, Srivatsan T, Al-Hajri M, Ortiz R (2000) The impact toughness and tensile properties of 8320 steel. Mater Sci Eng, A 289:198–207
Molnar D (2011) Private communications. IMWF Universität Stuttgart
Morgeneyer T, Proudhon H, Besson J (2010) Study of the flat to slant crack transition in ductile thin sheet material: Simulations and experiments. In: Proceedings of the 18th European conference on fracture
Mudry F (1987) A local approach to cleavage fracture. Nucl Eng Des 105(1):65–76
Münstermann S, Langenberg P, Seidenfuss M (2005) Numerische Bestimmung von duktilen Rissinitiierungskennwerten unter Berücksichtigung der Mikrostruktur. DVM-Bericht 237 “Technische Sicherheit, Zuverlässigkeit und Lebensdauer”:85–99
Münstermann, S. (2006) Numerische Beschreibung des duktilen Versagensverhalten von hochfesten Baustählen unter Berücksichtigung der Mikrostruktur. Dissertation, IEHK, RWTH-Aachen
Nahshon K, Hutchinson J (2008) Modification of the Gurson model for shear failure. Eur J Mech A Solids 27:1–17
Needleman A (1987) Continuum model for void nucleation by inclusion debonding. J Appl Mech 54(3):525–531
Needleman A, Tvergaard V (1995) Analysis of a brittle-ductile transition under dynamic shear loading. Int J Solids Struct 32(17):2571–2590
Nikitin L (1996) Softening solids: reality or misinterpretation? Technische Mechanik 16(1):86–96
Nonn A (2009) Experimentelle und numerische Analyse des Schädigungsverhaltens von Hybridlaserschweißverbindungen. Dissertation, Rheinisch-Westfälische Technische Hochschule Aachen
Nonn A, Kalwa C (2010) Modelling of damage behaviour of high strength pipeline steel. In: 18th European conference on fracture
Ockewitz A, Sun D-Z, Klamser H, Malcher D (2006) Damage modelling of automobile components of aluminium materials under crash loading. 5. LS-DYNA Anwenderforum, Ulm 2006, pp 1–12
Ortiz M, Leroy Y, Needleman A (1987) A finite element method for localized failure analysis. Comput Methods Appl Mech Eng 61(2):189–214
Oyane M (1972) Criteria of ductile fracture strain. Jpn Soc Mech Eng 15(90):1507–1513
Pan J, Saje M, Needleman A (1983) Localization of deformation in rate sensitive porous plastic solids. Int J Fract 21:261–278
Pardoen T, Hutchinson J (2000) An extended model for void growth and coalescence. J Mech Phys Solids 48:2467–2512
Pardoen T, Hutchinson J (2003) Micromechanics-based model for trends in toughness of ductile metals. Acta Mater 51:133–148
Pardoen T (2006) Numerical simulation of low stress triaxiality ductile fracture. Comput Struct 84:1641–1650
Pardoen T (1998) Experimental and numerical comparison of void growth models and void coalescence criteria for the prediction of ductile fracture in copper bars. Acta Mater 46(2):541–552
Pavankumar T, Samal M, Chattopadhyay J, Dutta B, Kushwaha H, Roos E, Seidenfuss M (2005) Transferability of fracture parameters from specimens to component level. Int J Press Vessels Pip 82:386–399
Peerlings R, de Borst R, Brekelmans W, de Vree J (1996) Gradient enhanced damage for quasi-brittle materials. Int J Numer Meth Eng 39(19):3391–3403
Peerlings R, Geers M, de Borst R, Brekelmans W (2001) A critical comparison of nonlocal and gradient-enhanced softening continua. Int J Solids Struct 38(44–45):7723–7746
Perrin G, Leblond J (1990) Analytical study of a hollow sphere made of plastic porous material and subjected to hydrostatic tension-application to some problems in ductile fracture of metals. Int J Plast 6:677–699
Pettermann H (2000) Numerical simulations of a compositionally graded structure using a hierarchical approach. Mat Sci Eng, A276 276:277−282
Pijaudier-Cabot G, Bazant ZP (1987) Nonlocal damage theory. J Eng Mech 113(10):1512–1533
Pijaudier-Cabot G, Baant ZP, Tabbara M (1988) Comparison of variousmodels for strain-softening. Eng Comput 5(2):141–150
Pijaudier-Cabot G, Benallal A (1993) Strain localization and bifurcation in a nonlocal continuum. Int J Solids Struct 30(13):1761–1775
Pineau A., Joly P (1991) Local versus global approaches to elastic-plastic fracture mechanics. Application to ferritic steels and a cast duplex stainless steel, components—fundamentals and applications. In: ESIS/EGF9, pp 381–414
Pineau A (1997) Modelling of scatter and size effects in ductile and brittle fracture. In: Transactions of the 14th international conference on SMiRT
Pineau A (2006) Development of the local approach to fracture over the past 25 years: theory and applications. Int J Fract 138(1):139–166
Pospiech J (1995) Ductile fracture of carbon steels: a review. J Mater Eng Perform 4(1):82–89
Potirniche G, Horstemeyer M, Wagner G, Gullett P (2006) A molecular dynamics study of void growth and coalescence in single crystal nickel. Int J Plast 22:257–278
Poussard C, Sainte–Catherine C, Galon P, Forget P (2002) Finite element simulations of sub-size charpy tests and associated transferability to toughness results. In: Francois D, Pineau A (eds) Charpy to present impact testing. Elsevier science, London, pp 469–478
Poussard C, Seidenfuss M (1997) On the simulation of ductile crack growth using the Rousselier model. In: Transactions of the 14th international conference on structural mechanics in reactor technology, pp 673–680
Prahl U, Papaefthymiou S, Uthaisangsuk V, Bleck W, Sietsma J, van der Zwaag S (2007) Micromechanics-based modelling of properties and failure of multiphase steels. Comput Mater Sci 39:17–22
Puttik K (1959) Ductile fracture in metals. Phil Mag 4:964–969
Rabotnov Y (1968) Creep rupture. Applied mechanics. In: Proceedings of the twelfth international congress of applied mechanics, pp 342–349
Reusch F (2003) Entwicklung und Anwendung eines nicht-lokalen Materialmodells zur Simulation duktiler Schädigung in metallischen Werkstoffen. Dissertation, Universität Dortmund. ISBN 249591204
Reusch F, Svendsen B, Klingbeil D (2003) A non-local extension of Gursonbased ductile damagemodeling. Comput Mater Sci 26:219–229
Rice J, Tracey D (1969) On the ductile enlargement of voids in triaxial stress fields. J Mech Phys Solids 17:201–217
Rivalin F, Pineau A, Di Fant M, Besson J (2001) Ductile tearing of pipeline-steel wide plates: I. Dynamic and quasi-static experiments. Eng Fract Mech 68:329–345
Roberts W, Lehtinen B, Easterling KE (1976) An in situ SEM study of void development around inclusions in steel during plastic deformation. Acta Metall 24:745–758
Roos E, Seebich HP, Seidenfuss M, Schmauder S, Kizler P (2005) Effect of variation of microstructure on fracture mechanics parameters. In: 3rd Indo-German seminar on “advances in structural integrity & safety”, Paper J03: S. mechanics
Roos E, Eisele U, Lammert R, Restemeyer D, Schuler X, Seebich H-P, Seidenfuß M, Silcher H, Stumpfrock L (2006) Reaktorsicherheitsforschung – Vorhaben-Nr. 1501 240: Kritische Überprüfung des Masterkurve-Ansatzes im Hinblick auf die Anwendung bei deutschen Kernkraftwerken. MPA Universität Stuttgart
Roos E, Seidenfuss M, Krämer D, Krolop S, Eisele U, Hindenlang U (1991) Application and evaluation of different numerical methods for determining crack resistance curves. Nucl Eng Des 130:297–308
Rösch L (1969) Relationship between precipitation and dimple fracture in an 18 percent nickel maraging steel. Electron microfractography, In: ASTM STP453, pp 3–32
Rosenfield A (1972) Fracture of steels containing pearlite. Metall Trans 3:2797–2804
Roth S, Kuna M. (2011) Numerical study on interfacial damage of sprayed coatings due to thermo-mechanical fatigue. In: Proceedings of the XI international conference on computational plasticity
Rousselier G (2001) Dissipation in porous metal plasticity and ductile fracture. J Mech Phys Solids 49:1727–1746
Rousselier G, Pastor J, Bilger N, Leclercq S (2004) Recent results on ductile fracture modeling at the macro and microscales. In: 11th international conference on fracture
Rousselier G, Leclercq S (2006) A simplified “polycrystalline” model for viscoplastic and damage finite element analyses. Int J Plast 22:685–712
Rousselier G (1981) Finite deformation constitutive relations including ductile fracture damage. Three-dimensional constitutive relations and ductile fracture. North-Holland Publishing Company, Holland, pp 331–355
Rousselier G (1987) Ductile fracture models and their potential in local approach of fracture. Nucl Eng Des 105:97–111
Rudd RE, Belak JF (2002) Void nucleation and associated plasticity in dynamic fracture of polycrystalline copper: an atomistic simulation. Comput Mater Sci 24:148–153
Rudnicki, J. W., Rice J.R. (1975) Conditions for the localization of deformation in pressure-sensitive dilatant materials. J Mech Phys Solids 23(6):371–394
Ruggieri C, Dodds R Jr (1996) A transferability model for brittle fracture including constraint and ductile tearing effects: a probabilistic approach. Int J Fract 79:309–340
Sabirov I, Kolednik O (2005) The effect of inclusion size on the local conditions for void nucleation near a crack tip in a mild steel. Scripta Mater 53:1373–1378
Sainte–Catherine C, Poussard C, Vodinh J, Schill R, Hourdequin N, Galon P, Forget P (2002) Finite element simulations and empirical correlation for Charpy-V and subsize Charpy tests on an unirradiated low-alloy RPV ferritic steel. small specimen test techniques 4. In: ASTM STP 1418, pp 107–136
Samal, MK (2007) Nonlocal damage models for structural integrity analysis. Dissertation, Universität Stuttgart
Samal M, Seidenfuss M, Roos E, Dutta B, Kushwaha H (2008) Finite element formulation of a new nonlocal damagemodel. Finite Elem Anal Des 44(6–7):358–371
Samal M, Seidenfuss M, Roos E, Dutta B, Kushwaha H (2008) A mesh-independent Gurson–Tvergaard–Needleman damage model and its application in simulating ductile fracture behavior. Proc IMechE. Part C: J Mech Eng Sci 223:283–292
Schiffmann R (2001) Experimentelle Bestimmung und modellmässige Beschreibung der Schädigung beim Gleitbruch von Stählen. Dissertation, IEHK, RWTH-Aachen
Scheyvaerts F, Pardoen T, Onck P (2010) A new model for void coalescence by internal necking. Int J Damage Mech 19:95–126
Scheyvaerts F, Onck P, Tekoglu C, Pardoen T (2011) The growth and coalescence of llipsoidal voids in plane strain under combined shear and tension. J Mech Phys Solids 59:373–397
Scheil E, Schnell R (1952) Die Verformbarkeit von Schlackeneinschlüssen im Stahl und ihre Bedeutung für die Beurteilung von Schmiedestücken. Stahl und Eisen
Schlüter N (1997) Einfluss der Beanspruchung und des Gefüges auf die lokale Schädigung beim Gleitbruch von Baustählen. Dissertation, IEHK, RWTH Aachen
Schmitt W, Keim E, Sun D-Z, Blauel J, Nagel G (1999) Load-carrying capacity and crack resistance of a cladding by the Sigma-oscillating wire technique. Nucl Eng Des 190:149–158
Seebich H-P (2007) Mikromechanisch basierte Schädigungsmodelle zur Beschreibung des Versagensablaufs ferritischer Bauteile. dissertation, Universität Stuttgart
Seidenfuß M (1992) Untersuchungen zur Beschreibung des Versagensverhaltens mit Hilfe von Schädigungsmodellen am Beispiel des Werkstoffes 20 MnMoNi 5 5. Dissertation, Fakultät Energietechnik, Universität Stuttgart
Seidenfuß M, Steglich D, Heerens J (1998) Beschreibung des Verhaltens von Al3Ti-partikelverstärktem Aluminium durch zwei verschiedene Schädigungsmodelle. DVM-Bericht 230:59–72
Seidenfuß M, Elsäßer K (1999) MPA/VGB Forschungsvorhaben 5.4.1: Analytische Ermittlung des Bruchverhaltens austenitischer Rohrleitungen - Local Approach -- Teilschritt 2 : Teilbericht 5.4.1-2: Bestimmung der Schädigungsparameter für den austenitischen Rohrleitungswerkstoff 1.4541. MPA Universität Stuttgart
Seidenfuß M, Turan K, Didra H-P, Kuna M (1999) MPA/VGB Forschungsvorhaben 5.4.1: Analytische Ermittlung des Bruchverhaltens austenitischer Rohrleitungen - Local Approach -- Teilschritt 1 : Teilbericht 5.4.1-1: Nachrechnung Schlitzversuch, Nachrechnung Oberflächenkerbe. MPA Universität Stuttgart
Seidenfuß M (2014) Schädigungsmechanische Modelle zur Beschreibung des Versagensablaufs in metallischen Bauteilen. Habilitationsschrift, Techn.-wiss. Ber., MPA Universität Stuttgart
Seppälä E, Belak J, Rudd R (2004) Onset of void coalescence during dynamic fracture of ductile metals. Phys Rev Lett 93:24
Shi Y (1989) Critical void growth for ductile rupture of steel welds. Eng Fract Mech 34(4):901–907
Shi Y, Barnby J, Nadkarni A (1991) Void Growth at ductile crack initiation of a structural steel. Eng Fract Mech 39(1):37–44
Shterenlikht A, Howard I (2006) The cafe model of fracture—application to a tmcr steel. Fatigue Fract Eng Mater Struct 29(9–10):770–787
Simatos A (2010) Methode XFEM pour la modelisation de grandes propagations de fissure en dechirure ductile: transition d’un milieu continu vers une fissure via un modele de zone cohesive pour le modele de Rousselier. Dissertation, Mecanique, Energétique, Génie Civil, Acoustique, L’Institut National des Sciences Appliquées de Lyon
Soppa E, Schmauder S, Fischer G (2004) Particle cracking and debonding criteria in Al/Al2O3 composites. In: Proceedings of the sixth international conference for mesomechanics, pp 312–317
Soppa E, Fischer G, Seidenfuß M, Lammert R, Wackenhut G, Diem H (2008) Deformation and damage in Al based composites, FE simulations and experiments. Aluminium Alloys—Their Phys Prop 2:1225–1231
Soppa E, Nellesen J, Romanova V, Fischer G, Crostack H-A, Beckmann F (2010) Impact of 3D-model thickness on FE-simulations of microstructure. Mater Sci Eng, A 527(3):802–811
Springmann M, Kuna M (2003) Identification of material parameters of the Rousselier model by non-linear optimization. Comput Mater Sci 26:202–209
Springmann M (2005) Identifikation von Materialparametern schädigungsmechanischer Gesetze unter Einbeziehung der Dehnungslokalisierung. Dissertation, Technische Universität Bergakademie Freiberg
Springmann M, Kuna M (2005) Identification of material parameters of the Gurson-Tvergaard-Needleman model by combined experimental and numerical techniques. Comput Mater Sci 33:501–509
Steglich D, Pirondi A, Bonora N, Brocks W (2005) Micromechanical modelling of cyclic plasticity incorporating damage. Int J Solids Struct 42:337–351
Steglich D, Wafai H, Besson J (2010) Interaction between anisotropic plastic deformation and damage evolution in Al 2198 sheet metal. Eng Fract Mech 77(17):3501−3518
Steglich D (1999) Bestimmung von mikrostrukturellen Parametern in Schädigungsmodellen für duktile Metalle. Dissertation, Technische Universität Berlin
Steinmann P (1999) Formulation and computation of geometrically non-linear gradient damage. Int J Numer Meth Eng 46(5):757–779
Steinmann P, Larsson R, Runesson K (1997) On the localization properties of multiplicative hyperelasto-plastic continua with strong discontinuities. Int J Solids Struct 34(8):969–990
Stroppe H (1981) Ermittlung der Bruchzähigkeit duktiler Werkstoffe aus Parametern der Mikrostruktur und der Fließkurve. Neue Hütte, Heft 12:446–448
Sun D-Z, Siegele D, Voss B, Schmitt W (1989) Application of local damage models to the numerical analysis of ductile rupture. Fatigue Fract Eng Mater Struct 12(3):201–212
Sun D-Z, Hönig A, Böhme W, Schmitt W (1995) Application of micromechanical models to the analysis of ductile fracture under dynamic loading. Fracture mechanics. In: ASTM STP 1220, vol 25, pp 343–356
Suquet P (1997) Continuum micromechanics. Springer, Wien, New York, pp 61-130. ISBN 3-211-82902-4
Tanguy B, Besson J (2002) An extension of the Rousselier model to viscoplastic temperature dependent materials. Int J Fract 116:81–101
Tanguy B, Besson J, Piques R, Pineau A (2005) Ductile to brittle transition of an A508 steel characterized by Charpy impact test: Part II: modeling of the Charpy transition curve. Eng Fract Mech 72:413–434
Tanguy B, Luu T, Perrin G, Pineau A, Besson J (2008) Plastic and damage behaviour of a high strength X100 pipeline steel: experiments and modeling. Int J Press Vessels Pip 85:322–335
Tanaka J (1970) Fractographic analysis of the low energy fracture of an aluminium alloy. Review of developments in plane strain fracture toughness testing. In: ASTM STP 463, pp 191–215
Tanaka K, Mori T, Nakamura T (1970) Cavity formation at the interface of a spherical inclusion in a plastically deformed matrix. Phil Mag 21(170):267–279
Thomson C, Worswick M, Pilkey A, Lloyd D (2003) Void coalescence within periodic clusters of particles. J Mech Phys Solids 51:127–146
Thomason P (1968) A theory for ductile fracture by internal necking of cavities. J Inst Metals 96:360–365
Thomason P (1985) A three-dimensional model for ductile fracture by the growth and coalescence of microvoids. Acta Metall 33(6):1087–1095
Thomason P (1985) Three-dimensional models for the plastic limit-loads at incipient failure of the intervoid matrix in ductile porous solids. Acta Metall 33(6):1079–1085
Thomason P (1990) Ductile fracture of metals, 1st edn. Pergamon Press, Oxford. ISBN 0-08-040178-3
Thomason P (1998) A view on ductile-fracture modeling. Fatigue Fract Eng Mater Struct 21:1105–1122
Tipper C (1948) The fracture of metals. Metallurgia: Br J Metals 133–137
Tvergaard V (1981) Influence of voids on shear band instabilities under plane strain conditions. Int J Fract 17(4):389–407
Tvergaard V (1982) Material failure by void coalescence in localized shear bands. Int J Solids Struct 18(8):659–672
Tvergaard V (1982) On localization in ductile materials containing spherical voids. Int J Fract 18:237–252
Tvergaard V, Needleman A (1995) Effects of nonlocal damage in porous plastic solids. Int J Solids Struct 32(8-9):1063–1077
Tvergaard V, Needleman A (1984) Analysis of the cup-cone fracture in a round tensile bar. Acta Metall 32(1):157–169
Van Stone R, Cox TB, Low J Jr, Psioda J (1985) Microstructural aspects of fracture by dimpled rupture. Int Metals Rev 30:157–179
Verein Deutscher Eisenhüttenleute (1996) Erscheinungsformen von Rissen und Brüchen metallischer Werkstoffe, 2nd edn. Verlag Stahleisen GmbH, Düsseldorf
Weck A, Wilkinson D, Toda H, Maire E (2006) 2D and 3D visualization of ductile fracture. Adv Eng Mater 8:469–472
Weck A (2007) The role of coalescence on ductile fracture. Dissertation, McMaster University, Hamilton Ontario
Weck A, Segurado J, LLorca J, Wilkinson D, Böhm H (2008) Numerical simulations of void linkage in model materials using a nonlocal ductile damage approximation. Int J Fract 148:205–219
Weck A, Wilkinson D (2008) Experimental investigation of void coalescence in metallic sheets containing laser drilled holes. Acta Mater 56:1774–1784
Weinrich P, French I (1976) The influence of hydrostatic pressure on the fracture mechanisms of sheet tensile specimens of copper and brass. Acta Metall 24:317–322
Wilson D (1971) Effects of second-phase particles on formability at room temperature, Effect of second-phase particles on the mechanical properties of steel. Scarborough GB 28–36
Wilsdorf H (1975) Void initiation, growth, and coalescence in ductile fracture of metals. J Electron Mater 4(5):791–809
Wood I (1963) Fracture and deformation of sulfide inclusions in steel. Trans ASME 56:770–773
Xia L, Shih CF (1995) Ductile crack growth—I. A numerical study using computational cells with microstructurally-based length scales. J Mech Phys Solids 43(2):233–259
Zhang ZL, Thaulow C, Odegard J (2000) A complete Gurson model approach for ductile fracture. Eng Fract Mech 67:155–168
Zhang ZL, Skallerud B (2010) Void coalescence with and without prestrain history. Int J Damage Mech 19:153–174
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer International Publishing Switzerland
About this paper
Cite this paper
Seidenfuss, M., Linse, T. (2016). Micromechanical-Based Models for Describing Damage of Ferritic Steels. In: Hütter, G., Zybell, L. (eds) Recent Trends in Fracture and Damage Mechanics. Springer, Cham. https://doi.org/10.1007/978-3-319-21467-2_16
Download citation
DOI: https://doi.org/10.1007/978-3-319-21467-2_16
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-21466-5
Online ISBN: 978-3-319-21467-2
eBook Packages: EngineeringEngineering (R0)