Abstract
The usage of synchrophasors (synchronized phasors) is considered to be the most promising tool to monitor dynamics of modern electric power systems. Synchrophasors are measured by synchronized measurement units, such as Phasor Measurement Units (PMUs), providing high-speed measurements of voltage, current, and frequency. The PMU, as the most sophisticated time-synchronized tool, has been made possible by advancements in computer technology and availability of Global Positioning System (GPS) signals. Application of synchrophasor technology for wide-area measurement, monitoring, analysis and control of electric power systems can enhance its reliability, efficiency, and resilience. To achieve these benefits synchrophasor technology must be matched by advancements in other areas such as: data communications, instrument transformers accuracy, etc. One very important area is in developing methods and applications, i.e., software that uses the data provided by the PMUs. In this area utilities need huge help from academia. This is why Salt River Project (SRP) has established a joint research program with Arizona State University (ASU) and initiated several research projects. So far in many of them Prof. Heydt has been the Principal Investigator. In this chapter a summary of the results of a few such projects is given:
-
State estimation improvements.
-
The time skew problem in PMU measurements.
-
The integrated calibration of synchronized phasor measurements data.
-
Impact of PMU measurement buffer length on state estimation.
-
Synchronous generator parameter identification.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Phadke AG (2002) Synchronized phasor measurements-a historical overview. In: Transmission and distribution conference and exhibition 2002: Asia Pacific, vol. 1. IEEE/PES, pp 476–479
Lewandowski W, Azoubib J, Klepczynski WJ (1999) GPS: primary tool for time transfer. Proc IEEE 87:163–172
IEEE Standard (1995) IEEE standard for synchrophasor for power systems – IEEE Std. IEEE, Piscataway, NJ, pp 1344–1995
IEEE Standard (2006) IEEE standard for synchrophasors for power systems – IEEE Std C37.118-2005. IEEE, Piscataway, NJ
IEEE Standard (2011) C37.118.1-2011 – IEEE standard for synchrophasor measurements for power systems. IEEE, Piscataway, NJ
IEEE Standard (2011) C371182-2011 – IEEE standard for synchrophasor data transfer for power systems. IEEE, Piscataway, NJ
North American Reliability Corporation. www.nerc.com.
Phadke AG, Thorp JS (2008) Synchronized phasor measurements and their applications. Power electronics and power system. Springer, New York, NY
Kosterev DN, Taylor CW, Mittelstadt WA (1999) Model validation for the August 10, 1996 WSCC system outage. IEEE Trans Power Syst 14(3):967–979
Denegri GB, Invernizzi M, Milano F (2002) A security oriented approach to PMU positioning for advanced monitoring of a transmission grid. In: International conference on power system technology (PowerCon 2002), vol. 2, pp 798–803
Zivanovic R, Cairns C (1996) Implementation of PMU technology in state estimation: an overview. In: 4th IEEE AFRICON, vol. 2, pp 1006–1011
Ingram SBM, Matthews S, Meliopoulos AP, Cokkinides G (2004) "Use of phasor measurements, SCADA and IED data to improve the state estimation. 7th Fault and Disturbance Analysis Conference, Atlanta, GA
Rice M, Heydt GT (2006) Power system state estimation accuracy enhancement through the use of PMU measurements. In: Proceedings of the IEEE PES T&D conference 2006, Dallas, TX, pp. 1460–1466
Rice M, Heydt GT, Jiang W, Vittal V (2008) Design of state estimator measurements based on condition indicators, Electr Pow Compo Syst 36(7):665–679
Jiang W, Vittal V, Heydt GT (2007) A distributed state estimator utilizing synchronized phasor measurements. IEEE Trans Power Syst 22(2):563–571
Haughton D, Heydt GT (2013) A linear state estimation formulation for smart distribution systems. IEEE Trans Power Syst 28(2):1187–1195
Zhang Q, Vittal V, Heydt GT, Chakhchoukh Y, Logic N, Sturgill S (2012) The time skew problem in PMU measurements. IEEE Power and Energy Society General Meeting, San Diego, CA
Brown RG, Hwang PYC (1997) Introduction to random signals and applied Kalman filtering: with MATLAB exercises and solutions. Wiley, New York, NY
IEEE Standard (2008) C5713-2008 – IEEE standard requirements for instrument transformers. IEEE, Piscataway, NJ
American national standard requirements for power-line carrier coupling capacitors and coupling capacitor voltage transformers (CCVT), ANSI C93.1-1999, 1999
Zhang Q, Vittal V, Heydt GT, Logic N, Sturgill S (2011) The integrated calibration of synchronized phasor measurement data in power transmission systems. IEEE Trans Power Deliver 26(4):2573–2581
Zhang Q, Chakhchoukh Y, Vittal V, Heydt GT, Logic N, Sturgill S (2013) Impact of PMU measurement buffer length on state estimation and its optimization. IEEE Trans Power Syst 28(2):1657–1665
Shanmugan KS, Breipohl AM (1988) Random signals: detection, estimation and data analysis. Wiley, New York, NY
Chakhchoukh Y, Vittal V, Heydt GT (2014) PMU based state estimation by integrating correlation. IEEE Trans Power Syst 29(2):617–626
Murugesan V (2013) Error detection and error correction for PMU data as applied to state estimators. Master thesis, Arizona State University – School of Electrical, Computer and Energy Engineering
Kyriakides E, Heydt GT, Vittal V (2004) On-line estimation of synchronous generator parameters using a damper current observer and a graphic user interface. IEEE Trans Energ Convers 19(3):499–507
Lin K, Kyriakides E, Heydt GT, Logic N, Singh B (2010) Experience with synchronous generator parameter identification using a Kalman filter. IEEE Power and Energy Society General Meeting, Minneapolis, MN
Tumageanian A, Keyhani A (1995) Identification of synchronous machine linear parameters from standstill step voltage input data. IEEE Trans Energ Convers 10(2):232–240
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Logic, N. (2015). Synchrophasor Measurements. In: Kyriakides, E., Suryanarayanan, S., Vittal, V. (eds) Electric Power Engineering Research and Education. Power Electronics and Power Systems. Springer, Cham. https://doi.org/10.1007/978-3-319-17190-6_3
Download citation
DOI: https://doi.org/10.1007/978-3-319-17190-6_3
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-17189-0
Online ISBN: 978-3-319-17190-6
eBook Packages: EnergyEnergy (R0)