Abstract
A modeling study is conducted to evaluate the heat transfer capabilities of novel refrigerant clathrate-based phase change materials with salts and nanoparticles as additives. The formation of refrigerant clathrates is studied for both active and passive cooling applications. In this regard, the refrigerants, e.g., R134a, R141b, and R32 clathrates are studied at different refrigerant mass fractions since the solubility of refrigerants, in water, change with change in temperature. The sodium chloride and magnesium nitrate hexahydrate are used as salt additives. The nanoparticles of pure aluminum, copper, and graphene are also studied to investigate the improvement in their thermal properties. Some empirical correlations are used to predict the thermal conductivities of refrigerant clathrates and the improvement with the addition of additives. The results show that an increase in refrigerant mass fraction lowers the thermal conductivity of the refrigerant clathrate but not extensively. The addition of salts results in a minor improvement in thermal conductivity. The inclusion of nanoparticles significantly improved the thermal conductivity of the phase change material. It is also obtained that adding the nanoparticles improves the thermal conductivity more than the salts. The specific heat capacity, however, was not generally improved by the nanoparticles as it depended on the additive used.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Abbreviations
- CFC:
-
Chlorofluorocarbons
- C p :
-
Specific heat capacity, J/kg K
- D :
-
Dipole moment, Debye
- f :
-
Liquid fraction
- HCFC:
-
Hydro-chlorofluorocarbons
- HFC:
-
Hydrofluorocarbons
- h :
-
Volumetric enthalpy, J/m3
- k :
-
Thermal conductivity coefficient, W/m K
- M :
-
Molar mass, g/mol
- m :
-
Mass, kg
- PCM:
-
Phase change material
- Pr :
-
Prandtl number
- Q :
-
Heat, J
- T :
-
Temperature, K
- t :
-
Time, s
- TES:
-
Thermal energy storage
- x :
-
Mass fraction
- α :
-
Biot number
- δ :
-
Difference
- ρ :
-
Density, kg/m3
- λ :
-
Specific latent heat of fusion, J/kg
- β :
-
Thermal diffusivity, m2/s
- φ :
-
Volume fraction
- b:
-
Base fluid
- c:
-
Charging
- cm:
-
Critical
- i:
-
Initial
- m:
-
Mixture
References
Dincer I, Rosen MA (2002) Thermal energy storage—systems and applications. Wiley, Chichester
George A (1989) Hand book of thermal design. In: Guyer C (ed) Phase change thermal storage materials, chap 1. McGraw Hill, New York
Sloan ED (1990) Clathrate hydrates of natural gases. Marcel, New York
Nikbakhta F, Izadpanaha AA, Varaminianb F, Mohammadic AH (2012) Thermodynamic modeling of hydrate dissociation conditions for refrigerants R-134a, R-141b and R-152a. Int J Refrig 35:1914–1920
Mori YH, Isobe F (1991) A model for gas hydrate formation accompanying direct-contact evaporation of refrigerant drops in water. Int Commun Heat Mass Transfer 18:599–608
Bi YH, Guo TW, Zhu TY, Fan SS, Liang DQ, Zhang L (2004) Influence of volumetric-flow rate in the crystallizer on the gas-hydrate cool-storage process in a new gas-hydrate cool-storage system. Appl Energy 78:111–112
Inaba H (2000) New challenge in advanced thermal energy transportation using functionally thermal fluids. Int J Therm Sci 39:991–1003
Eslamimanesha A, Mohammadia AH, Richona D (2011) Thermodynamic model for predicting phase equilibria of simple clathrate hydrates of refrigerants. Chem Eng Sci 66:5439–5445
Guo KH, Shu BF, Zhang Y (1996) Transient behavior of energy charge–discharge and solid–liquid phase change in mixed gas-hydrate formation. In: Wang BX (ed) Heat transfer science and technology. Higher Education Press, Beijing, pp 728–733
Bi Y, Guo T, Zhu T, Zhang L, Chen L (2006) Influences of additives on the gas hydrate cool storage process in a new gas hydrate cool storage system. Energy Convers Manag 47:2974–2982
Bi Y, Guo T, Zhang L, Zhang H, Chen L (2009) Experimental study on cool release process of gas-hydrate with additives. Energy Build 41:120–124
Engineering ToolBox (2013) Refrigerants–ozone depletion (ODP) and global warming potential (GWP). http://www.engineeringtoolbox.com/Refrigerants-Environment-Properties-d_1220.html
Ro ST, Kim JY, Kim DS (1995) Thermal conductivity of R32 and its mixture with R134a. Int J Thermophys 16:1193–1201
Wua J, Wangb S (2012) Research on cool storage and release characteristics of R134a gas hydrate with additive. Energy Build 45:99–105
Murshed SMS, Leong KC, Yang C (2009) A combined model for the effective thermal conductivity of nanofluids. Appl Therm Eng 29:2477–2483
Duangthongsuk W, Wongwises S (2009) Measurement of temperature dependent thermal conductivity and viscosity of TiO2-water nanofluids. Exp Therm Fluid Sci 33:706–714
Moghadassi AR, Hosseini SM, Henneke DE (2010) Effect of CuO nanoparticles in enhancing the thermal conductivities of monoethylene glycol and paraffin fluids. Ind Eng Chem Res 49:1900–1904
Eastman JA, Choi SUS, Li S, Yu W, Thompson LJ (2001) Anomalously increased effective thermal conductivities of ethylene glycol-based nanofluids containing copper nanoparticles. Appl Phys Lett 78:718–720
Lia J, Liangb D, Guob K, Wangc R, Fanb S (2006) Formation and dissociation of HFC134a gas hydrate in nano-copper suspension. Energy Convers Manag 47:201–210
Dutil Y, Rousse DR, Salah NB, Lassue S, Zalewski L (2011) A review on phase-change materials: mathematical modeling and simulations. Renew Sustain Energy Rev 15:112–130
Phelan PE, Bhattacharya P, Prasher RS (2005) Nanofluids for heat transfer applications. Annu Rev Heat Transf 14:255–275
Prasher R, Bhattacharya P, Phelan PE (2006) Brownian-motion-based convective-conductive model for the effective thermal conductivity of nanofluids. J Heat Transf 128:588–595
Hernandez O (2001) SIDS initial assessment report for 12th SIAM. UNEP Publications, Paris
DuPont™ Suva® refrigerants (2004) Mutual solubility of select HCFCs and HFCs and water. DuPont, USA
Poolen LJV, Holcom CD, Niesen VG (1997) Critical temperature and density from liquid-vapor coexistence data: application to refrigerants R32, R124, and R152a. Fluid Phase Equilib 129:105–111
Papadaki M, Schmitt M, Seitz A, Stephan K, Taxis B, Wakeham WA (1993) Thermal conductivity of R134a and R141b within the temperature range 240–307 K at the saturation vapor pressure. Int J Thermophys 14:173–181
Benedito JCC, Guedes RC, Pai-Panandikerb RS, Castrob CAN (2001) Hydrogen bonding and the dipole moment of hydrofluorocarbons by density functional theory. Phys Chem Chem Phys 3:4200–4207
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Zafar, S., Dincer, I., Gadalla, M. (2015). Evaluation of Thermal Properties of Refrigerant Clathrates with Additives. In: Dincer, I., Colpan, C., Kizilkan, O., Ezan, M. (eds) Progress in Clean Energy, Volume 1. Springer, Cham. https://doi.org/10.1007/978-3-319-16709-1_17
Download citation
DOI: https://doi.org/10.1007/978-3-319-16709-1_17
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-16708-4
Online ISBN: 978-3-319-16709-1
eBook Packages: EnergyEnergy (R0)