Abstract
Over the past 50 years, numerous systems and technologies have been developed to allow the controlled release of drugs for treating a wide range of diseases. The aim is to enhance the effectiveness of the drugs, especially those with low water solubility, and to achieve their localized administration, avoiding overdoses that may generate drug resistance. In order to be effective, new-generation carrier materials must be able to overcome the host’s physicochemical and biological barriers. The objective of this chapter is to review nanomaterials developed as carriers of ciprofloxacin, which is used to treat numerous infections but has a low water solubility that hampers cell permeability. They include metal–organic frameworks, silica nanomaterials with various morphologies, hydrogels, and other nanomaterials of interest used as carriers for the controlled release of ciprofloxacin. These materials have potential biomedical applications in the treatment of bone, dental, gastrointestinal tract, and urinary infections and in wound healing, among others.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Abioye, A., Sanyaolu, A., Dudzinska, P., Adepoju-Bello, A. A., & Coker, H. A. B. (2020). Chitosan-induced synergy for extended antimicrobial potency and enhanced in vitro drug release of free base ciprofloxacin nanoplexes. Pharmaceutical Nanotechnology, 8(1), 33–53. https://doi.org/10.2174/2211738507666191021102256
Andrade, G. F., Faria, J. A. Q. A., Gomes, D. A., de Barros, A. L. B., Fernandes, R. S., Coelho, A. C. S., Takahashi, J. A., da Silva Cunha, A., & de Sousa, E. M. B. (2018). Mesoporous silica SBA-16/hydroxyapatite-based composite for ciprofloxacin delivery to bacterial bone infection. Journal of Sol-Gel Science and Technology, 85(2), 369–381. https://doi.org/10.1007/s10971-017-4557-y
Araichimani, P., Suresh Kumar, G., Prabu, K. M., Karunakaran, G., van Minh, N., Kolesnikov, E., Gorshenkov, M., & v. (2021). Amorphous silica nanoparticles derived from biowaste via microwave combustion for drug delivery. International Journal of Applied Ceramic Technology, 18(3), 583–589. https://doi.org/10.1111/ijac.13693
Arcieri, G. M., Becker, N., Esposito, B., Griffith, E., Heyd, A., Neumann, C., O’Brien, B., & Schacht, P. (1989). Safety of intravenous ciprofloxacin. The American Journal of Medicine, 87(5), S92–S97. https://doi.org/10.1016/0002-9343(89)90032-6
Bahram, M., Mohseni, N., & Moghtader, M. (2016). An introduction to hydrogels and some recent applications. In Emerging concepts in analysis and applications of hydrogels. IntechOpen. https://doi.org/10.5772/64301
Balarak, D., Mostafapour, F., & Azarpira, H. (2016). Adsorption kinetics and equilibrium of ciprofloxacin from aqueous solutions using Corylus avellana (Hazelnut) activated carbon. British Journal of Pharmaceutical Research, 13(3), 1–14. https://doi.org/10.9734/BJPR/2016/29357
Balfour, J. A., & Faulds, D. (1993). Oral ciprofloxacin. PharmacoEconomics, 3(5), 398–421. https://doi.org/10.2165/00019053-199303050-00007
Banoee, M., Seif, S., Nazari, Z. E., Jafari-Fesharaki, P., Shahverdi, H. R., Moballegh, A., Moghaddam, K. M., & Shahverdi, A. R. (2010). ZnO nanoparticles enhanced antibacterial activity of ciprofloxacin against Staphylococcus aureus and Escherichia coli. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 93B(2), 557–561. https://doi.org/10.1002/jbm.b.31615
Barenholz, Y. (Chezy). (2012). Doxil®—The first FDA-approved nano-drug: Lessons learned. Journal of Controlled Release, 160(2), 117–134. https://doi.org/10.1016/j.jconrel.2012.03.020
Belbekhouche, S., Poostforooshan, J., Shaban, M., Ferrara, B., Alphonse, V., Cascone, I., Bousserrhine, N., Courty, J., & Weber, A. P. (2020). Fabrication of large pore mesoporous silica microspheres by salt-assisted spray-drying method for enhanced antibacterial activity and pancreatic cancer treatment. International Journal of Pharmaceutics, 590, 119930. https://doi.org/10.1016/j.ijpharm.2020.119930
Bergan, T., Dalhoff, A., & Rohwedder, R. (1988). Pharmacokinetics of ciprofloxacin. Infection, 16(S1), S3–S13. https://doi.org/10.1007/BF01650500
Campoli-Richards, D. M., Monk, J. P., Price, A., Benfield, P., Todd, P. A., & Ward, A. (1988). Ciprofloxacin. Drugs, 35(4), 373–447. https://doi.org/10.2165/00003495-198835040-00003
ClinCal LLC. (2021). Ciprofloxacin, ClinCalc DrugStats Database, Version 2021.10. https://clincalc.com/DrugStats/Drugs/Ciprofloxacin
Dimatteo, R., Darling, N. J., & Segura, T. (2018). In situ forming injectable hydrogels for drug delivery and wound repair. Advanced Drug Delivery Reviews, 127, 167–184. https://doi.org/10.1016/J.ADDR.2018.03.007
Ebrahimi, R., & Salavaty, M. (2018). Controlled drug delivery of ciprofloxacin from ultrasonic hydrogel. E-Polymers, 18(2), 187–195. https://doi.org/10.1515/epoly-2017-0123
Ehlert, N., Badar, M., Christel, A., Lohmeier, S. J., Luessenhop, T., Stieve, M., Lenarz, T., Mueller, P. P., & Behrens, P. (2011). Mesoporous silica coatings for controlled release of the antibiotic ciprofloxacin from implants. Journal of Materials Chemistry, 21(3), 752–760. https://doi.org/10.1039/C0JM01487G
Ehlert, N., Mueller, P. P., Stieve, M., Lenarz, T., & Behrens, P. (2013). Mesoporous silica films as a novel biomaterial: Applications in the middle ear. Chemical Society Reviews, 42(9), 3847. https://doi.org/10.1039/c3cs35359a
Esfahanian, M., Ghasemzadeh, M. A., & Razavian, S. M. H. (2019). Synthesis, identification and application of the novel metal-organic framework Fe3O4@PAA@ZIF-8 for the drug delivery of ciprofloxacin and investigation of antibacterial activity. Artificial Cells, Nanomedicine, and Biotechnology, 47(1), 2024–2030. https://doi.org/10.1080/21691401.2019.1617729
Fass, R. J. (1990). Ciprofloxacin. Postgraduate Medicine, 87(8), 117–131. https://doi.org/10.1080/00325481.1990.11704677
Flórez Beledo, J., Mediavilla Martínez, A., & Armijo Simón, J. A. (2013). Farmacología humana—6th Edition. https://www.elsevier.com/books/farmacologia-humana/florez-beledo/978-84-458-2316-3
Gaharwar, A. K., Peppas, N. A., & Khademhosseini, A. (2014). Nanocomposite hydrogels for biomedical applications. Biotechnology and Bioengineering, 111(3), 441–453. https://doi.org/10.1002/BIT.25160
García, M. C., Cuggino, J. C., Rosset, C. I., Páez, P. L., Strumia, M. C., Manzo, R. H., Alovero, F. L., Alvarez Igarzabal, C. I., & Jimenez-Kairuz, A. F. (2016). A novel gel based on an ionic complex from a dendronized polymer and ciprofloxacin: Evaluation of its use for controlled topical drug release. Materials Science and Engineering C, 69, 236–246. https://doi.org/10.1016/j.msec.2016.06.071
García-Reyes, C. B., Salazar-Rábago, J. J., Sánchez-Polo, M., Loredo-Cancino, M., & Leyva-Ramos, R. (2021). Ciprofloxacin, ranitidine, and chlorphenamine removal from aqueous solution by adsorption. Mechanistic and regeneration analysis. Environmental Technology and Innovation, 24, 102060. https://doi.org/10.1016/j.eti.2021.102060
Gessner, I., Krakor, E., Jurewicz, A., Wulff, V., Kling, L., Christiansen, S., Brodusch, N., Gauvin, R., Wortmann, L., Wolke, M., Plum, G., Schauss, A., Krautwurst, J., Ruschewitz, U., Ilyas, S., & Mathur, S. (2018). Hollow silica capsules for amphiphilic transport and sustained delivery of antibiotic and anticancer drugs. RSC Advances, 8(44), 24883–24892. https://doi.org/10.1039/C8RA03716G
Ghaith, E.-S., & Connolly, S. (2014). Evaluation of mesoporous SBA-15 for the controlled delivery of ciprofloxacin hydrochloride. Bioinspired, Biomimetic and Nanobiomaterials, 3(4), 199–207. https://doi.org/10.1680/bbn.14.00002
Ghauri, Z. H., Islam, A., Qadir, M. A., Gull, N., Haider, B., Khan, R. U., & Riaz, T. (2021). Development and evaluation of pH-sensitive biodegradable ternary blended hydrogel films (chitosan/guar gum/PVP) for drug delivery application. Scientific Reports, 11(1), 21255. https://doi.org/10.1038/s41598-021-00452-x
Ghosh, S. K., Das, A., Basu, A., Halder, A., Das, S., Basu, S., Abdullah, M. F., Mukherjee, A., & Kundu, S. (2018). Semi-interpenetrating hydrogels from carboxymethyl guar gum and gelatin for ciprofloxacin sustained release. International Journal of Biological Macromolecules, 120, 1823–1833. https://doi.org/10.1016/j.ijbiomac.2018.09.212
Günday, C., Anand, S., Gencer, H. B., Munafò, S., Moroni, L., Fusco, A., Donnarumma, G., Ricci, C., Hatir, P. C., Türeli, N. G., Türeli, A. E., Mota, C., & Danti, S. (2020). Ciprofloxacin-loaded polymeric nanoparticles incorporated electrospun fibers for drug delivery in tissue engineering applications. Drug Delivery and Translational Research, 10(3), 706–720. https://doi.org/10.1007/s13346-020-00736-1
Günday Türeli, N., Torge, A., Juntke, J., Schwarz, B. C., Schneider-Daum, N., Türeli, A. E., Lehr, C.-M., & Schneider, M. (2017). Ciprofloxacin-loaded PLGA nanoparticles against cystic fibrosis P. aeruginosa lung infections. European Journal of Pharmaceutics and Biopharmaceutics, 117, 363–371. https://doi.org/10.1016/j.ejpb.2017.04.032
Hasan, Md. N., Bera, A., Maji, T. K., & Pal, S. K. (2021). Sensitization of nontoxic MOF for their potential drug delivery application against microbial infection. Inorganica Chimica Acta, 523, 120381. https://doi.org/10.1016/j.ica.2021.120381
Hashemikia, S., Farhangpazhouh, F., Parsa, M., Hasan, M., Hassanzadeh, A., & Hamidi, M. (2021). Fabrication of ciprofloxacin-loaded chitosan/polyethylene oxide/silica nanofibers for wound dressing application: In vitro and in vivo evaluations. International Journal of Pharmaceutics, 597, 120313. https://doi.org/10.1016/j.ijpharm.2021.120313
Hezma, A. M., Elkhooly, T. A., & El-Bahy, G. S. (2020). Fabrication and characterization of bioactive chitosan microspheres incorporated with mesoporous silica nanoparticles for biomedical applications. Journal of Porous Materials, 27(2), 555–562. https://doi.org/10.1007/s10934-019-00837-4
Hoffman, A. S. (2012). Hydrogels for biomedical applications. Advanced Drug Delivery Reviews, 64(SUPPL.), 18–23. https://doi.org/10.1016/J.ADDR.2012.09.010
Hussein, E. A., & Kareem, S. H. (2021). Mesoporous silica nanoparticles as a system for ciprofloxacin drug delivery; kinetic of adsorption and releasing. Baghdad Science Journal, 18(2). https://doi.org/10.21123/bsj.2021.18.2.0357
Ji, X.-J., Luan, G.-F., Lyu, J.-C., Cui, L.-Y., Li, S.-Q., Zeng, R.-C., & Wang, Z.-L. (2020). Corrosion resistance and tunable release of ciprofloxacin-loaded multilayers on magnesium alloy: Effects of SiO2 nanoparticles. Applied Surface Science, 508, 145240. https://doi.org/10.1016/j.apsusc.2019.145240
Kawabata, Y., Wada, K., Nakatani, M., Yamada, S., & Onoue, S. (2011). Formulation design for poorly water-soluble drugs based on biopharmaceutics classification system: Basic approaches and practical applications. International Journal of Pharmaceutics, 420(1), 1–10. https://doi.org/10.1016/j.ijpharm.2011.08.032
Khan, N. A., Hasan, Z., & Jhung, S. H. (2013). Adsorptive removal of hazardous materials using metal-organic frameworks (MOFs): A review. Journal of Hazardous Materials, 244–245, 444–456. https://doi.org/10.1016/j.jhazmat.2012.11.011
Korzeniowska, A., Strzempek, W., Makowski, W., Menaszek, E., Roth, W. J., & Gil, B. (2020). Incorporation and release of a model drug, ciprofloxacin, from non-modified SBA-15 molecular sieves with different pore sizes. Microporous and Mesoporous Materials, 294, 109903. https://doi.org/10.1016/j.micromeso.2019.109903
LeBel, M. (1988). Ciprofloxacin: Chemistry, mechanism of action, resistance, antimicrobial spectrum, pharmacokinetics, clinical trials, and adverse reactions. Pharmacotherapy: The Journal of Human Pharmacology and Drug Therapy 8(1), 3–30. https://doi.org/10.1002/j.1875-9114.1988.tb04058.x
Lensing, R., Bleich, A., Smoczek, A., Glage, S., Ehlert, N., Luessenhop, T., Behrens, P., Müller, P. P., Kietzmann, M., & Stieve, M. (2013). Efficacy of nanoporous silica coatings on middle ear prostheses as a delivery system for antibiotics: An animal study in rabbits. Acta Biomaterialia, 9(1), 4815–4825. https://doi.org/10.1016/j.actbio.2012.08.016
Li, X. X., Zhong, H., Li, X. X., Jia, F., Cheng, Z., Zhang, L., Yin, J., An, L., & Guo, L. (2014). Synthesis of attapulgite/N-isopropylacrylamide and its use in drug release. Materials Science and Engineering C, 45, 170–175. https://doi.org/10.1016/j.msec.2014.08.056
Nabipour, H., Sadr, M. H., & Bardajee, G. R. (2017). Synthesis and characterization of nanoscale zeolitic imidazolate frameworks with ciprofloxacin and their applications as antimicrobial agents. New Journal of Chemistry, 41(15), 7364–7370. https://doi.org/10.1039/C7NJ00606C
Narasimha Reddy, M., Cheralathan, K. K., & Sasikumar, S. (2015). In vitro bioactivity and drug release kinetics studies of mesoporous silica-biopolymer composites. Journal of Porous Materials, 22(6), 1465–1472. https://doi.org/10.1007/s10934-015-0027-5
Nasrabadi, M., Ghasemzadeh, M. A., & Zand Monfared, M. R. (2019). The preparation and characterization of UiO-66 metal–organic frameworks for the delivery of the drug ciprofloxacin and an evaluation of their antibacterial activities. New Journal of Chemistry, 43(40), 16033–16040. https://doi.org/10.1039/C9NJ03216A
Nawaz, A., Ali, S. M., Rana, N. F., Tanweer, T., Batool, A., Webster, T. J., Menaa, F., Riaz, S., Rehman, Z., Batool, F., Fatima, M., Maryam, T., Shafique, I., Saleem, A., & Iqbal, A. (2021). Ciprofloxacin-loaded gold nanoparticles against antimicrobial resistance: An In Vivo assessment. Nanomaterials, 11(11), 3152. https://doi.org/10.3390/nano11113152
Olawale, M. D., Tella, A. C., Obaleye, J. A., & Olatunji, J. S. (2020). Synthesis, characterization and crystal structure of a copper-glutamate metal organic framework (MOF) and its adsorptive removal of ciprofloxacin drug from aqueous solution. New Journal of Chemistry, 44(10), 3961–3969. https://doi.org/10.1039/D0NJ00515K
Padhi, J. R., Nayak, D., Nanda, A., Rauta, P. R., Ashe, S., & Nayak, B. (2016). Development of highly biocompatible Gelatin & i-Carrageenan based composite hydrogels: In depth physiochemical analysis for biomedical applications. Carbohydrate Polymers, 153, 292–301. https://doi.org/10.1016/j.carbpol.2016.07.098
Prasad Dewangan, R., Kumari, S., Kumar Mahto, A., Jain, A., & Pasha, S. (2020). Self-assembly and hydrogelation of N-terminal modified tetrapeptide for sustained release and synergistic action of antibacterial drugs against methicillin resistant S. aureus. Bioorganic Chemistry, 102, 104052. https://doi.org/10.1016/j.bioorg.2020.104052
Prusty, K., Biswal, A., Biswal, S. B., & Swain, S. K. (2019). Synthesis of soy protein/polyacrylamide nanocomposite hydrogels for delivery of ciprofloxacin drug. Materials Chemistry and Physics, 234, 378–389. https://doi.org/10.1016/j.matchemphys.2019.05.038
Ramos, V. C., Han, W., Zhang, X., Zhang, S., & Yeung, K. L. (2020). Supported ionic liquids for air purification. Current Opinion in Green and Sustainable Chemistry, 25, 100391. https://doi.org/10.1016/j.cogsc.2020.100391
Rehman, A., Patrick, W. M., & Lamont, I. L. (2019). Mechanisms of ciprofloxacin resistance in Pseudomonas aeruginosa: New approaches to an old problem. Journal of Medical Microbiology, 68(1), 1–10. https://doi.org/10.1099/jmm.0.000873
Sanders, C. C. (1988). Ciprofloxacin: In Vitro activity, mechanism of action, and resistance. Clinical Infectious Diseases, 10(3), 516–527. https://doi.org/10.1093/clinids/10.3.516
Schacht, P., Arcieri, G., & Hullmann, R. (1989). Safety of oral ciprofloxacin. The American Journal of Medicine, 87(5), S98–S102. https://doi.org/10.1016/0002-9343(89)90033-8
Settimo, L., Bellman, K., & Knegtel, R. M. A. (2014). Comparison of the accuracy of experimental and predicted pKa values of basic and acidic compounds. Pharmaceutical Research, 31(4), 1082–1095. https://doi.org/10.1007/s11095-013-1232-z
Shazly, G. A. (2017). Ciprofloxacin controlled-solid lipid nanoparticles: Characterization, in vitro release, and antibacterial activity assessment. BioMed Research International, 2017, 1–9. https://doi.org/10.1155/2017/2120734
Shi, A., Li, D., Liu, H., Adhikari, B., & Wang, Q. (2016). Effect of drying and loading methods on the release behavior of ciprofloxacin from starch nanoparticles. International Journal of Biological Macromolecules, 87, 55–61. https://doi.org/10.1016/j.ijbiomac.2016.02.038
Singh, B., & Kumar, A. (2018). Network formation of Moringa oleifera gum by radiation induced crosslinking: Evaluation of drug delivery, network parameters and biomedical properties. International Journal of Biological Macromolecules, 108, 477–488. https://doi.org/10.1016/j.ijbiomac.2017.12.041
Singh, B., Varshney, L., & Sharma, V. (2014). Design of sterile mucoadhesive hydrogels for use in drug delivery: Effect of radiation on network structure. Colloids and Surfaces b: Biointerfaces, 121, 230–237. https://doi.org/10.1016/j.colsurfb.2014.06.020
Singh, B., Kanwar, J. S., & Kumari, P. (2018). Modification of dietary fiber psyllium with poly(vinyl pyrrolidone) through network formation for use in slow drug delivery application. Polymer Science—Series B, 60(3), 331–348. https://doi.org/10.1134/S156009041803017X
Singh, P., Srivastava, S., & Singh, S. K. (2019). Nanosilica: recent progress in synthesis, functionalization, biocompatibility, and biomedical applications. ACS Biomaterials Science and Engineering, 5(10), 4882–4898. https://doi.org/10.1021/acsbiomaterials.9b00464
Singh, B., Dhiman, A., Rajneesh, & Kumar, A. (2016). Slow release of ciprofloxacin from β- cyclodextrin containing drug delivery system through network formation and supramolecular interactions. International Journal of Biological Macromolecules, 92, 390–400. https://doi.org/10.1016/j.ijbiomac.2016.07.060
Skwira, A., Szewczyk, A., & Prokopowicz, M. (2019a). The Effect of polydimethylsiloxane-ethylcellulose coating blends on the surface characterization and drug release of ciprofloxacin-loaded mesoporous silica. Polymers, 11(9), 1450. https://doi.org/10.3390/polym11091450
Skwira, A., Szewczyk, A., Konopacka, A., Górska, M., Majda, D., Sądej, R., & Prokopowicz, M. (2019b). Silica-polymer composites as the novel antibiotic delivery systems for bone tissue infection. Pharmaceutics, 12(1), 28. https://doi.org/10.3390/pharmaceutics12010028
Sobhani, Z., Mohammadi Samani, S., Montaseri, H., & Khezri, E. (2017). Nanoparticles of Chitosan loaded ciprofloxacin: fabrication and antimicrobial activity. Advanced Pharmaceutical Bulletin, 7(3), 427–432. https://doi.org/10.15171/apb.2017.051
Sohrabnezhad, S. /0258, Poursafar, Z., & Asadollahi, A. (2020). Synthesis of novel core@shell of MgAl layered double hydroxide @ porous magnetic shell (MgAl-LDH@PMN) as carrier for ciprofloxacin drug. Applied Clay Science, 190, 105586. https://doi.org/10.1016/j.clay.2020.105586
Song, J., Kook, M.-S., Kim, B.-H., Jeong, Y.-I., & Oh, K.-J. (2021). Ciprofloxacin-releasing ROS-sensitive nanoparticles composed of poly(Ethylene Glycol)/Poly(D, L-lactide-co-glycolide) for antibacterial treatment. Materials, 14(15), 4125. https://doi.org/10.3390/ma14154125
Sousa, W. R. D. N., Oliveira, A. R., Cruz Filho, J. F., Dantas, T. C. M., Santos, A. G. D., Caldeira, V. P. S., & Luz, G. E. (2018). Ciprofloxacin adsorption on ZnO supported on SBA-15. Water, Air, and Soil Pollution, 229(4), 125. https://doi.org/10.1007/s11270-018-3778-1
Steffensen, S. L., Vestergaard, M. H., Møller, E. H., Groenning, M., Alm, M., Franzyk, H., & Nielsen, H. M. (2016). Soft hydrogels interpenetrating silicone—A polymer network for drug-releasing medical devices. Journal of Biomedical Materials Research Part b: Applied Biomaterials, 104(2), 402–410. https://doi.org/10.1002/JBM.B.33371
Sun, D. D., & Lee, P. I. (2015). Probing the mechanisms of drug release from amorphous solid dispersions in medium-soluble and medium-insoluble carriers. Journal of Controlled Release, 211, 85–93. https://doi.org/10.1016/j.jconrel.2015.06.004
Sun, C.-Y., Qin, C., Wang, X.-L., & Su, Z.-M. (2013). Metal-organic frameworks as potential drug delivery systems. Expert Opinion on Drug Delivery, 10(1), 89–101. https://doi.org/10.1517/17425247.2013.741583
Takács-Novák, K., Józan, M., Hermecz, I., & Szász, G. (1992). Lipophilicity of antibacterial fluoroquinolones. International Journal of Pharmaceutics, 79(1–3), 89–96. https://doi.org/10.1016/0378-5173(92)90099-N
Takagi, T., Ramachandran, C., Bermejo, M., Yamashita, S., Yu, L. X., & Amidon, G. L. (2006). A provisional biopharmaceutical classification of the top 200 oral drug products in the United States, Great Britain, Spain, and Japan. Molecular Pharmaceutics, 3(6), 631–643. https://doi.org/10.1021/mp0600182
Talan, D. A., Naber, K. G., Palou, J., & Elkharrat, D. (2004). Extended-release ciprofloxacin (Cipro XR) for treatment of urinary tract infections. International Journal of Antimicrobial Agents, 23(SUPPL. 1), 54–66. https://doi.org/10.1016/j.ijantimicag.2003.12.005
Terp, D. K., & Rybak, M. J. (1987). Ciprofloxacin. Drug Intelligence and Clinical Pharmacy, 21(7–8), 568–574. https://doi.org/10.1177/1060028087021007-801
Thai, T., Salisbury, B. H., & Zito, P. M. (2021). Ciprofloxacin. StatPearls. https://www.ncbi.nlm.nih.gov/books/NBK535454/
Thomson, C. J. (1999). The global epidemiology of resistance to ciprofloxacin and the changing nature of antibiotic resistance: A 10 year perspective. Journal of Antimicrobial Chemotherapy, 43(suppl_1), 31–40. https://doi.org/10.1093/jac/43.suppl_1.31
Wechsler, M. E., Stephenson, R. E., Murphy, A. C., Oldenkamp, H. F., Singh, A., & Peppas, N. A. (2019). Engineered microscale hydrogels for drug delivery, cell therapy, and sequencing. Biomedical Microdevices, 21(31), 1–15. https://doi.org/10.1007/S10544-019-0358-0
World Health Organization. (2021). World Health Organization Model List of Essential Medicines—22nd List.
Yang, K., Sun, Q., Xue, F., & Lin, D. (2011). Adsorption of volatile organic compounds by metal–organic frameworks MIL-101: Influence of molecular size and shape. Journal of Hazardous Materials, 195, 124–131. https://doi.org/10.1016/j.jhazmat.2011.08.020
Yun, Y. H., Lee, B. K., & Park, K. (2015). Controlled drug delivery: Historical perspective for the next generation. Journal of Controlled Release, 219, 2–7. https://doi.org/10.1016/j.jconrel.2015.10.005
Zhang, G.-F., Liu, X., Zhang, S., Pan, B., & Liu, M.-L. (2018a). Ciprofloxacin derivatives and their antibacterial activities. European Journal of Medicinal Chemistry, 146, 599–612. https://doi.org/10.1016/j.ejmech.2018.01.07
Zhang, Y., Huang, C., & Chang, J. (2018b). Ca-Doped mesoporous SiO2/dental resin composites with enhanced mechanical properties, bioactivity and antibacterial properties. Journal of Materials Chemistry B, 6(3), 477–486. https://doi.org/10.1039/C7TB02864D
Zhang, Y., Chang, M., Bao, F., Xing, M., Wang, E., Xu, Q., Huan, Z., Guo, F., & Chang, J. (2019). Multifunctional Zn doped hollow mesoporous silica/polycaprolactone electrospun membranes with enhanced hair follicle regeneration and antibacterial activity for wound healing. Nanoscale, 11(13), 6315–6333. https://doi.org/10.1039/C8NR09818B
Acknowledgements
The authors are grateful for the financial support of the FEDER/Junta de Andalucía (Project P18-RT-4193), the FEDER 2014‐2020 Operative Program, and the Consejería de Economía y Conocimiento of the Junta de Andalucía (Project FEDER-UJA-1380629).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2024 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this chapter
Cite this chapter
García, G.M., Ramos, V.C., García-Reyes, C.B., Casas, R.N., Polo, M.S., Ramón, M.V.L. (2024). Nanomaterials in Biomedical Applications: Specific Case of the Transport and Controlled Release of Ciprofloxacin. In: Núñez-Delgado, A. (eds) Planet Earth: Scientific Proposals to Solve Urgent Issues. Springer, Cham. https://doi.org/10.1007/978-3-031-53208-5_6
Download citation
DOI: https://doi.org/10.1007/978-3-031-53208-5_6
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-53207-8
Online ISBN: 978-3-031-53208-5
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)