Abstract
The textile industry plays an important role in meeting human clothing needs and driving economic growth. However, it also has adverse environmental impacts. This chapter emphasizes the importance of circular economy (CE) principles in the textile industry and the need for performance assessment to measure their effectiveness. A review of the literature identifies a gap in assessing CE performance in the textile industry. To address this issue, the purpose of this chapter is to suggest a framework that can be utilized to assess the performance of textile companies. For this purpose, the criteria set has been reviewed to determine the indicators affecting the performance of a company operating in the textile industry. Then, the fuzzy DEMATEL technique was chosen to identify the cause-and-effect connections among the criteria. Finally, the weightings of the criteria were found using the fuzzy Best-Worst method (BWM) to indicate the roadmap for performance assessment. The findings contribute to understanding CE performance in the textile industry and provide insights for practitioners and policymakers to assess and improve CE implementation. This research can also serve as a reference for future studies in other industries aiming to bridge the literature gap and advance CE practices in the textile industry through effective performance assessment.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Ada, E., Sagnak, M., Mangla, S. K., & Kazancoglu, Y. (2021). A circular business cluster model for sustainable operations management. International Journal of Logistics Research and Applications, 1–19. https://doi.org/10.1080/13675567.2021.2008335
Ada, E., Sagnak, M., Uzel, R. A., & Balcioglu, I. (2022). Analysis of barriers to circularity for agricultural cooperatives in the digitalization era. International Journal of Productivity and Performance Management, 71(3), 932–951. https://doi.org/10.1108/IJPPM-12-2020-0689
Alao, M. A., Ayodele, T. R., Ogunjuyigbe, A. S. O., & Popoola, O. M. (2020). Multi-criteria decision based waste to energy technology selection using entropy-weighted TOPSIS technique: The case study of Lagos, Nigeria. Energy, 201, 117675. https://doi.org/10.1016/j.energy.2020.117675
Ali, A., & Haseeb, M. (2019). Radio frequency identification (RFID) technology as a strategic tool towards higher performance of supply chain operations in textile and apparel industry of Malaysia. Uncertain Supply Chain Management, 7(2), 215–226. https://doi.org/10.5267/j.uscm.2018.10.004
Alkaya, E., & Demirer, G. N. (2014). Sustainable textile production: A case study from a woven fabric manufacturing mill in Turkey. Journal of Cleaner Production, 65, 595–603. https://doi.org/10.1016/j.jclepro.2013.07.008
Amini, M., & Bienstock, C. C. (2014). Corporate sustainability: An integrative definition and framework to evaluate corporate practice and guide academic research. Journal of Cleaner Production, 76, 12–19. https://doi.org/10.1016/j.jclepro.2014.02.016
Angelis-Dimakis, A., Alexandratou, A., & Balzarini, A. (2016). Value chain upgrading in a textile dyeing industry. Journal of Cleaner Production, 138, 237–247. https://doi.org/10.1016/j.jclepro.2016.02.137
Ballie, J., & Woods, M. (2015). Circular by Design: A model for engaging fashion/textile SME’s with strategies for designed reuse. In Unmaking Waste 2015 conference proceedings (pp. 488–522). Zero Waste SA Research Centre for Sustainable Design and Behaviour.
Basso, A., Casarin, F., & Funari, S. (2018). How well is the museum performing? A joint use of DEA and BSC to measure the performance of museums. Omega, 81, 67–84. https://doi.org/10.1016/j.omega.2017.09.010
Bentes, A. V., Carneiro, J., da Silva, J. F., & Kimura, H. (2012). Multidimensional assessment of organizational performance: Integrating BSC and AHP. Journal of Business Research, 65(12), 1790–1799. https://doi.org/10.1016/j.jbusres.2011.10.039
Berberoglu, Y., Kazancoglu, Y., & Sagnak, M. (2023). Circularity assessment of logistics activities for green business performance management. Business Strategy and the Environment, 32(7), 4734–4749. https://doi.org/10.1002/bse.3390
Biganzoli, L., Rigamonti, L., & Grosso, M. (2018). Intermediate bulk containers re-use in the circular economy: An LCA evaluation. Procedia CIRP, 69, 827–832. https://doi.org/10.1016/j.procir.2017.11.010
Bititci, U., Garengo, P., Dörfler, V., & Nudurupati, S. (2012). Performance measurement: Challenges for tomorrow. International Journal of Management Reviews, 14(3), 305–327. https://doi.org/10.1111/j.1468-2370.2011.00318.x
Boiten, V. J., Han, S. L.-C., & Tyler, D. (2017). Circular economy stakeholder perspectives: Textile collection strategies to support material circularity. RESYNTEX.
Brennan, G., Tennant, M., & Blomsma, F. (2015). Business and production solutions: Closing loops and the circular economy. In Sustainability: Key issues (pp. 219–239). Routledge. https://doi.org/10.4324/9780203109496-11
Briga-Sá, A., Nascimento, D., Teixeira, N., Pinto, J., Caldeira, F., Varum, H., & Paiva, A. (2013). Textile waste as an alternative thermal insulation building material solution. Construction and Building Materials, 38, 155–160. https://doi.org/10.1016/j.conbuildmat.2012.08.037
Chavan, R. B. (2014). Environmental sustainability through textile recycling. Journal of Textile Science & Engineering, S2(01), 007. https://doi.org/10.4172/2165-8064.s2-007
Chen, Z. S., Martínez, L., Chang, J. P., Wang, X. J., Xionge, S. H., & Chin, K. S. (2019). Sustainable building material selection: A QFD- and ELECTRE III-embedded hybrid MCGDM approach with consensus building. Engineering Applications of Artificial Intelligence, 85, 783–807. https://doi.org/10.1016/j.engappai.2019.08.006
Chico, D., Aldaya, M. M., & Garrido, A. (2013). A water footprint assessment of a pair of jeans: The influence of agricultural policies on the sustainability of consumer products. Journal of Cleaner Production, 57, 238–248. https://doi.org/10.1016/j.jclepro.2013.06.001
Cuc, S., & Tripa, S. (2018). Redesign and upcycling – A solution for the competitiveness of small and medium-sized enterprises in the clothing industry. Industria Textila, 69(1), 31–36.
Cumming, V., Cunnington, C. W., & Cunnington, P. E. (2010). The dictionary of fashion history. Berg.
de Brito, M. P., Carbone, V., & Blanquart, C. M. (2008). Towards a sustainable fashion retail supply chain in Europe: Organisation and performance. International Journal of Production Economics, 114(2), 534–553. https://doi.org/10.1016/j.ijpe.2007.06.012
Desore, A., & Narula, S. A. (2018). An overview on corporate response towards sustainability issues in textile industry. Environment, Development and Sustainability, 20(4), 1439–1459. https://doi.org/10.1007/s10668-017-9949-1
Di Maio, F., & Rem, P. C. (2015). A robust indicator for promoting circular economy through recycling. Journal of Environmental Protection, 6(10), 1095–1104. https://doi.org/10.4236/jep.2015.610096
Domina, T., & Koch, K. (1997). The textile was lifecycle. Clothing and Textiles Research Journal, 15(2), 96–102. https://doi.org/10.1177/0887302X9701500204
dos Santos, A. B., Cervantes, F. J., & van Lier, J. B. (2007). Review paper on current technologies for decolourisation of textile wastewaters: Perspectives for anaerobic biotechnology. Bioresource Technology, 98(12), 2369–2385. https://doi.org/10.1016/j.biortech.2006.11.013
Eastwood, M. D., & Haapala, K. R. (2015). A unit process model based methodology to assist product sustainability assessment during design for manufacturing. Journal of Cleaner Production, 108, 54–64. https://doi.org/10.1016/j.jclepro.2015.08.105
Ellen MacArthur Foundation. (2013). Towards the circular economy. Ellen MacArthur Foundation.
Ellen MacArthur Foundation. (2017). A new textiles economy: Redesigning fashion’s future. Ellen MacArthur Foundation.
Expósito, A., & Velasco, F. (2018). Municipal solid-waste recycling market and the European 2020 Horizon Strategy: A regional efficiency analysis in Spain. Journal of Cleaner Production, 172(2018), 938–948. https://doi.org/10.1016/j.jclepro.2017.10.221
Favi, C., Germani, M., Luzi, A., Mandolini, M., & Marconi, M. (2017). A design for EoL approach and metrics to favour closed-loop scenarios for products. International Journal of Sustainable Engineering, 10(3), 136–146. https://doi.org/10.1080/19397038.2016.1270369
Francis, D. (2014, June 27). Mending the capitalist model. Financial Post.
Franco, M. A. (2017). Circular economy at the micro level: A dynamic view of incumbents’ struggles and challenges in the textile industry. Journal of Cleaner Production, 168, 833–845. https://doi.org/10.1016/j.jclepro.2017.09.056
Franklin-Johnson, E., Figge, F., & Canning, L. (2016). Resource duration as a managerial indicator for circular economy performance. Journal of Cleaner Production, 133, 589–598. https://doi.org/10.1016/j.jclepro.2016.05.023
Fregonara, E., Giordano, R., Ferrando, D. G., & Pattono, S. (2017). Economic-environmental indicators to support investment decisions: A focus on the buildings’ end-of-life stage. Buildings, 7(3), 65. https://doi.org/10.3390/buildings7030065
Fresner, J. (1998). Starting continuous improvement with a cleaner production assessment in an Austrian textile mill. Journal of Cleaner Production, 6(2), 85–91. https://doi.org/10.1016/s0959-6526(97)00049-8
Gardas, B. B., Raut, R. D., & Narkhede, B. (2018). Modelling the challenges to sustainability in the textile and apparel (T&A) sector: A Delphi-DEMATEL approach. Sustainable Production and Consumption, 15, 96–108. https://doi.org/10.1016/j.spc.2018.05.001
Gbededo, M. A., Liyanage, K., & Garza-Reyes, J. A. (2018). Towards a life cycle sustainability analysis: A systematic review of approaches to sustainable manufacturing. Journal of Cleaner Production, 184, 1002–1015. https://doi.org/10.1016/j.jclepro.2018.02.310
Geissdoerfer, M., Savaget, P., Bocken, N. M. P., & Hultink, E. J. (2017). The circular economy – A new sustainability paradigm? Journal of Cleaner Production, 143, 757–768. https://doi.org/10.1016/j.jclepro.2016.12.048
Ghisellini, P., Cialani, C., & Ulgiati, S. (2016). A review on circular economy: The expected transition to a balanced interplay of environmental and economic systems. Journal of Cleaner Production, 114, 11–32. https://doi.org/10.1016/j.jclepro.2015.09.007
Grand View Research. (2020). Textile market size, share & trends analysis report by raw material (wool, chemical, silk, cotton), by product (natural fibers, polyester, nylon), by application, by region, and segment forecasts, 2020–2027, 215.
Gregory, J. M. (2006). A history of the sewing machine to 1880. Transactions of the Newcomen Society, 76, 127–144. https://doi.org/10.1179/175035206X105249
Grimaud, G., Perry, N., & Laratte, B. (2017). Decision support methodology for designing sustainable recycling process based on ETV standards. Procedia Manufacturing, 7, 72–78. https://doi.org/10.1016/j.promfg.2016.12.020
Gupta, H. (2018). Assessing organizations performance on the basis of GHRM practices using BWM and Fuzzy TOPSIS. Journal of Environmental Management, 226, 201–216. https://doi.org/10.1016/j.jenvman.2018.08.005
Hadzic, A., Voca, N., & Golubic, S. (2018). Life-cycle assessment of solid-waste management in city of Zagreb, Croatia. Journal of Material Cycles and Waste Management, 20(2), 1286–1298. https://doi.org/10.1007/s10163-017-0693-2
Han, H., & Trimi, S. (2018). A fuzzy TOPSIS method for performance evaluation of reverse logistics in social commerce platforms. Expert Systems with Applications, 103, 133–145. https://doi.org/10.1016/j.eswa.2018.03.003
Hansen, E. G., & Schaltegger, S. (2013). 100 per cent organic? A sustainable entrepreneurship perspective on the diffusion of organic clothing. Corporate Governance (Bingley), 13(5), 583–598. https://doi.org/10.1108/CG-06-2013-0074
Hasanbeigi, A., & Price, L. (2015). A technical review of emerging technologies for energy and water efficiency and pollution reduction in the textile industry. Journal of Cleaner Production, 95, 30–44. https://doi.org/10.1016/j.jclepro.2015.02.079
Haupt, M., Vadenbo, C., & Hellweg, S. (2017). Do we have the right performance indicators for the circular economy?: Insight into the Swiss waste management system. Journal of Industrial Ecology, 21(3), 615–627. https://doi.org/10.1111/jiec.12506
Hawley, J. M. (2006). Digging for diamonds: A conceptual framework for understanding reclaimed textile products. Clothing and Textiles Research Journal, 24(3), 262–275. https://doi.org/10.1177/0887302X06294626
Hayat, N., Hussain, A., & Lohano, H. D. (2020). Eco-labeling and sustainability: A case of textile industry in Pakistan. Journal of Cleaner Production, 252, 119807. https://doi.org/10.1016/j.jclepro.2019.119807
Huysman, S., De Schaepmeester, J., Ragaert, K., Dewulf, J., & De Meester, S. (2017). Performance indicators for a circular economy: A case study on post-industrial plastic waste. Resources, Conservation and Recycling, 120, 46–54. https://doi.org/10.1016/j.resconrec.2017.01.013
Iakovou, E., Moussiopoulos, N., Xanthopoulos, A., Achillas, C., Michailidis, N., Chatzipanagioti, M., Koroneos, C., Bouzakis, K. D., & Kikis, V. (2009). A methodological framework for end-of-life management of electronic products. Resources, Conservation and Recycling, 53(6), 329–339. https://doi.org/10.1016/j.resconrec.2009.02.001
Ishizaka, A., & Resce, G. (2021). Best-Worst PROMETHEE method for evaluating school performance in the OECD’s PISA project. Socio-Economic Planning Sciences, 73, 100799. https://doi.org/10.1016/j.seps.2020.100799
Issa, I. I., Pigosso, D. C. A., McAloone, T. C., & Rozenfeld, H. (2015). Leading product-related environmental performance indicators: A selection guide and database. Journal of Cleaner Production, 108(PartA), 321–330. https://doi.org/10.1016/j.jclepro.2015.06.088
Jacometti, V. (2019). Circular economy and waste in the fashion industry. Laws, 8(4), 27. https://doi.org/10.3390/laws8040027
Jajimoggala, S. S., Rao, V., & Beela, S. (2010). A hybrid multiple criteria decision making technique for prioritizing equipments. International Journal of Strategic Decision Sciences, 1, 56–75. https://doi.org/10.4018/jsds.2010100104
Jamali-Zghal, N., Lacarrière, B., & Le Corre, O. (2015). Metallurgical recycling processes: Sustainability ratios and environmental performance assessment. Resources, Conservation and Recycling, 97, 66–75. https://doi.org/10.1016/j.resconrec.2015.02.010
Jia, F., Yin, S., Chen, L., & Chen, X. (2020). The circular economy in the textile and apparel industry: A systematic literature review. Journal of Cleaner Production, 259, 120728. https://doi.org/10.1016/j.jclepro.2020.120728
Joa, B., Hottenroth, H., Jungmichel, N., & Schmidt, M. (2014). Introduction of a feasible performance indicator for corporate water accounting – A case study on the cotton textile chain. Journal of Cleaner Production, 82, 143–153. https://doi.org/10.1016/j.jclepro.2014.06.075
Karthee, K., Vishal Sankar, S., & Raj, S. Y. (2018). Improvement of overall performance of micro/small scale industries (MSSI) using multi-criteria decision making (MCDM). IOP Conference Series: Materials Science and Engineering, 402(1), 012119. https://doi.org/10.1088/1757-899X/402/1/012119
Kazancoglu, Y., Kazancoglu, I., & Sagnak, M. (2018a). A new holistic conceptual framework for green supply chain management performance assessment based on circular economy. Journal of Cleaner Production, 195, 1282–1299. https://doi.org/10.1016/j.jclepro.2018.06.015
Kazancoglu, Y., Kazancoglu, I., & Sagnak, M. (2018b). Fuzzy DEMATEL-based green supply chain management performance: Application in cement industry. Industrial Management and Data Systems, 118(2), 412–431. https://doi.org/10.1108/IMDS-03-2017-0121
Keane, J., & te Velde, D. W. (2008, May). The role of textile and clothing industries in growth and development strategies. ODI Working Paper, 1–71.
Keeble, B. R. (1988). The Brundtland report: “Our common future”. Medicine and War, 4(1), 17–25. https://doi.org/10.1080/07488008808408783
Kilic, H. S., Zaim, S., & Delen, D. (2015). Selecting “the best” ERP system for SMEs using a combination of ANP and PROMETHEE methods. Expert Systems with Applications, 42(5), 2343–2352. https://doi.org/10.1016/j.eswa.2014.10.034
Kim, A. J., & Ko, E. (2010). Impacts of luxury fashion brand’s social media marketing on customer relationship and purchase intention. Journal of Global Fashion Marketing, 1(3), 164–171. https://doi.org/10.1080/20932685.2010.10593068
King, A. M., Burgess, S. C., Ijomah, W., & Mcmahon, C. A. (2006). Remanufacture or recycle? Sustainable Development, 14, 257–267.
Köhler, A. R. (2013). Challenges for eco-design of emerging technologies: The case of electronic textiles. Materials and Design, 51, 51–60. https://doi.org/10.1016/j.matdes.2013.04.012
Kuik, S. S., Nagalingam, S. V., & Amer, Y. (2012). A framework of product recovery to improve sustainability in manufacturing. Advances in Mechanical Engineering, 2(1), 41–47.
Kvavadze, E., Bar-Yosef, O., Belfer-Cohen, A., Boaretto, E., Jakeli, N., Matskevich, Z., & Meshveliani, T. (2009). 30,000-year-old wild flax fibers. Science, 325(5946), 1359. https://doi.org/10.1126/science.1175404
Laso, J., Margallo, M., Celaya, J., Fullana, P., Bala, A., Gazulla, C., Irabien, A., & Aldaco, R. (2016). Waste management under a life cycle approach as a tool for a circular economy in the canned anchovy industry. Waste Management and Research, 34(8), 724–733. https://doi.org/10.1177/0734242X16652957
Laso, J., García-Herrero, I., Margallo, M., Vázquez-Rowe, I., Fullana, P., Bala, A., Gazulla, C., Irabien, Á., & Aldaco, R. (2018). Finding an economic and environmental balance in value chains based on circular economy thinking: An eco-efficiency methodology applied to the fish canning industry. Resources, Conservation and Recycling, 133, 428–437. https://doi.org/10.1016/j.resconrec.2018.02.004
Leal Filho, W., Ellams, D., Han, S., Tyler, D., Boiten, V. J., Paco, A., Moora, H., & Balogun, A. L. (2019). A review of the socio-economic advantages of textile recycling. Journal of Cleaner Production, 218, 10–20. https://doi.org/10.1016/j.jclepro.2019.01.210
Li, N., & Zhao, H. (2016). Performance evaluation of eco-industrial thermal power plants by using fuzzy GRA-VIKOR and combination weighting techniques. Journal of Cleaner Production, 135(2016), 169–183. https://doi.org/10.1016/j.jclepro.2016.06.113
Li, Y., Zhao, X., Shi, D., & Li, X. (2014). Governance of sustainable supply chains in the fast fashion industry. European Management Journal, 32(5), 823–836. https://doi.org/10.1016/j.emj.2014.03.001
Liu, G., Zheng, S., Xu, P., & Zhuang, T. (2018). An ANP-SWOT approach for ESCOs industry strategies in Chinese building sectors. Renewable and Sustainable Energy Reviews, 93, 90–99. https://doi.org/10.1016/j.rser.2018.03.090
Maia, L. C., Alves, A. C., & Leão, C. P. (2013). Sustainable work environment with lean production in textile and clothing industry. International Journal of Industrial Engineering and Management, 4(3), 183–190.
Mardani, A., Zavadskas, E. K., Streimikiene, D., Jusoh, A., & Khoshnoudi, M. (2017). A comprehensive review of data envelopment analysis (DEA) approach in energy efficiency. Renewable and Sustainable Energy Reviews, 70, 1298–1322. https://doi.org/10.1016/j.rser.2016.12.030
Martin, M., Wetterlund, E., Hackl, R., Holmgren, K. M., & Peck, P. (2020). Assessing the aggregated environmental benefits from by-product and utility synergies in the Swedish biofuel industry. Biofuels, 11(6), 683–698. https://doi.org/10.1080/17597269.2017.1387752
Maslow, A. H. (1943). A theory of human motivation. Psychological Review, 50(4), 370–396. https://doi.org/10.1037/h0054346
McCollough, J. (2012). Determinants of a throwaway society – A sustainable consumption issue. Journal of Socio-Economics, 41(1), 110–117. https://doi.org/10.1016/j.socec.2011.10.014
Meksi, N., & Moussa, A. (2017). A review of progress in the ecological application of ionic liquids in textile processes. Journal of Cleaner Production, 161, 105–126. https://doi.org/10.1016/j.jclepro.2017.05.066
Moktadir, M. A., Rahman, T., Rahman, M. H., Ali, S. M., & Paul, S. K. (2018). Drivers to sustainable manufacturing practices and circular economy: A perspective of leather industries in Bangladesh. Journal of Cleaner Production, 174, 1366–1380. https://doi.org/10.1016/j.jclepro.2017.11.063
Moorhouse, D., & Moorhouse, D. (2017). Sustainable design: Circular economy in fashion and textiles. The Design Journal, 20(sup1), S1948–S1959. https://doi.org/10.1080/14606925.2017.1352713
Motevali Haghighi, S., Torabi, S. A., & Ghasemi, R. (2016). An integrated approach for performance evaluation in sustainable supply chain networks (with a case study). Journal of Cleaner Production, 137, 579–597. https://doi.org/10.1016/j.jclepro.2016.07.119
Ng, K. S., & Martinez Hernandez, E. (2016). A systematic framework for energetic, environmental and economic (3E) assessment and design of polygeneration systems. Chemical Engineering Research and Design, 106, 1–25. https://doi.org/10.1016/j.cherd.2015.11.017
Noweir, M. H., & Jamil, A. T. M. (2003). Noise pollution in textile, printing and publishing industries in Saudi Arabia. Environmental Monitoring and Assessment, 83(1), 103–111. https://doi.org/10.1023/A:1022418805827
Ofluoglu, P., & Atilgan, T. (2016). Using Five-R analysis for sustainable supply chain management in clothing. In Conference paper, 759–766.
Oliveira, F. R. d., França, S. L. B., & Rangel, L. A. D. (2018). Challenges and opportunities in a circular economy for a local productive arrangement of furniture in Brazil. Resources, Conservation and Recycling, 135, 202–209. https://doi.org/10.1016/j.resconrec.2017.10.031
Olugu, E. U., & Wong, K. Y. (2012). An expert fuzzy rule-based system for closed-loop supply chain performance assessment in the automotive industry. Expert Systems with Applications, 39(1), 375–384. https://doi.org/10.1016/j.eswa.2011.07.026
Ozturk, E., & Cinperi, N. C. (2018). Water efficiency and wastewater reduction in an integrated woolen textile mill. Journal of Cleaner Production, 201, 686–696. https://doi.org/10.1016/j.jclepro.2018.08.021
Pagotto, M., & Halog, A. (2016). Towards a circular economy in Australian Agri-food Industry: An application of input-output oriented approaches for analyzing resource efficiency and competitiveness potential. Journal of Industrial Ecology, 20(5), 1176–1186. https://doi.org/10.1111/jiec.12373
Pan, H., Zhang, X., Wang, Y., Qi, Y., Wu, J., Lin, L., Peng, H., Qi, H., Yu, X., & Zhang, Y. (2016). Emergy evaluation of an industrial park in Sichuan Province, China: A modified emergy approach and its application. Journal of Cleaner Production, 135, 105–118. https://doi.org/10.1016/j.jclepro.2016.06.102
Patel, D., & Pandey, R. (2015). Textile recycling practices prevailing in Kanpur city. International Journal of Community Science and Technology, 1, 1–10.
Pauliuk, S. (2018). Critical appraisal of the circular economy standard BS 8001:2017 and a dashboard of quantitative system indicators for its implementation in organizations. Resources, Conservation and Recycling, 129, 81–92. https://doi.org/10.1016/j.resconrec.2017.10.019
Pawęta, E., & Mikołajczyk, B. (2016). Areas for improving the innovation performance of the textile industry in Russia. Fibres & Textiles in Eastern Europe, 24(1), 10–14. https://doi.org/10.5604/12303666.1172081
Petit, G., Sablayrolles, C., & Yannou-Le Bris, G. (2018). Combining eco-social and environmental indicators to assess the sustainability performance of a food value chain: A case study. Journal of Cleaner Production, 191, 135–143. https://doi.org/10.1016/j.jclepro.2018.04.156
Pinheiro, E., de Francisco, A. C., Piekarski, C. M., & de Souza, J. T. (2019). How to identify opportunities for improvement in the use of reverse logistics in clothing industries? A case study in a Brazilian cluster. Journal of Cleaner Production, 210, 612–619. https://doi.org/10.1016/j.jclepro.2018.11.024
Potting, J., Hekkert, M., Worrell, E., & Hanemaaijer, A. (2017). Circular economy: measuring innovation in the product chain – Policy report. PBL Netherlands Environmental Assessment Agency, 2544, 42.
Raj, D., Ma, Y. J., Gam, H. J., & Banning, J. (2017). Implementation of lean production and environmental sustainability in the Indian apparel manufacturing industry: A way to reach the triple bottom line. International Journal of Fashion Design, Technology and Education, 10(3), 254–264. https://doi.org/10.1080/17543266.2017.1280091
Rakib, M. I., Saidur, R., Mohamad, E. N., & Afifi, A. M. (2017). Waste-heat utilization – The sustainable technologies to minimize energy consumption in Bangladesh textile sector. Journal of Cleaner Production, 142, 1867–1876. https://doi.org/10.1016/j.jclepro.2016.11.098
Remy, N., Speelman, E., & Swartz, S. (2016). Style that’s sustainable: A new fast-fashion formula. McKinsey & Company.
Rezaei, J. (2015). Best-Worst multi-criteria decision-making method. Omega, 53, 49–57. https://doi.org/10.1016/j.omega.2014.11.009
Sagnak, M., & Kazancoglu, Y. (2016). Integration of green lean approach with six sigma: An application for flue gas emissions. Journal of Cleaner Production, 127, 112–118. https://doi.org/10.1016/j.jclepro.2016.04.016
Sagnak, M., Berberoglu, Y., Memis, İ., & Yazgan, O. (2021). Sustainable collection center location selection in emerging economy for electronic waste with fuzzy Best-Worst and fuzzy TOPSIS. Waste Management, 127, 37–47. https://doi.org/10.1016/j.wasman.2021.03.054
Sahinkaya, E., Tuncman, S., Koc, I., Guner, A. R., Ciftci, S., Aygun, A., & Sengul, S. (2019). Performance of a pilot-scale reverse osmosis process for water recovery from biologically-treated textile wastewater. Journal of Environmental Management, 249, 109382. https://doi.org/10.1016/j.jenvman.2019.109382
Sakai, S.-i., Yoshida, H., Hirai, Y., Asari, M., Takigami, H., Takahashi, S., Tomoda, K., Peeler, M. V., Wejchert, J., Schmid-Unterseh, T., Douvan, A. R., Hathaway, R., Hylander, L. D., Fischer, C., Oh, G. J., Jinhui, L., & Chi, N. K. (2011). International comparative study of 3R and waste management policy developments. Journal of Material Cycles and Waste Management, 13(2), 86–102. https://doi.org/10.1007/s10163-011-0009-x
Sakthivel, G., Ilangkumaran, M., & Gaikwad, A. (2015). A hybrid multi-criteria decision modeling approach for the best biodiesel blend selection based on ANP-TOPSIS analysis. Ain Shams Engineering Journal, 6(1), 239–256. https://doi.org/10.1016/j.asej.2014.08.003
Sandin, G., & Peters, G. M. (2018). Environmental impact of textile reuse and recycling – A review. Journal of Cleaner Production, 184, 353–365. https://doi.org/10.1016/j.jclepro.2018.02.266
Santini, A., Herrmann, C., Passarini, F., Vassura, I., Luger, T., & Morselli, L. (2010). Assessment of Ecodesign potential in reaching new recycling targets. Resources, Conservation and Recycling, 54(12), 1128–1134. https://doi.org/10.1016/j.resconrec.2010.03.006
Sassanelli, C., Rosa, P., Rocca, R., & Terzi, S. (2019). Circular economy performance assessment methods: A systematic literature review. Journal of Cleaner Production, 229, 440–453. https://doi.org/10.1016/j.jclepro.2019.05.019
Sawaf, M. B. A., & Karaca, F. (2018). Different stakeholders’ opinions toward the sustainability of common textile wastewater treatment technologies in Turkey: A case study Istanbul province. Sustainable Cities and Society, 42, 194–205. https://doi.org/10.1016/j.scs.2018.06.027
Seuring, S., & Müller, M. (2008). Core issues in sustainable supply chain management – A Delphi study. Business Strategy and the Environment, 17(8), 455–466. https://doi.org/10.1002/bse.607
Shen, B., & Li, Q. (2015). Impacts of returning unsold products in retail outsourcing fashion supply chain: A sustainability analysis. Sustainability (Switzerland), 7(2), 1172–1185. https://doi.org/10.3390/su7021172
Shen, L., Olfat, L., Govindan, K., Khodaverdi, R., & Diabat, A. (2013). A fuzzy multi criteria approach for evaluating green supplier’s performance in green supply chain with linguistic preferences. Resources, Conservation and Recycling, 74, 170–179. https://doi.org/10.1016/j.resconrec.2012.09.006
Sihvonen, S., & Ritola, T. (2015). Conceptualizing ReX for aggregating end-of-life strategies in product development. Procedia CIRP, 29, 639–644. https://doi.org/10.1016/j.procir.2015.01.026
Suganthi, L. (2018). Multi expert and multi criteria evaluation of sectoral investments for sustainable development: An integrated fuzzy AHP, VIKOR/DEA methodology. Sustainable Cities and Society, 43, 144–156. https://doi.org/10.1016/j.scs.2018.08.022
Tayaksi, C., Sagnak, M., & Kazancoglu, Y. (2020). A new holistic conceptual framework for leanness assessment. International Journal of Mathematical, Engineering and Management Sciences, 5(4), 567–590. https://doi.org/10.33889/IJMEMS.2020.5.4.047
Torbacki, W., & Kijewska, K. (2019). Identifying key performance indicators to be used in logistics 4.0 and industry 4.0 for the needs of sustainable municipal logistics by means of the DEMATEL method. Transportation Research Procedia, 39(2018), 534–543. https://doi.org/10.1016/j.trpro.2019.06.055
Turker, D., & Altuntas, C. (2014). Sustainable supply chain management in the fast fashion industry: An analysis of corporate reports. European Management Journal, 32(5), 837–849. https://doi.org/10.1016/j.emj.2014.02.001
University of Colorado at Boulder. (2002). Excavations in Eastern Europe reveal ancient human lifestyles. ScienceDaily.
Ural, T. (2019). Experimental performance assessment of a new flat-plate solar air collector having textile fabric as absorber using energy and exergy analyses. Energy, 188, 116116. https://doi.org/10.1016/j.energy.2019.116116
van Buren, N., Demmers, M., van der Heijden, R., & Witlox, F. (2016). Towards a circular economy: The role of Dutch logistics industries and governments. Sustainability (Switzerland), 8(7), 1–17. https://doi.org/10.3390/su8070647
Vout, C. (1996). The myth of the toga: Understanding the history of Roman dress. Greece & Rome, 43(2), 204–220.
Wibowo, S., & Grandhi, S. (2017). Performance evaluation of recoverable end-of-life products in the reverse supply chain. In Proceedings – 16th IEEE/ACIS international conference on computer and information science, ICIS 2017 (pp. 215–220). IEEE. https://doi.org/10.1109/ICIS.2017.7959996
Xu, C.-k., Cheng, H., Liao, Z., & Hu, H. (2019). An account of the textile waste policy in China (1991–2017). Journal of Cleaner Production, 234, 1459–1470. https://doi.org/10.1016/j.jclepro.2019.06.283
Yang, Q. Z., Zhou, J., & Xu, K. (2014). A 3R implementation framework to enable circular consumption in community. International Journal of Environmental Science and Development, 5(2), 217–222. https://doi.org/10.7763/ijesd.2014.v5.481
Yong, R. (2007). The circular economy in China. Journal of Material Cycles and Waste Management, 9(2), 121–129. https://doi.org/10.1007/s10163-007-0183-z
Zabaniotou, A., & Andreou, K. (2010). Development of alternative energy sources for GHG emissions reduction in the textile industry by energy recovery from cotton ginning waste. Journal of Cleaner Production, 18(8), 784–790. https://doi.org/10.1016/j.jclepro.2010.01.006
Zadeh, L. A. (1965). Fuzzy sets. Information and Control, 8(3), 338–353. https://doi.org/10.1016/S0019-9958(65)90241-X
Zarbakhshnia, N., Soleimani, H., & Ghaderi, H. (2018). Sustainable third-party reverse logistics provider evaluation and selection using fuzzy SWARA and developed fuzzy COPRAS in the presence of risk criteria. Applied Soft Computing, 65, 307–319. https://doi.org/10.1016/j.asoc.2018.01.023
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2024 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this chapter
Cite this chapter
Sagnak, M., Berberoglu, Y., Kazancoglu, Y. (2024). Sustainable Performance Assessment of Textile and Apparel Industry in a Circular Context. In: Muthu, S.S. (eds) Sustainable Manufacturing Practices in the Textiles and Fashion Sector. Sustainable Textiles: Production, Processing, Manufacturing & Chemistry. Springer, Cham. https://doi.org/10.1007/978-3-031-51362-6_9
Download citation
DOI: https://doi.org/10.1007/978-3-031-51362-6_9
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-51361-9
Online ISBN: 978-3-031-51362-6
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)