Abstract
This work presents an experimental evaluation into the effect of the temperature upon the thermal properties and the mechanical properties of jute fabric/epoxy composite heated at different temperatures. The jute fabric/epoxy was prepared at the ambient temperature and fixed volume fraction of jute (four fabric layers) using infusion method. To examine the effect of the temperature, the composite was heated at different temperatures. The mechanical properties of the jute fabric/epoxy heated at different temperatures were carefully investigated. The results shows that the composites exposed to the high temperature are prone to the lower mechanical properties. At the temperature (80 ℃), the composite shows a high ability to deformation due to the matrix softening which reduces the cohesion between the epoxy and the jute fabric, which is the reason for the decrease of the tensile stress. Moreover, the matrix softening increase with an increase of heating temperature. The lowest tensile stress (reduce by more than 58%) was determined in the case of the composite heated at the temperature 80 ℃. The results in this research confirm the limitation of the composite use in different applications, especially at high temperature.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Ben Smail, Y., El Moumen, A., Imad, F. Lmai, A., Elminor, H.: Mater. Today Proc. (Elsevier BV, 2020), pp. 3827–3833 (2020)
Franco-Urquiza, E.A., Escamilla, Y.R., Llanas, P.I.A.: Polymers (Basel). 13 (2021)
Komuraiah, A., Kumar, N.S., Prasad, B.D.: Mech. Compos. Mater. 50, 359 (2014)
Naveen Reddy, C., Rajeswari, C., Malyadri, T., Sai Hari, S.N.S.: Mater. Today Proc. 45, 3307 (2021)
Mohanty, A.K., Khan, M.A., Hinrichsen, G.: Compos. Sci. Technol. 60, 1115 (2000)
Ben Smail, Y., El Moumen, A., Imad, F. Lmai, A., Elminor, H.: Mater. Today Proc. 30, 860 (2020)
Ben Smail, Y., El Moumen, A., Imad, F. Lmai, A., Ezahri, M.: J. Compos. Mater. 002199832199910 (2021)
Ozkur, S., Leskovšek, M., Golja, B., Demsar, A., Sezgin, H., Yalcin-Enis, I.: Fibers Polym. 22, 3414 (2021)
Bhattacharyya, D., Baheti, V.: Mater. Chem. Phys. 296, 127258 (2023)
Singh, S., Agarwal, C., Panwar, N.L., Upadhyay, V.: J. Nat. Fibers 20, (2023)
Patnaik, P.K., Mishra, S.K., Swain, P.T.R., Sameer, Panda, D.: J. Inst. Eng. Ser. E 103, 65 (2022)
Mennani, M., et al.: Int. J. Biol. Macromol. 221, 149 (2022)
Selvaraj, M., Chapagain, P., Mylsamy, B.: J. Nat. Fibers 20 (2023)
Gupta, M.K.: Proc. Inst. Mech. Eng. Part L J. Mater. Des. Appl. 232, 743 (2018)
Saaidia, A., Bezazi, A., Belbah, A., Bouchelaghem, H., Scarpa, F., Amirouche, S.: Meas. J. Int. Meas. Confed. 111, 284 (2017)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2024 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Ben smail, Y., El moumen, A., Lmai, F., Imad, A. (2024). Effect of the Temperature on the Mechanical Properties of Jute Fabric Reinforced Epoxy Composite. In: Azari, Z., El Had, K., Ait Ali, M.E., El Mahi, A., Chaari, F., Haddar, M. (eds) Advances in Applied Mechanics. JET 2022. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-031-49727-8_6
Download citation
DOI: https://doi.org/10.1007/978-3-031-49727-8_6
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-49726-1
Online ISBN: 978-3-031-49727-8
eBook Packages: EngineeringEngineering (R0)