Abstract
Graphene, a honeycomb-like sheet of carbon just one atom thick, is used as a new reinforcement to make high-performance composites due to its unprecedented physical and chemical properties. Here we focus on the elastic properties of multi-layer graphene to simulate the mechanical properties of their composites. On the basis of the methods of state-based peridynamics and periodic boundary conditions, a unit cell model of graphene was established at the microscopic scale. Considering six pure load cases, the response of the periodic material under the action of macroscopically uniform deformation gradient is obtained. The effect of van der Waals forces and Brenner interatomic potentials with optimized parameters has been taken into account in the analysis of interaction between carbon atoms in graphene. The results obtained from the present numerical solution are in good agreement with the data in the existing literature, indicating that the model can well simulate the elastic properties of graphene, and give a significant reference for the further studies of the properties of graphene-based composites.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Frank, I.W.T.D.M., Van der Zande, A.M., et al.: Mechanical properties of suspended graphene sheets. J. Vacuum Sci. Technol. B Microelectron. Nanometer Struct. 25(6), 2558–2561 (2007)
Burkert, U.A.N.L.: Molecular Mechanics. American Chemical Society, Washington, DC (1982)
Berg, B.A.: Markov Chain Monte Carlo Simulations and Their Statistical Analysis: With Web-Based Fortran Code. World Scientific (2004)
Doucet, A.D.F.N., Gordon, N.: Sequential Monte Carlo Methods in Practice. Springer, New York (2001)
Binder, K.: The Monte Carlo method in condensed matter physics. In: The Monte Carlo Method in Condensed Matter Physics, p. 1 (1995)
Reddy, C.D.R.S., Liew, K.M.: Equilibrium configuration and continuum elastic properties of finite sized graphene. Nanotechnology 17(3), 864–870 (2006)
Silling, S.A.: Reformulation of elasticity theory for discontinuities and long-range forces. J. Mech. Phys. Solids. 48(1), 175–209 (2000)
Brenner, D.W.: Empirical potential for hydrocarbons for use in simulating the chemical vapor deposition of diamond films. Phys. Rev. B 42(15), 9458–9471 (1990)
Brenner, D.W., et al.: A second-generation reactive empirical bond order (REBO) potential energy expression for hydrocarbons. J. Phys. Condensed Matter. 14(4), 783–802 (2002)
Deji Akinwande, C.J.B., Scott Bunch, J., Egberts, P., Felts, J.R., Gao, H., Huang, R., Kim, J.-S., Li, T., Li, Y., Liechti, K.M., Lu, N., Park, H.S., Reed, E.J., Wang, P., Yakobson, B.I., Zhang, T., Zhang, Y.-W., Zhou, Y., Zhu, Y.: A review on mechanics and mechanical properties of 2D materials—graphene and beyond. Extreme Mech. Lett. 13, 42–77 (2017)
Lindsay, L., Broido, D.A.: Optimized Tersoff and Brenner empirical potential parameters for lattice dynamics and phonon thermal transport in carbon nanotubes and graphene. Phys. Rev. B 81(20), 205441 (2010)
He, X.Q., et al.: Modeling of van der Waals force for infinitesimal deformation of multi-walled carbon nanotubes treated as cylindrical shells. Int. J. Solids Struct. 42(23), 6032–6047 (2005)
Jones, J.E.: The determination of molecular fields: from the variation of the viscosity of a gas with temperature. Proc. Royal Soc. 106A, 441 (1924)
Girifalco, L.A., Lad, R.A: Energy of cohesion, compressibility, and the potential energy function of graphite system. J. Chem. Phys. 25, 693–697 (1956)
Girifalco, L.A.: Interaction potential for C60 molecules. J. Phys. Chem. 95, 5370–5371 (1991)
Buryachenko, V.A.: Micromechanics of Heterogeneous Materials. Springer, NY (2007)
Madenci Erdogan, A.B., Phan, N.D.: Peridynamic unit cell homogenization. In: 58th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA SciTech Forum. AIAA, Grapevine, TX (2017)
Arroyo, M.B.T.: Finite crystal elasticity of carbon nanotubes based on the exponential Cauchy–Born rule. Phys. Rev. B. Condensed Matter. 69, 115415 (2004)
Credit Authors Contribution Statement
Dan Wu: Conceptualization, Methodology, Simulation, Analysis, Original draft, Graphs, Editing. Editing, Review. Yin Yu: Analysis, Resources, Review. Yile Hu: Methodology, Software, Simulation, Analysis, Review, Editing.
Declaration of Competing Interest
The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
Data Availability
The datasets generated and/or analyzed during the current study are available from the corresponding author on reasonable request.
Acknowledgements
This work is supported by National Natural Science Foundation of China under Grant No. 11902197 and Ye Qisun Fund under Grant No. U2241266. The corresponding author is grateful to the research grant for young scholar by Shanghai Jiao Tong University.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2024 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Wu, D., Yu, Y., Hu, Y.L. (2024). A Peridynamic Micro-Scale Model for Predicting Mechanical Properties of Graphene. In: Li, S. (eds) Computational and Experimental Simulations in Engineering. ICCES 2023. Mechanisms and Machine Science, vol 145. Springer, Cham. https://doi.org/10.1007/978-3-031-42987-3_1
Download citation
DOI: https://doi.org/10.1007/978-3-031-42987-3_1
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-42986-6
Online ISBN: 978-3-031-42987-3
eBook Packages: EngineeringEngineering (R0)